Operating manual SAB 202

Operating Manual - SAB 202
Maintenance instructions
Checking the oil
Operating hours between main inspections
See chart for main inspections
20,000h 30,000h 40,000h
HCFC R717 HCFC R717 HCFC R717
Service schedules
Number of operating hours from initial
start-up and after each main inspection
(see footnote)
50
● ● ● ● ● 200
● ● ● ● ● ● 1,000
● ● ● ● ● ● 2,500
● ● ● ● ● ● 5,000
● X ● X ● X 10,000
X ● X ● X ● 15,000
✡ ✡ ● X ● X 20,000
● ● ● ● 25,000
✡ ✡ X X 30,000
● ● 35,000
✡ ✡ 40,000
●
X
✡
It is advisable to assess the oil as described in the section “Activities during service inspection” in the
Service manual.
It is advisable to assess the oil as described in the section “Activities during service inspection” in the
Service manual.
If this assessment is not made, the oil charge must be replaced with fresh oil.
The oil charge must be replaced with fresh oil.
Service schedules after initial start-up of compressor.
Service schedules after each main inspection.
Note:
It is not advisable to reuse oil drained from compressor or plant. This oil has absorbed the moisture in the
air and is likely to cause operating problems.
Always turn off the power to the heating rod before draining off oil.
0175-168 - ENG
Rev. 2005.09
29/38