Operating manual 27.01.2010 Flow-through Chiller - HUBER

More documents

Recommendations

Info

Chapter 3: Taking the Flow-through Chiller out of service The following sections can be found in this chapter: - Decommissioning - Transport - Disposal 15
Decommissioning Safety notice and policy 16 Caution! - Injury to persons or property possible: - Danger of slippage due to contaminated floor and working area. - Danger of tipping due to insufficient stability. - Danger of electric shock due to faulty power connection. - Danger of burns at extreme temperatures if touched. - Danger of chemical burns of the eyes, skin or airway due to emission of dangerous vapours (with the appropriate thermal fluid). - Leakage of fluid remnants to be caught in a collecting vessel. Machine and floor contamination to be removed at once! All safety notices are essential and must be considered when working according to the operating manual! Switching off Set main switch (36) to “O”. Disconnect the thermostat from the power supply. Transport The Flow-through Chiller is now decommissioned and ready for transportation. The original packing material should be used as far as possible, and the Flow-through Chiller must always be transported in the upright position. Disposal To minimise environmental pollution, please dispose of the Flow-through Chiller only via suitably licenced and experienced disposal or recycling companies.
Page 1: Valid for: DC30-NR (with natural re
Page 4 and 5: Foreword Dear Customer, The Huber t
Page 6 and 7: Description of Safety and Informati
Page 8 and 9: Duties of responsible person The op
Page 10 and 11: Operating conditions Your applicati
Page 12 and 13: Chapter 2: Connnect the flow-throug
Page 14 and 15: Start up All models must be transpo
Page 18: BESTÄTIGUNG / CONFIRMATION An / To

Operating manual 27.01.2010 Flow-through Chiller - HUBER

Create successful ePaper yourself

Delete template?

Save as template?