You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Accessories</strong><br />
<strong>Catalogue</strong>
CONTENT<br />
Preparing<br />
2 Polyurock<br />
Modeling<br />
3 ABF-wax<br />
Investing<br />
4 Univest ® Plus<br />
4 Univest ® Rapid<br />
4 Multivest<br />
Casting<br />
5 Crucible<br />
5 Meteor MP<br />
6 Borax<br />
6 Boric Acid<br />
Soldering<br />
6 Meteor MP<br />
7 V-Flux<br />
7 Fluxor<br />
7 Solflux<br />
7 Stopor<br />
8 Solder Pencil<br />
Pickling<br />
8 Desoxid I<br />
8 Desoxid II<br />
Finishing<br />
9 Cerasiv Brown<br />
9 Cerasiv Blue<br />
10 Burs<br />
12 Discs<br />
12 Polisher<br />
13 Mandrels<br />
14 Bur table<br />
Polishing<br />
15 Legabril Diamond<br />
15 Cerabril
Preparing<br />
2<br />
POLYUROCK<br />
Polyurock is a dual component model resin, offering excellent mechanical properties. High hardness value<br />
and strong intermolecular cohesion bonds produce models that benefit the dental technician with models<br />
less effected by shock impact from benchwork and during transportation.<br />
Polyurock is compatible with alginates, hydrocolloids, various types of silicones, and many other impression<br />
materials. Polyurock can also be supplied with Polyurock release spray which should be used with polyethers<br />
(Impregum), vinyl polysiloxanes, thioelastomers, metals (posts, implants, attachments), and plastics<br />
(burn-out posts, Zeiser plates, Model Trays, etc.).<br />
Ordering Information<br />
400003587 Kit<br />
400003556 Release Spray<br />
400003558 Mixer<br />
400003755 Colour blue<br />
400003756 Colour black<br />
400003757 Colour red<br />
400003758 Colour yellow<br />
The Polyurock Kit is made of:<br />
1x Base 1 kg<br />
1x Catalyst 200 ml<br />
25 Cups 100 ml<br />
25 Cups 50 ml<br />
50 Spatulas
Modelling<br />
ABF-WAX<br />
3<br />
ABF waxes are characterised by their unique composition, that guarantees exceptional properties<br />
during use:<br />
• They separate very well (therefore no residues is left on the surface)<br />
• They ensure an excellent compactness and a superb brightness after working<br />
• They allow quick and easy use<br />
• They allow the technician to select the appropriate hardness for the application<br />
• They burn out without leaving residue in the ring<br />
• They ensure an excellent passivity and a high degree of precision<br />
Creativ<br />
Special<br />
Tecno<br />
Universal<br />
Margin<br />
Position<br />
light and dark: As their name indicates these waxes make it possible to create the esthetics,<br />
that will provide your Wax-up with character. A light version to ensure basic colouring and a<br />
dark version to generate typical shade in the fissures. In the liquid stade these waxes still remain<br />
opaque.<br />
This modeling wax has a pleasant texture, is very clean and allows excellent visual control.<br />
This wax is ideal for use with pressable ceramic systems.<br />
This extra hard milling wax, offers excellent resistance to creaks and chips at the edges, and is<br />
ideal to be used with or without rotary instruments.<br />
The universal wax per excellence. It can be easily used for any type of modeling, in particular<br />
for the construction of occlusal surfaces, coronal walls and armatures.<br />
This extremely stable wax is typically used for the first layers of the coping and the secondary<br />
