TC65 AT Command Set

TC65 AT Command Set
14.3 AT^SCKS
s
14.3 AT^SCKS Query SIM and Chip Card Holder Status
This command controls the SIM connection presentation mode and queries the connection status of the SIM and
the card holder tray of the TC65.
The query can be used for the locally attached and remote SIM's as well. For details regarding Remote SIM
Access refer to AT^SRSA.
Syntax
Test Command
AT^SCKS=?
Response(s)
^SCKS:(list of supported s)
OK
Read Command
AT^SCKS?
Response(s)
^SCKS: ,
OK
ERROR
+CME ERROR:
Write Command
AT^SCKS=
Response(s)
OK
ERROR
+CME ERROR:
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge Last
SIEMENS ! % % % % % % ! % !
Unsolicited Result Code
^SCKS:
During startup, and if the TC65's SIM connection status has changed an unsolicited result code (URC) is issued.
Command Description
The read command returns the URC presentation mode and the status of the SIM card connection.
The write command enables or disables the presentation of URCs to report whether or not the SIM card is connected.
If the ME is powered down or reset (AT+CFUN or AT^SMSO) the current presentation mode setting will
not be retained. Therefore the setting =1 needs to be restored after power on the TC65 or may be saved
in the user profile (AT&W).
Parameter Description
(num)(&W)(&V)
0 (&F) Suppress unsolicited result codes
1 Output unsolicited result codes
TC65_ATC_V02.000 Page 405 of 567 6/2/06
Confidential / Released