Command Reference - KYOCERA Document Solutions

More documents

Recommendations

Info

PRESCRIBE <strong>Command</strong> <strong>Reference</strong> RWER S — [Read/Write External Resource] Store TrueType font Format Parameters RWER S, medium, font-type, file-name, font-name, length[, value, style, weight, type-face];binary-data WRED; medium: drive specification: 0 = hard disk or RAM disk A = memory card font-type: font type: 0 = TrueType font 1 = Japanese TrueType font 2 = Japanese TrueType Collection font file-name: file name: (string of up to 11 characters; the extension .INF is added internally.) This string must be enclosed in either single or double quotation marks. font-name: font name (ASCII text string up to 31 characters long; only up to 28 characters if fonttype = 2). This string must be enclosed in either single or double quotation marks. length: value: style: weight: font data length (number of bytes sent as binary data) font symbol set value (1 to 65535, 619: Shift JIS code) font style (0 to 32767) stroke weight (-127 to +127) type-face: type face (0 to 32767) 246
RWER S binary-data: font data (TrueType format) Function The RWER S command allows outline fonts (in TrueType format) to be downloaded to the printing system and to be stored on the specified media as font data. TrueType fonts particularly can be defined easily just by adding the TrueType font format as binarydata. Always explicitly terminate the end of font data using WRED;. The five bytes represented by WRED; are not counted as part of the font data length. Since value, style, weight and type-face represent font attributes they have an affect during font selection. Although they may be omitted, we recommend that all parameters be used to define font selection information. In order to delete a Japanese TrueType font defined using this command, it is necessary to delete two separate file names using RWER D, ’xxxxxx’ and RWER D, ’xxxxxx.inf’. Up to 512 fonts may be registered on a single memory card or up to 4096 on a single hard disk. Note carefully that registration beyond this limit will result in data being interpreted as unneeded. Only 28 characters are valid for Japanese TrueType font names when font-type = 2 is specified because the system automatically appends (P) for proportional fonts and (F) for fixed pitch fonts. A command error will result and the command has no effect if any of the parameters are outside the given range. This command is ignored if even one parameter error occurs. The font data following the semicolon for this command must match the length given by length. An error will result and the font data will not be defined if the data length is shorter than specified. 247
Page 1 and 2:
PRESCRIBE Commands Command Referenc
Page 3 and 4:
Typeface Trademark Acknowledgement
Page 5 and 6:
Table of Contents Overview of PRESC
Page 7 and 8:
MRPA — Move to Relative Position
Page 9 and 10:
VMAL — Virtual Mailbox ALias —
Page 11 and 12:
PRESCRIBE Command Reference
Page 13 and 14:
Overview of PRESCRIBE Commands by F
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
PRESCRIBE Commands 2. PRESCRIBE Com
Page 23 and 24:
ACLI File !R! RES; DAM; UNIT C; SFN
Page 25 and 26:
ALTB C ALTB C — [ALlocate TaBle]