parts of the milling technique. Its name is there to indicate its greater stability at the marginal<br />
edge and ensures a high degree of precision of the coping.<br />
This positioning wax has a high degree of adherence, offers an excellent solution when<br />
attaching the spruing elements. An ideal adherence is obtained when used at a temperature<br />
above 20° C.<br />
Name Colour Working Hardness<br />
Temperature<br />
Universal blue 65°C average<br />
Creativ light beige 66°C hard<br />
Creativ dark brown 66°C hard<br />
Special gray 66°C hard<br />
Margin red 67°C average<br />
Position orange 20–30°C flexible<br />
Tecno green 64°C very hard<br />
Wax Wire blue 66°C hard<br />
Ordering Information<br />
400003474 Universal<br />
400003475 Creativ light<br />
400003476 Creativ dark<br />
400003480 Special<br />
400003473 Margin<br />
400003477 Tecno<br />
400003478 Position<br />
400003482 Complete kit (8 boxes)<br />
300000066 Wax Wire
Investing<br />
4<br />
UNIVEST ® PLUS<br />
Graphite-free, phosphate-bonded precision investment for all precious and non-precious alloys.<br />
Setting time: 60 minutes<br />
Standard preheating: 600°C up to 900°C<br />
• Precise castings<br />
• Extremely smooth surfaces<br />
• Fine grain<br />
• Easy to devest<br />
• Total expansion: 3.8 %<br />
Ordering Information<br />
300000053 uniVest Plus incl. liquid 2 x 2.0 kg<br />
300000054 uniVest Plus incl. liquid 30 x 150 g<br />
300000056 uniVest Plus incl. liquid 20 kg<br />
300000055 Liquid 1000 ml<br />
UNIVEST ® RAPID<br />
Graphite-free, phosphate-bonded precision high heat investment for all precious and non-precious alloys.<br />
Setting time: 20 minutes<br />
Standard preheating: 600°C up to 900°C or high heat<br />
• Precise castings<br />
• Very smooth surfaces<br />
• Very fine grain<br />
• Easy to devest<br />
• Total expansion: 3.2 %<br />
Ordering Information<br />
300000057 uniVest Rapid incl. liquid 30 x 150 g<br />
300000058 Liquid 1000 ml<br />
MULTIVEST<br />
multiVest brings optimum manageable expansion with crowns and bridges made of precious metals, non-precious<br />
metals, casting molds and pressable ceramic.<br />
multiVest produces convincing results with fast-firing and standard pre-heating. After just 15 minutes the muffle<br />
can be fired in the warmed pre-heating furnace. In the case of standard pre-heating, the muffle is placed in the<br />
cold pre-heating furnace after a drying period of 60 minutes.<br />
• Extraordinarly universal<br />
• High precision<br />
• Standard and speed heating<br />
• Cost efficiency<br />
• Easy to use<br />
Ordering Information<br />
300003440 multiVest incl. liquid 32 x 160 g<br />
300003441 Liquid for multiVest 1200 ml
Casting<br />
CRUCIBLE<br />
5<br />
Hooded quartz crucible for the melting of all types of dental alloys with an open flame.<br />
It is strongly recommended to have a dedicated crucible for each alloy to avoid cross contamination.<br />
Ordering Information<br />
400002603 Large Kerr Crucible<br />
400002604 Crucible Degussa<br />
METEOR MP<br />
Universal blowtorch system for the melting and soldering of alloys. Meteor is safe to handle and ensures<br />
consistent, high quality results.<br />
Blowpipe Meteor O: For casting, universal and bonding alloys – Melting with oxygen-propane.<br />
