Torqeedo Ultralight 402

Take the screws out of the screw anchors.
Place the aluminum key onto one of the screw
anchors. The aluminum key prevents the screw
anchor from turning when the screw is screwed
in.
Place the screw anchor in one of the boreholes.
Please note that the screw anchor needs to fit
easily through the borehole without being
compressed at the sides.
If possible, place the white plastic plate with 8
holes from the inside of the kayak over the screw
anchor. This reinforces the kayak hull at the
mounting point.
If this is not possible, the screw anchors can be
fixed without the plastic plate.
Put a screw through the aluminum key into the
screw anchor. Firmly tighten the screw while
fixing the screw anchor with the aluminum key.
Kayak inside
Note that the screw anchor will expand on the
inside of the kayak. Chose a position for the
wall anchor which allows sufficient space for
this expansion.
16 Operating Manual Ultralight 402