Catalogue System ALUCA - Oulie-Hansen as

6 The system
System
7
“One for all!”
ALUCA’s modular principle.
ALUCA’s customized van racking
systems consist of different
unit heights, depths and widths
(A, B, C).
All fitted elements used in practice
(1- 8) are available in these
basic dimensions.
1
1
SUPPORT FRAMES
• Heavy-duty aluminium design
with standardized pre-punched
holes for all components with a
grid of 25 mm
• 13 unit heights:
von 250 mm to 1350 mm
• 5 unit depths:
250 mm, 320 mm,
420 mm, 520 mm, 735 mm
• Width of support frame 30 mm
4
SHELF COMPARTMENT
BASE
• 6 unit widths:
360 mm, 460 mm, 705 mm
950 mm, 1195 mm, 1440 mm
• Edge raised 100 mm at side
and back
• Trough upper edge with
integrated system strip
to hold dividers
7
SHELF FLAPS
• Made of torsion-free anodized
aluminium extruded profile
• For shelf compartments, shelf
and shelf compartment base
• With shelf and compartment
base, swivels down fully
• Heights 125 and 175 mm
Actual projection:
100 and 150 mm
The units can be planned and installed
in accordance with our
customer’s precise criteria and
requirements.
There is almost no limit to what
ALUCA’s in-vehicle systems can
provide.
A
UNIT HEIGHTS
• 13 unit heights:
from 250 mm to 1350 mm
B
UNIT DEPTHS
• 5 unit depths:
250 mm, 320 mm,
420 mm, 520 mm, 735 mm
C
FIELD WIDTHS
• 6 unit widths:
360 mm, 460 mm, 705 mm,
950 mm, 1195 mm, 1440 mm
A
B
2
5
3
7
7
C
8
4
6
9
2
SIDE WALL
• To cover the equipment block
at the side
• Pre-punched holes 34 x 34 mm
for additional tool holders
3
DRAWER
• With an ergonomic central lock
and safety latch on both sides
• Can be provided with a lock
as an option; lock can also be
retrofitted
• Trim panel made of anodized
aluminium extruded profiles
• Scope for division using mats,
dividers and plastic bin sets for
drawers
• 4 unit widths:
360 mm, 460 mm, 705 mm,
950 mm
• Drawer heights:
100 mm, 150 mm, 200 mm
250 mm, 300 mm,
• Full drawer pullout with arrester
if opened completely
• Drawer pullout can be divided to
remove full drawer
5
TROUGH TRAY
• 2 variants: 1. Back: 100 mm,
Front 100 mm;
2. Back 100 mm and front
50 mm high
• Use with flap or shelf bracket
• 6 unit widths:
360 mm, 460 mm, 705 mm,
950 mm, 1195 mm, 1440 mm
• 4 unit depths:
250 mm, 320 mm, 420 mm,
520 mm
6
DOOR ELEMENT
• Lockable door element made of
aluminium
• Door arrester possible at left or
right
• Field width: 460 mm
• 11 heights: 400 - 1300 mm
8
PULLOUT FOR CASE
• For aluminium or plastic case
• One-hand operation and safety
latch at both sides
• Field width: 460 mm
• also available with lock
• Lock can also be retrofitted
9
SHELF
• 4 unit widths
(unit depth 715 mm and 735 mm
in 3 unit widths) with width
950 mm incl. shelf reinforcement
• Installed at an angle or rotated,
also as a storage compartment
for a small parts case, storage
magazines and systainer (applies
to field widths 360, 460,
705 mm)
• As a top closing element
for drawer preassembled
drawer units
Accessories:
ALUCA offers a range of
accessories, which transforms
the racking inside the
van into a fully functional
and safe place to work.