Blowpipe Meteor A: For casting alloys – Melting with compressed air-propane.<br />
Blowpipe Meteor O-NP: For non-precious alloys – Melting with oxygen-propane.<br />
Ordering Information<br />
200004429 Complete set<br />
200004426 Universal handle<br />
200004422 Blowpipe Meteor O<br />
200004427 Blowpipe Meteor O-NP<br />
200004424 Blowpipe Meteor A<br />
200004425 Blowhead O<br />
200004428 Blowhead O-NP<br />
O-NP<br />
O<br />
The Meteor MP complete set:<br />
• 1 Universal handle<br />
• 1 Blowpipe Meteor O<br />
• 1 Complete set Meteor O Micro<br />
• 1 Blowpipe Meteor L<br />
A
Casting / Soldering<br />
6<br />
BORAX<br />
Melting flux. For all casting alloys with a solidus temperature less than 1000°C / 1832°F. For open flame or induction<br />
melting. By applying Borax, oxidation of the alloy during melting is avoided. Glazing of crucibles with<br />
Borax yields excellent casting results.<br />
Ordering Information<br />
400001545 Borax 100 ml<br />
BORIC ACID<br />
High fusing flux. For all casting alloys with a solidus temperature greater than 1000°C / 1832°F. For open flame<br />
or induction melting. By applying Boric Acid, oxidation of the alloy during melting is avoided. Glazing of<br />
crucibles with Boric Acid yields excellent casting results.<br />
Ordering Information<br />
400001546 Boric Acid 80 ml<br />
METEOR MP<br />
Precision blowtorch system for soldering with oxygen-propane.<br />
Meteor O Micro: For the precise soldering of joints without affecting or softening the surrounding alloy.<br />
Blowpipe Meteor L: For general soldering with oxygen-propane.<br />
Ordering Information<br />
200004430 Complete set Meteor O Micro<br />
400002590 Blowhead O Micro<br />
200004431 Needle holder O Micro<br />
200004432 3 Needles<br />
200004423 Blowpipe Meteor L<br />
200004426 Universal handle Meteor MP L
Soldering<br />
V-FLUX<br />
7<br />
Liquid soldering flux for furnace soldering of casting or bonding alloys after bonding.V-Flux is easy to apply<br />
to the solder joint. Its high viscosity helps to keep the Vacu PF or Vacu-2 solder rods in position. V-Flux<br />
does not spread over adjacent porcelain surfaces during heating.<br />
Ordering Information<br />
400001549 V-Flux 20 ml<br />
FLUXOR<br />
Paste flux for the open flame soldering of all precious metal alloys. During heating of the workpiece,<br />
Fluxor solidifies at a comparatively low temperature. With increasing temperatures, the crystals transform<br />
into a viscous cover providing complete protection from oxidation. In addition, Fluxor will aid in the<br />
desoxidation of casting alloys.<br />
Ordering Information<br />
200004397 Fluxor 7.0 g<br />
SOLFLUX<br />
Flux for the soldering of non-precious to precious elements such as an extension to a framework or the<br />
addition of retention. Excellent for soldering precious metals to attachments, milled secondary parts on a<br />
framework base or orthodontic work.<br />
Ordering Information<br />
200004399 Solflux 7.0 g<br />
STOPOR<br />
Zirconia based anti-flux paste. Stopor limits the spreading of the liquid solder to the immediate vicinity of<br />
the joint, thus contamination of attachment and occlusal surfaces is prevented. By applying Stopor to<br />
