2013 National Space & Missile Materials Symposium
2013 National Space & Missile Materials Symposium
2013 National Space & Missile Materials Symposium
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1700 - 1725 Ultra High Temperature<br />
Mechanical Testing of<br />
ZrB2-ZrC Based<br />
Ceramics, Mr. Eric<br />
Neuman, Missouri<br />
University of Science &<br />
Technology<br />
Char Depth Measurements<br />
of Arc Jet Samples for<br />
Comparison with Hollow a<br />
Erothermal Ablation and<br />
Temperature (HEAT) Sensor<br />
Data in Support of MEDLI,<br />
Dr. Erika Rodriguez, ERC,<br />
Inc./NASA Ames Research<br />
Center<br />
1725 - 1830 Happy Hour in the Exhibit Hall (Sponsored by Scot Forge)<br />
Wednesday, 26 June <strong>2013</strong><br />
0700 - 0745 Speaker Breakfast for Wednesday Presenters<br />
0700 - 0800 Attendee Continental Breakfast (Sponsored by Ultramet)<br />
1330 - 1900 Exhibits & Poster Session Open<br />
0700 - 1700 Registration<br />
Concurrent Sessions<br />
Hypersonics<br />
Session Organizers: Mr.<br />
Andy Swanson, AFRL; Mr.<br />
Mitch Petervary, Boeing;<br />
Mr. Jim Ledesma,<br />
Boeing; Dr. Brian Sullivan,<br />
MR&D; Mr. Mr. David<br />
Brewer, NASA LaRC<br />
Planetary Orbit & Exploration<br />
Technologies<br />
Session Organizers: Mr. Mike<br />
Fuller, Dr. Anthony Calomino,<br />
Ms. Beth Kelsic, Dr. Sylvia<br />
Johnson, Dr. Suraj Rawal, Mr.<br />
Pat Sisson, Mr. Eric Becker,<br />
Mr. Brian Hill, Dr. Jack Agee,<br />
Mr. John Vickers, Mr. Rich<br />
Wegrich, Dr. Charlie<br />
Camarda<br />
0800 - 0805 Session Intro Session Intro Session Intro<br />
0805 - 0830 HTV2, Mr. Bob Wetherall,<br />
Lockheed Martin<br />
Interfacial Design of Ablative<br />
Composite <strong>Materials</strong>, Dr.<br />
Tapan Desai, Advanced<br />
Coolig Technologies, Inc.<br />
0830 - 0855 Ultra-High Energy Lithium-Ion<br />
Cells Made With Advanced<br />
Nano-Si Negatives for<br />
Military Applications, Dr.<br />
John Fan, American Lithium<br />
Energy Corporation<br />
0855 - 0920 Passive Leading Edge<br />
Testing, Mr. James<br />
Ledesma, The Boeing<br />
Company<br />
0920 - 0945 A New Calibration-Based<br />
Inverse Method for<br />
<strong>Space</strong>d-Based (Lunar) Thin-<br />
Film Deposition Technology<br />
for Solar Power, Astronomical<br />
and Directed Energy<br />
Applications, Mr. Michael<br />
Fulton, Surface Optics<br />
Corporation<br />
Controlled Temperature<br />
Testing Techniques for<br />
Advanced Application<br />
Techniques for Depositing<br />
Ceramic Thermal Control<br />
Material Systems (TCMS)<br />
on Composite Structures,<br />
Mr. Michael Kenny, ALION<br />
Science and Technology<br />
<strong>Space</strong> <strong>Materials</strong><br />
Experiments, Modeling, &<br />
Simulation<br />
Session Organizers: Mr.<br />
Shane Juhl, AFRL; Mr. Chip<br />
Frohlich, Boeing; Mr. John<br />
Vasquez, Naval Research<br />
Laboratory; and Mr.<br />
Derek Doyle, AFRL<br />
Fabrication of<br />
Membranes, Patterned<br />
Films and Embedded<br />
Structures, Dr. David<br />
Taylor, The Aerospace<br />
Corporation<br />
MISSE in MAPTIS, Mr.<br />
DeWitt Burns, NASA MSFC<br />
Bent Panel Thermo-<br />
Structural Test<br />
Development, Mr.<br />
Michael Dion, <strong>Materials</strong><br />
Research & Design, Inc.<br />
To Be Announced