ABS LIFTING STATION SANIMAT 1000 S-1 (GB).indd
ABS LIFTING STATION SANIMAT 1000 S-1 (GB).indd
ABS LIFTING STATION SANIMAT 1000 S-1 (GB).indd
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
D+W<br />
<strong>ABS</strong> <strong>LIFTING</strong> <strong>STATION</strong> <strong>SANIMAT</strong> <strong>1000</strong> S-1<br />
Technical Data<br />
Inlet Vent Discharge Motor Speed Rated Cable ‡ Weight **<br />
port port connection power* at 50 Hz voltage and length<br />
P 1<br />
P 2<br />
rated current<br />
DN DN DN DN kW kW min -1 V A m kg<br />
Sanimat <strong>1000</strong> S-1/W 100 (3 x) 70 (3 x) 70 Sleeve 4” DN 100 1.70 1.20 2900 220-240 ~ 5.7 4+1.5 50<br />
Sanimat <strong>1000</strong> S-1/D 100 (3 x) 70 (3 x) 70 Sleeve 4” DN 100 1.70 1.20 2900 400 3 ~ 3.3 4+1.5 50<br />
* P 1<br />
= Power taken from mains; P 2<br />
= Power at motor shaft ‡Tank Control Unit 4 m, Control Unit 1.5 m ** Additional weight of the hand membrane pump = 13 kg<br />
Supplied as Standard: Tank with pump, automatic level control, and control box, non-return valve, 4” sleeve and flange.<br />
Performance Curve 50 Hz<br />
H<br />
[m]<br />
8<br />
H = Total head<br />
Q = Discharge volume<br />
Curves to ISO 9906<br />
6<br />
4<br />
2<br />
Q<br />
(m³/h)<br />
Q<br />
[l/s]<br />
0<br />
0<br />
0<br />
5<br />
10 15 20<br />
2.5<br />
5.0<br />
25<br />
7.5<br />
Performance curve for 60 Hz is available on request.<br />
30<br />
35<br />
10<br />
Materials<br />
Tank________________________________________Polyethylene<br />
Motor housing _______________________Cast Iron EN-GJL-250<br />
Rotor Shaft _________________ Stainless Steel 1.4021 (AISI 420)<br />
Volute_______________________________________Polyethylene<br />
Impeller ____________________________Cast Iron EN-GJL-250