John Deere Combines

John Deere Combines 67
Header resume switches
1. Button 1 lets you return to preselected
header height for long stubble crops.
Ideal for harvesting crops such as rape
or sunfl owers or to raise the platform
at the end of the fi eld.
2. Button 2 lets you maintain a preset
stubble height in standing cereals, for
example, using ground contact of the
mechanical sensors.
3. Button 3 lets you maintain a preset
header ground pressure for perfect
contour following in laid crops.
HeaderTrak lets you have full, simple, intuitive control over
every aspect of the automated header functions. You can
customize the auto header setup via the HeaderTrack
display and header resume switches on the master control
lever. Switching the individual elements of the system on
and off will result in the three presets on the multifunction
lever changing functions. ▶ ◀ These arrows
show the chosen function is active.
Performance Pack (Optional on T- & C-Series combines):
There’s a reason we call this the Performance Pack. The combination of the new
ProDrive transmission, Harvest Smart, and Harvest Monitor adds considerably to your
combine’s mechanical performance, as well as its data collection and feedback skills.
ProDrive – Finally, an automatic shift transmission for your combine! You’ll love the
simplicity it brings to combine operation, especially in hilly ground and diffi cult
harvest conditions. There’s no stopping required to change gears while harvesting.
Harvest Smart – In simple terms, this system controls the combine’s speed, based on
the amount of crop material coming into the machine (Capacity Mode) or the amount
of material being lost (Smart Mode). Though used successfully since 2005, pairing
Harvest Smart with ProDrive dramatically boosts overall effi ciency. Why? Because
when Harvest Smart dictates a speed increase or decrease, ProDrive ensures that the
speed goal is achieved.
Harvest Monitor – This yield monitoring system records all your important harvest
data, including yields, moisture, and crop, farm and fi eld totals. It consists of three
components: a highly accurate moisture sensor, a yield sensor, and a monitor now
integrated into the CommandCenter display. The instantaneous data display helps
you make machine adjustments as you go.