soldering joints in the vicinity of the porcelain, discoloration is avoided. Stopor is excellent in<br />
covering oxidation-sensitive medium and low-precious metal alloys. Grinding and polishing<br />
time of the surfaces is therefore greatly reduced.<br />
Ordering Information<br />
200004398 Stopor 10.0 g
Soldering/ Pickling<br />
8<br />
SOL<strong>DE</strong>R PENCIL<br />
All-metal pencil for soldering which is easy to handle and resists elevated temperatures. To be used with<br />
MP Standard solder reels and wires.<br />
Ordering Information<br />
200004421 1 Solder Pencil<br />
<strong>DE</strong>SOXID I<br />
Pickling Solution (75%) for precious metal dental alloys containing more than 50% gold.<br />
Desoxid is an extremely efficient pickling solution with numerous advantages over<br />
traditional acid pickling:<br />
• Does not produce corrosive or unpleasant fumes<br />
• Instruments and clothing do not suffer deterioration<br />
• Neither fume exhaustion nor special pickling apparatus are necessary<br />
Ordering Information<br />
400001547 Bottle 214 g<br />
200004395 4 bags<br />
<strong>DE</strong>SOXID II<br />
Pickling Solution (63%) for precious conventional dental alloys containing less than 50% gold.<br />
Desoxid is an extremely efficient pickling solution with numerous advantages over<br />
traditional acid pickling:<br />
• Does not produce corrosive or unpleasant fumes<br />
• Instruments and clothing do not suffer deterioration<br />
• Neither fume exhaustion nor special pickling apparatus are necessary<br />
Ordering Information<br />
400001548 Desoxid II 63% bottle 243 g<br />
200004396 Desoxid II 63% 4 bags
Finishing<br />
CERASIV BROWN<br />
9<br />
Grinding tips based on ceramic-bonded refined corundum for high and medium gold bonding alloys.<br />
Cerasiv Brown has the following characteristics:<br />
• Excellent cutting efficiency<br />
• Fine cutting grain structure<br />
• Wide range of cutting speed (5000 – 12000 rpm)<br />
• High precision due to high stability shaft<br />
• Long lifetime with consistant grain structure during wear<br />
3<br />
1<br />
Ordering Information<br />
200004497 Cerasiv Brown 1 12 pcs./ box<br />
200004499 Cerasiv Brown 3 12 pcs./ box<br />
CERASIV BLUE<br />
Grinding points made of pure alumina for palladium based and non-precious bonding alloys.<br />
Cerasiv Blue has the following characteristics:<br />
• Carbon-free<br />
• Fine cutting grain structure<br />
• Wide range of cutting speed (5000 – 12000 rpm)<br />
• High precision due to high stability shaft<br />
• Long lifetime with constant grain structure during wear<br />
1<br />
3<br />
Ordering Information<br />
200004498 Cerasiv Blue 1 12 pcs./ box<br />
200004500 Cerasiv Blue 3 12 pcs./ box
Finishing<br />
10<br />
BURS<br />
REF<br />
TC 1<br />
TC 21<br />
Size 004 005 006 007 008 009 010 012 014 016 018 021 023 027<br />
008 009 010 012 018<br />
Pcs.<br />
10 10 10 10 10 10 10 10 10 10 10 10 10 10<br />
10 10 10 10 10<br />
SAP N°<br />
300004498<br />
300004499<br />
300004500<br />
300004501<br />
300004502<br />
300004503<br />
300004504<br />
300004505<br />
300004506<br />
300004507<br />
300004509<br />
300004510<br />
300004511<br />
300004512<br />
300004517<br />
300004519<br />
300004520<br />
300004521<br />
300004522<br />
REF<br />
TC 21 L<br />
TC 21 UX<br />
TC 23<br />
TC 23 R<br />
