Rittal – Small Enclosures

Compact system enclosures Rittal CM
Accessories
Combination options:
Depth 300 mm
One-piece/
8 3
Cable gland
Divided/
Cable gland
Divided/
Cable clamp
strip, centre
Divided/
Cable clamp
strip, rear
Divided/
Cable clamp
strip, centre and
rear
Divided/
1 x grommets
Divided/
2 x grommets
EMC
2 8 1
1
9
5
2
1
Gland plates
Select suitable gland plates depending on
the application. The following examples
illustrate the individuality of cable entry
design. Potential equalisation is provided via
assembly components and earthing points.
Depth 400 mm
4 8
2 8 3 8
1
5
3
9 2 2
9 1 5 2
6 1
6 3
6
7
6
1
2
For enclosure width
mm
600 800 1000 1200
Model No.
1 5001.210 5001.211 5001.212 5001.213
2 5001.214 5001.215 5001.216 5001.217
3 5001.218 5001.219 5001.220 5001.221
4 5001.222 5001.223 5001.224 5001.225
6 5001.226 1) 5001.227 1) 5001.228 1) 5001.229 1)
1) Cable entry grommets see Cat. 31,
page 965.
Design
Material:
Sheet steel, zinc-plated, passivated
Protection category:
IP 55 if mounted correctly.
Supply includes:
1 piece, including assembly parts.
Note:
For greater stability and universal cable
entry, the base opening is divided in the
width for 1000 and 1200 mm wide
enclosures, and is suitable for various
configurations.
Key:
1 Gland plate, depth 50 mm
2 Gland plate, depth 100 mm
3 Gland plate, depth 150 mm
4 Gland plate, depth 250 mm
5 Section for cable entry, centre,
see Cat. 31, page 965.
6 Cable entry plate, depth 100 mm,
see above.
Grommets, see Cat. 31, page 965
7 EMC gland plate,
see Cat. 31, page 958.
8 Cable glands,
see Cat. 31, page 972.
9 Section for cable entry, rear,
see page 61.
Order example:
CM 5120.500
(W/H/D 1000 x 1200 x 400 mm)
– On the left, two-piece gland plates with
cable clamp strip
– On the right, one-piece gland plate
5
1 3
4
You will need:
5 2 sections for cable entry, centre,
TS 8802.100, see Cat. 31, page 965
(Packs of 4)
1 1 gland plate, depth 50 mm, 5001.212
3 1 gland plate, depth 150 mm, 5001.220
4 1 gland plate, depth 250 mm, 5001.224
Rittal Small Enclosures
35