Page 27 and 28:
ALTB E ALTB E — [ALlocate TaBle]
Page 29 and 30:
ALTB R ALTB R — [ALlocate TaBle]
Page 31 and 32:
ALTB T ALTB T — [ALlocate TaBle]
Page 33 and 34:
ALTF ALTF — change to ALTernate F
Page 35 and 36:
AMCR AMCR — call Automatic MaCRo
Page 37 and 38:
ARC ARC — draw filled-in ARC Form
Page 39 and 40:
ARC Printout Related Command PARC 2
Page 41 and 42:
ASTK ASTK — Assign STacKer trays
Page 43 and 44:
BARC BARC — draw BARCode Format P
Page 45 and 46:
BARC Table 20 Characters that can b
Page 47 and 48:
BKLT BKLT — print in BooKLeT bind
Page 49 and 50:
BLK BLK — draw filled-in BLocK Fo
Page 51 and 52:
BOX BOX — draw BOX Format Paramet
Page 53 and 54:
CALL CALL — CALL macro Format Par
Page 55 and 56:
CCPY CCPY — Carbon CoPY Format Pa
Page 57 and 58:
CCPY Printout 47
Page 59 and 60:
CID CID — Configure color-Image D
Page 61 and 62:
CIR CIR — draw CIRcle Format Para
Page 63 and 64:
CLIP CLIP — CLIP current path For
Page 65 and 66:
CLPR File !R! RES; UNIT C; NEWP; SP
Page 67 and 68:
CLSP Printout Related Command NEWP
Page 69 and 70:
CMOD CMOD — Color MODe COLOR Form
Page 71 and 72:
COPY Printout 61
Page 73 and 74:
CPTH CPTH — Character PaTH Format
Page 75 and 76:
CSET 9R = Windows 3.1 Latin/Cyrilli
Page 77 and 78:
CSTK CSTK — select Collator STacK
Page 79 and 80:
CTXT Printout 69
Page 81 and 82:
DAM DAM — Delete All Macros Forma
Page 83 and 84:
DAP Printout 73
Page 85 and 86:
DELM DELM — DELete Macro Format P
Page 87 and 88:
DPAT DPAT — select Dashed PATtern
Page 89 and 90:
DRP DRP — Draw to Relative Positi
Page 91 and 92:
DRPA DRPA — Draw to Relative Posi
Page 93 and 94:
DUPX DUPX — select/deselect DUPle
Page 95 and 96:
DXPG File The following example sel
Page 97 and 98:
DZP Printout Related Command PDZP 8
Page 99 and 100:
EMCR Function The EMCR command allo
Page 101 and 102:
ENDC ENDC — END carbon Copy Forma
Page 103 and 104:
ENDM ENDM — END Macro Format Para
Page 105 and 106:
ENDR ENDR — END Raster data Forma
Page 107 and 108:
EPL EPL — select EcoPrint Level F
Page 109 and 110:
FDIR FDIR — MP tray Feed DIRectio
Page 111 and 112:
FILL File !R! RES; UNIT C; SIMG 1;
Page 113 and 114:
FLAT FLAT — set FLATness Format P
Page 115 and 116:
FLST Sample of Font List Internal S
Page 117 and 118:
FONT FONT — change current FONT F
Page 119 and 120:
FPAT FPAT — generate Fill PATtern
Page 121 and 122:
FRPO FRPO — Firmware RePrOgram Fo
Page 123 and 124:
FRPO INIT FRPO INIT — FRPO-INITia
Page 125 and 126:
FSET typeface: Function typeface as
Page 127 and 128:
FSET File !R! UNIT P; SFNT ’Swiss
Page 129 and 130:
FTMD Font mode Character spacing Au
Page 131 and 132:
GPAT GPAT — set Gray PATtern Form
Page 133 and 134:
GRAY GRAY — represent GRAY COLOR
Page 135 and 136:
GRRD c:¥> echo !R! STR 300; MZP 1,
Page 137 and 138:
HUE When color is other than 0, a p
Page 139 and 140:
INTL For example, the character ass
Page 141 and 142:
JOBD JOBD — JOB Deletion Format P
Page 143 and 144:
JOBL JOBL — print JOB List Format
Page 145 and 146:
JOBO JOBO — JOB Output Format Par
Page 147 and 148:
JOBP JOBP — JOB, print with Print
Page 149 and 150:
JOBS JOBS — JOB Start Format Para
Page 151 and 152:
JOBS virtual mailbox specification
Page 153 and 154:
JOBT JOBT — JOB Terminate Format
Page 155 and 156:
