TEST SWITCHES TEST SWITCHES - Brooks Utility
TEST SWITCHES TEST SWITCHES - Brooks Utility
TEST SWITCHES TEST SWITCHES - Brooks Utility
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ROTO-<strong>TEST</strong> Switches<br />
Roto-Test Switches<br />
The Roto-Test Switch is the result<br />
of years of experience and<br />
research in the manufacture of<br />
testing devices for instruments,<br />
relays and meters, and it achieves<br />
a mechanical and electrical<br />
perfection never before attained in<br />
a device for this purpose.<br />
It combines safety and efficiency,<br />
saves time and space and<br />
embodies all the desired features<br />
for safe, speedy and dependable<br />
relay and meter testing.<br />
With the Roto-Test Switch, relays<br />
and meters may be tested at the<br />
turn of a key without<br />
disconnecting for service. Overcurrent<br />
relays may be tested in any<br />
one phase without disturbing the<br />
others, thereby providing partial<br />
protection during the testing<br />
period. The switch can be used for<br />
transfer of relays and meter<br />
circuits for quick testing without<br />
removing any wiring.<br />
28<br />
RATING-30 AMPERES 600 VOLTS<br />
MULTIPLE<br />
COMBINATIONS<br />
These switches are available in<br />
four, six, ten, twelve, fourteen,<br />
sixteen, eighteen and twenty pole<br />
combinations. Switches mount on<br />
the rear of the switchboard and the<br />
face plate appears on the front of<br />
the board. This highly efficient and<br />
effective installation, not only<br />
conserves space on the<br />
switchboard and matches other<br />
instruments and installations.<br />
DIVERSIFIED<br />
APPLICATIONS<br />
The Roto-Test switch can be<br />
applied to any type of switchboard<br />
and used with all standard makes<br />
of instruments, relays and meters.<br />
ABSOLUTELY SAFE<br />
The Roto-Test switch is the safest<br />
device of its kind on the market.<br />
Its mechanical construction is such<br />
that it is practically impossible for<br />
any parts to loosen up in operation<br />
and cause trouble. Perfect contact<br />
is maintained between blades<br />
and clips.<br />
No live parts are exposed–only the<br />
face plate appears on the front of<br />
the board.<br />
Heavy Textolite (Bakelite) case and<br />
Rotor provide positive insulation.<br />
Test of relays and meters is made<br />
from front of board on test studs<br />
without any connection or<br />
disconnection and without<br />
interruption of service.<br />
It is impossible to trip the circuit<br />
breakers when testing. However,<br />
any relay may be cut out by the<br />
operator should emergency<br />
demand it.