RainMaster Evolution DX2 Controller Owners Manual - Irrigation Direct

Rain Master Irrigation Systems
DX2 User Manual
SELECT ACCESS LEVEL
|F1|=LEVEL 1 |F2|=LEVEL 2 ||
Figure 69: Select Access Level
Step 19
Step 20
There are two options:
• LEVEL 1
• LEVEL 2
Press F1 to select Level 1 or press F2 to select
Level 2. The previous menu is then displayed.
Access Code
Select F3=CHANGE CODE and enter the new
access
code. The code must be three digits.
ACCESS CODE:
ENTER ACCESS CODE
||
Figure 70: Select Access Level
Step 21
Press the Up Arrow to return to the previous menu.
Repeat as necessary.
This completes the User Options procedure.
Press QUIT key to return to base menu.
Configuration Procedure
The Configuration Options allow a controller to be set up to
operate as a submaster or satellite and with or without Flow
Max, in a Central Control System.
Chapter 4: Setup Page 79