LAPI LAPI — LoaD API Program Form
Page 157 and 158:
LDFC bit-map: dot pattern of the ch
Page 159 and 160:
LDFN C Function The LDFN C command
Page 161 and 162:
LDFN F type: font type: 0 = charact
Page 163 and 164:
LDFN S Function The LDFN S command
Page 165 and 166:
LGHT Default contrast Contrast set
Page 167 and 168:
MAP Printout Related Commands MRP,
Page 169 and 170:
MCRO MCRO — define MaCRO Format P
Page 171 and 172:
MDAT MDAT — set MeDia type ATtrib
Page 173 and 174:
MID MID — Multi-tray ID Format Pa
Page 175 and 176:
MRP MRP — Move to Relative Positi
Page 177 and 178:
MRPA MRPA — Move to Relative Posi
Page 179 and 180:
MSTK MSTK — select Mailbox STacKe
Page 181 and 182:
MTYP File To print on the A4 label
Page 183 and 184:
MZP Printout Related Commands MAP,
Page 185 and 186:
OTRY OTRY — select paper Output T
Page 187 and 188:
PAGE PAGE — start new PAGE Format
Page 189 and 190:
PANT Process Yellow Process Magenta
Page 191 and 192:
PARC Printout 181
Page 193 and 194:
PAT Resident Fill Patterns (300 dpi
Page 195 and 196:
PCRP File !R! RES; UNIT C; NEWP; SP
Page 197 and 198:
PCZP File !R! RES; UNIT C; PMZP 3,
Page 199 and 200:
PDIR Portrait (PDIR 0;) Landscape (
Page 201 and 202:
PDRP PDRP — in Path, Draw to Rela
Page 203 and 204:
PDZP PDZP — in Path, Draw to Zero
Page 205 and 206: PELP PELP — in Path, draw ELlipse
Page 207 and 208: PIE PIE — draw PIE chart Format P
Page 209 and 210: PMRA PMRA — in Path, Move to Rela
Page 211 and 212: PMRP PMRP — in Path, Move to Rela
Page 213 and 214: PMZP PMZP — in Path, Move to Zero
Page 215 and 216: PNCH PNCH — PuNCH Format Paramete
Page 217 and 218: PRBX PRBX — in Path, draw Round B
Page 219 and 220: PRRC PRRC — in Path, at Relative
Page 221 and 222: PSRC PSRC — select Paper SouRCe F
Page 223 and 224: !R! !R! — PRESCRIBE start sequenc
Page 225 and 226: RCLT RCLT — Rotated CoLlaTion For
Page 227 and 228: RDMP Sample 217
Page 229 and 230: RES Underline thickness and distanc
Page 231 and 232: RGBL RGBL — control RGB Level COL
Page 233 and 234: RGST RGST — offset ReGiSTration F
Page 235 and 236: RPF RPF — Return to Previous Font
Page 237 and 238: RPG Printout Related Command SCG 22
Page 239 and 240: RPP Printout Related Command SCP 22
Page 241 and 242: RPU RPU — Return to Previous Unit
Page 243 and 244: RTTX Printout 233
Page 245 and 246: RTXT File !R! RES; UNIT P; SFNT ’
Page 247 and 248: RVCL RVCL — ReceiVe CoLor raster
Page 249 and 250: RVRD The following examples produce
Page 251 and 252: RWER F RWER F — [Read/Write Exter
Page 253 and 254: RWER L RWER L — [Read/Write Exter
Page 255: RWER R Related Command The followin
Page 259 and 260: RWER W RWER W — [Read/Write Exter
Page 261 and 262: RWRF F RWRF F — [Read/Write Resou
Page 263 and 264: RWRF P RWRF P — [Read/Write Resou
Page 265 and 266: RWRF W RWRF W — [Read/Write Resou
Page 267 and 268: RWRF W Function The RWRF W command
Page 269 and 270: SATU SATU — adjust SATUration lev
Page 271 and 272: SBM Printout 261
Page 273 and 274: SCAP Printout 263
Page 275 and 276: SCCS Printout Related Commands RPCS
Page 277 and 278: SCF Printout Related Command RPF 26
Page 279 and 280: SCG Printout Related Commands FILL,
Page 281 and 282: SCP SCP — Save Current Position F