TC 23 RS<br />
TC 23 RUX<br />
TC 30<br />
Size 010 012 008 010 012 010 012 009 010<br />
010<br />
008 010 012 014<br />
Pcs.<br />
10<br />
10 10 10 10 10 10<br />
10 10<br />
10<br />
10 10 10 10<br />
SAP N°<br />
300004523<br />
300004524<br />
300004525<br />
300004526<br />
300004527<br />
300004528<br />
300004529<br />
300004531<br />
300004532<br />
300004534<br />
300004513<br />
300004514<br />
300004515<br />
300004516<br />
REF<br />
Size<br />
Pcs.<br />
TC 33 MRS<br />
010<br />
10<br />
TC 71 UX TC 73 UX TC 73 UFX<br />
TC 77 UX TC 77 UFX<br />
TC 79 PSX TC 79 UX<br />
023 014 014<br />
023 060 023<br />
070 040<br />
1 1 1<br />
1 1 1<br />
1<br />
1<br />
SAP N°<br />
300004533<br />
300004537<br />
300004538<br />
300004559<br />
300004539<br />
300004540<br />
300004560<br />
300004550<br />
300004541<br />
REF<br />
TC 79 UFX<br />
TC 79 MDX<br />
TC 79 NPQ<br />
TC 79 PMQ<br />
TC 97<br />
TC 129 UX<br />
TC 129 UFX<br />
TC 129 MDX<br />
TC 129 NPQ<br />
TC 129 PMQ<br />
Size 040 040 040 040 010<br />
023 023 023 023 023<br />
Pcs.<br />
1 1 1 1 3<br />
1<br />
1<br />
1<br />
1<br />
1<br />
SAP N°<br />
300004561<br />
300004552<br />
300004571<br />
300004581<br />
300004535<br />
300004542<br />
300004562<br />
300004553<br />
300004572<br />
300004582<br />
REF<br />
TC 136 UX TC 136 UFX TC 136 MDX TC 136 NPQ TC 138 UX<br />
TC 138 UFX<br />
TC 138 MDX<br />
TC 138 NPQ<br />
TC 138 PMQ<br />
Size<br />
016 016 016 016<br />
014 023 023 023<br />
014<br />
023<br />
023<br />
Pcs.<br />
1 1 1 1<br />
1 1<br />
1<br />
1<br />
1<br />
1<br />
1<br />
SAP N°<br />
300004543<br />
300004565<br />
300004554<br />
300004575<br />
300004544<br />
300004545<br />
300004566<br />
300004555<br />
300004576<br />
300004577<br />
300004583
Finishing<br />
BURS<br />
11<br />
REF<br />
TC 139 UX<br />
TC 139 UFX<br />
TC 139 MDX<br />
TC 139 NPQ<br />
TC 139 PMQ<br />
TC 219<br />
TC 251 PX<br />
TC 251 UX<br />
TC 251 UFX<br />
Size<br />
Pcs.<br />
023 023 023 023 023<br />
023<br />
060 040 060 060<br />
1 1 1<br />
1<br />
1<br />
3<br />
1<br />
1 1<br />
1<br />
SAP N°<br />
300004546<br />
300004567<br />
300004556<br />
300004578<br />
300004584<br />
300004536<br />
300004551<br />
300004547<br />
300004548<br />
300004568<br />
REF<br />
TC 251 MDX<br />
TC 251 NPQ<br />
TC 251 PMQ<br />
TC 261 UX<br />
TC 261 UFX<br />
TC 261 MDX<br />
TC 261 NPQ<br />
TC 261 PMQ<br />
TC 295 UFX<br />
Size<br />
Pcs.<br />
060 060 060 023 023 023 023 023<br />
023<br />
1 1<br />
1 1<br />
1 1<br />
1<br />
1<br />
1<br />
SAP N°<br />
300004557<br />
300004579<br />
300004585<br />
300004549<br />
300004569<br />
300004558<br />
300004580<br />
300004586<br />
300004570<br />
3,5 mm<br />
2,5 mm<br />
2,5 mm<br />
5 mm<br />
6 mm<br />
10,5 mm<br />
6 mm<br />
7 mm<br />
10 mm<br />
1 mm<br />
REF<br />
Cerasiv blue<br />
Cerasiv brown<br />
733 GM<br />
649 GF 661 GF 671 GF 621 GF<br />
Size 1 3 1 3 035 025 025 050 060<br />
Pcs. 12 12 12 12 10 10 10 10 10<br />
SAP N°<br />
200004498<br />
200004500<br />
200004497<br />
200004499<br />
300004600<br />
300004601<br />
300004602<br />
300004603<br />
300004604<br />
10.000 – 15.000 rpm<br />
20.000 – 30.000 rpm
Finishing<br />
12<br />
DISCS / POLISHER<br />
B<br />
L<br />
REF<br />
911 HF 911 HC 942 F<br />
943 C<br />