Page 283 and 284: SCPI Printout Related Command SCS 2
Page 285 and 286: SCRC SCRC — Set Command Recogniti
Page 287 and 288: SCS SCS — Set Character Spacing F
Page 289 and 290: SCU SCU — Save Current Unit Forma
Page 291 and 292: SDP SDP — Store Dash Pattern Form
Page 293 and 294: SEM SEM — Set Emulation Mode Form
Page 295 and 296: SETF Printout 285
Page 297 and 298: SFA height: U/I: weight: maximum he
Page 299 and 300: SFA Printout 289
Page 301 and 302: SFNT height parameter is omitted, t
Page 303 and 304: SGPC SGPC — Set kcGl Pen Color CO
Page 305 and 306: SIMG SIMG — Set IMaGe model Forma
Page 307 and 308:
SIMG File !R! RES; UNIT C; NEWP; PM
Page 309 and 310:
SIMP File !R! RES; UNIT C; SIMP 3;
Page 311 and 312:
SLJN SLJN — Set Line JoiN Format
Page 313 and 314:
SLM SLM — Set Left Margin Format
Page 315 and 316:
SLPI SLPI — Set Lines Per Inch Fo
Page 317 and 318:
SLPP Printout 307
Page 319 and 320:
SMLT SMLT — Set Miter LimiT Forma
Page 321 and 322:
SMNT SMNT — Set MoNiTor simulatio
Page 323 and 324:
SPAL SPAL — Select PALette COLOR
Page 325 and 326:
SPD File !R! RES; UNIT C; STM 2; SL
Page 327 and 328:
SPL Printout 317
Page 329 and 330:
SPO File !R! RES; SFNT ’TimesNewR
Page 331 and 332:
SPSZ Function The SPSZ command sets
Page 333 and 334:
SPW Printout Related Command SRM 32
Page 335 and 336:
SRM Printout Related Command SPW 32
Page 337 and 338:
Width Height SRO presentation-mode
Page 339 and 340:
SROP CALL DBOX,2; CALL DBOX,3; RES;
Page 341 and 342:
STAK STAK — select paper STAcKer
Page 343 and 344:
STAT Sample Status Page User status
Page 345 and 346:
STM Printout 335
Page 347 and 348:
A STPL STPL — STaPLe Format Param
Page 349 and 350:
STR STR — SeT dot Resolution Form
Page 351 and 352:
STRK Printout Related Commands FILL
Page 353 and 354:
SULP Printout 343
Page 355 and 356:
TEXT TEXT — print TEXT Format Par
Page 357 and 358:
TPRS TPRS — Text PaRSing Format P
Page 359 and 360:
UNIT UNIT — set UNIT of measureme
Page 361 and 362:
UOM UOM — Unit Of Measurement per
Page 363 and 364:
VMAL VMAL — Virtual Mailbox ALias
Page 365 and 366:
VMPW VMPW — set Virtual Mailbox P
Page 367 and 368:
WIDE WIDE — set WIDE A4 mode Form
Page 369 and 370:
XBAR XBAR — print two dimensional
Page 371 and 372:
XBCP 0 XBCP 0 — select barcode ty
Page 373 and 374:
XBCP 2 XBCP 2 — specify error cor
Page 375 and 376:
XBCP 4 XBCP 4 — set data code wor
Page 377 and 378:
XBCP 6 XBCP 6 — determine aspect
Page 379 and 380:
XBCP 7 XBCP 7 — determine bar hei
Page 381 and 382:
XBCP 9 XBCP 9 — enable truncation
Page 383 and 384:
XBCP 11 XBCP 11 — enable block co
Page 385 and 386:
XBCP 13 XBCP 13 — enable sender I
Page 387 and 388:
XBCP 15 XBCP 15 — enable file siz
Page 389 and 390:
XBCP 17 XBCP 17 — allow control o
Page 391 and 392:
XBCP 18 XBCP 18 — enable Macro PD
Page 393 and 394:
XBCP 19 XBCP 19 — position symbol
Page 395 and 396:
XBCP 19 Printout 2 File 3 To print
Page 397 and 398:
XBUF XBUF — define a BUFfer name
Page 399 and 400:
XPAT XPAT — generate eXpanded fil
Page 401 and 402:
Index
Page 403 and 404:
Firmware, 111 initializing, 113 Rep
Page 405:
macro PDF417, 381 naming buffer, 38
Page 408:
Rev. 4.5 2006.6
show all

Command Reference - KYOCERA Document Solutions

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?