946 AC<br />
964 HF<br />
Size<br />
0.17<br />
180 220 0.1 180 220 0.17 220<br />
0.15 080 100<br />
0.15 220 0.3<br />
300<br />
Pcs.<br />
1 1 1 1 1<br />
1<br />
1<br />
1<br />
1<br />
SAP N°<br />
300004587<br />
300004588<br />
300004589<br />
300004590<br />
300004591<br />
300004594<br />
300004595<br />
300004593<br />
300004592<br />
15.000 rpm<br />
20.000 rpm<br />
10.000 rpm<br />
H = mm<br />
H = mm<br />
REF<br />
9500 9506 9501 9502<br />
P 9557 M P 9630 C P 9627 C P 9554 C<br />
Size<br />
H=0.3 220 H=0.2 220 H=0.6 220 H=0.6<br />
250<br />
060 070 220 220<br />
Pcs.<br />
100 100 100<br />
100<br />
10 10 10 10<br />
SAP N°<br />
300004596<br />
300004597<br />
300004598<br />
300004599<br />
300004605<br />
300004606<br />
300004607<br />
300004608<br />
15.000 rpm<br />
Universal polisher for precious metal and acrylic veneers<br />
REF<br />
Size<br />
Pcs.<br />
P 9610 M P 9611 M P 9614 M P 9615 M<br />
045 150 220 060<br />
10 10 10 10<br />
P 9584 M P 9678 M P 9575 M P 9572 M<br />
050 070 220 220<br />
10 10 10 10<br />
SAP N°<br />
300004619<br />
300004620<br />
300004621<br />
300004622<br />
300004609<br />
300004610<br />
300004611<br />
300004612<br />
Pre-polish for precious metals / Fine polish for non-precious metals<br />
Fine polish for precious metals<br />
REF<br />
Size<br />
Pcs.<br />
P 9620 F P 9621 F P 9624 F<br />
P 9625 F P 9675 F<br />
045 150 220 060<br />
220<br />
10 10 10 10<br />
10<br />
SAP N°<br />
300004613<br />
300004614<br />
300004656<br />
300004616<br />
300004615<br />
High lustre polish for precious metals and non-precious metals
Finishing<br />
POLISHER / MANDRELS<br />
13<br />
REF<br />
P 9551 C P 9550 C P 9544<br />
P 9634 M P 9646 M P 9635 F P 9648 F P 9636 VF<br />
P 9649 VF<br />
Size 070 220 170<br />
Pcs. 10 10 1<br />
030 020 030 020 030 020<br />
10 10 10 10 10 10<br />
SAP N°<br />
300004617<br />
300004618<br />
300004623<br />
300004627<br />
300004628<br />
300004629<br />
300004630<br />
300004631<br />
300004632<br />
Pre-polish of non-precious metals and<br />
model cast<br />
Interspersed Diamond<br />
grit ceramic polisher for<br />
trimming, high shine<br />
polishing<br />
Universal occlusal polisher for precious metals and high lustre polishing (green)<br />
REF<br />
P 9690 P 9691 P 9692<br />
Size 260 260 260<br />
Pcs. 1 1 1<br />
SAP N°<br />
300004624<br />
300004625<br />
300004626<br />
Interspersed Diamond grit ceramic polisher for trimming, high shine polishing<br />
REF<br />
329 301 L 303 A 305 A 326<br />
Size 050 050 020 030<br />
Pcs. 1 1 1 1 1 1<br />
SAP N°<br />
300004633<br />
300004634<br />
300004636<br />
300004635<br />
300004638<br />
300004637
Finishing<br />
14<br />
BUR TABLE<br />
Precious<br />
Alloys<br />
Non Precious<br />
Alloys<br />
Cast<br />
Framework<br />
Titanium<br />
Alloys<br />
Denture<br />
Acrylics<br />
Plaster<br />
Ceramics<br />
PMQ<br />
Precious Metal Spiral Cut<br />
For shaping, trimming,<br />
contouring and corrections<br />
25.000 15.000<br />
15.000<br />
UX<br />
Universal Cross Cut<br />
For shaping, trimming,<br />
contouring and corrections<br />
25.000 15.000 15.000<br />
15.000<br />
10.000<br />
UFX<br />
Universal Fine Cross Cut<br />
For shaping, trimming,<br />
contouring and corrections<br />
25.000 15.000<br />
15.000 15.000 10.000<br />
MDX<br />
Metal Diamond Cross<br />
Cut<br />
For roughening all types<br />
of Metals prior to veneering<br />
25.000 15.000<br />
15.000 15.000<br />
NPQ<br />
Non Precious Metal<br />
Spiral Cut<br />
For shaping, trimming,<br />
contouring and corrections<br />
15.000 15.000 15.000<br />
PX<br />
Plaster Coarse Cross Cut<br />
For working on dry plaster<br />
10.000<br />
PSX<br />
Plaster Super-Coarse<br />
Cross Cut<br />
For working on wet plaster<br />
10.000
Polishing<br />
LEGABRIL DIAMOND<br />
15<br />
Legabril Diamond is a fine polishing compound containing diamond particles, for all<br />
precious and non-precious dental alloys. Particulary suitable for high gold dental<br />
alloys. Legabril Diamond can also be used to polish ceramics and composites. Time<br />
saving application in the lab.<br />
Ordering Information<br />
300000087 Legabril Diamond 50.0 g<br />
CERABRIL<br />
Felt polishing wheels, with diamonds embedded, to achieve the ultimate smoothness<br />
and gloss on dental porcelain.<br />
Easy to use and highly effective. No additional polishing paste required.<br />
Cerabril has a long lifetime and maintains its properties until completely worn<br />
out. It is even effective in finishing porcelain surfaces in the dental office.<br />
Cerabril is not recommended for intraoral use.<br />
Ordering Information<br />
200004402 Cerabril, cylindric form 14 pcs./ box<br />
200004403 Cerabril 14 pcs./ box
AFFILIATES<br />
Metalor Dental (Deutschland) GmbH<br />
Augustenstrasse 124<br />
D-70197 Stuttgart<br />
Phone +49 (0) 1803 638 2567<br />
Fax +49 (0) 1803 638 2329<br />
www.metalordental.de<br />
Metalor Dental (France) SAS<br />
Immeuble Le Sirius<br />
9, rte du Colonnel Marcel Moraine<br />
F-92360 Meudon<br />
Phone +33 (0)1 46 99 95 60<br />
Fax +33 (0)1 46 99 95 61<br />
www.metalordental.com<br />
Metalor Dental (Iberoamérica) S.A.<br />
Avda. Diagonal 468, 5º A<br />
E-08006 Barcelona<br />
Phone +34 933 032 311<br />
Fax +34 933 074 707<br />
www.metalordental.com<br />
Metalor Dental Products (UK) Ltd.<br />
Suite 10, The Green<br />
Fountain Street, Macclesfield<br />
Cheshire SK10 1JN<br />
Phone +44 (0)845 070 3595<br />
Fax +44 (0)162 542 3558<br />
www.metalordental.com<br />
Metalor Dental (Hong Kong) Ltd.<br />
Suite 1705-9, The Metropolis Tower<br />
10 Metropolis Drive<br />
Hung Hom<br />
Kowloon, Hong Kong<br />
Phone +852 2521 4131<br />
Fax +852 2365 1711<br />
www.metalordental.com<br />
Metalor Dental (Korea) Ltd.<br />
8F. Shinhan Bldg. 2-42<br />
Yangjae 1-dong<br />
Seocho-gu<br />
Seoul, Korea<br />
Phone +82 (0)2 575 3848<br />
Fax +82 (0)2 575 2641<br />
www.metalordental.com<br />
Metalor Dental AG<br />
Schweiz / Suisse / Svizzera<br />
Bittertenstrasse 15<br />
CH-4702 Oensingen<br />
Phone +41 (0) 800 292 292<br />
Fax +41 (0) 62 388 69 70<br />
www.metalordental.com<br />
Metalor Dental (USA) inc.<br />
255 John L.Dietsch Blvd<br />
P.O.Box 255<br />
02761 North Attleboro, MA<br />
USA<br />
Phone +1 800 554 5504<br />
Fax +1 508 695 3447<br />
www.metalordental.com<br />
HEADQUARTERS<br />
Metalor Dental AG<br />
Switzerland<br />
Bittertenstrasse 15<br />
CH-4702 Oensingen<br />
Phone +41 (0) 62 388 69 69<br />
Fax +41 (0) 62 388 69 70<br />
www.metalordental.com<br />
MD-en2065.0305/00<br />
09007 – 0104 Rev. 02