2013 National Space & Missile Materials Symposium

0945 - 1015 Break
Estimating Surface Heat
Flux, Dr. Jay Frankel, UTK
1015 - 1040 Mechanical Testing of
Compliant Thermal
Barriers for Multi-Purpose
Crew Vehicle, Mr.
Jeffrey DeMange,
University of
Toledo/NASA GRC
1040 - 1105 Ceramic Matrix
Composite Fracture
Toughness Post-Test
Data Correlation, Mr.
Edward Klock-McCook,
Materials Research &
Design, Inc.
1105 - 1130 FAST, Dr. Bill Garver,
Lockheed Martin
1130 - 1155 Ceramic Matrix
Composites for
Hypersonic Radomes
and Apertures, Mr. Steve
Atmur, ATK COI
Ceramics
1155 – 1300 Lunch Break
Composite Materials and
Metal Interfaces at Sub-77 K
Temperatures for Space
Applications, Mr. Mark
Haynes, Composite
Technology Development,
Inc.
Low SWaP Semiconductor
Laser Transmitter Modules for
Space Mission Applications,
Dr. Alex Rosiewicz, EM4, Inc.
Materials Selection and
Evaluation for Insulation of
High Voltage Antennas for
Space Propulsion, Power and
Communication, Dr. John
Slough, MSNW, LLC
Development of Radiation
Hard GaN Devices and
Systems, Dr. Ke-Xun Sun,
University of Nevada, Las
Vegas
Thermal Performance of
Flexible, High Temperature
Aerogel Composite
Insulation, Dr. Frances Hurwitz,
NASA Glenn Research Center
Space Access &
Propulsion
Session Organizers: Mr. Tim
McKechnie, Plasma
Processes, LLC: Mr. Alan
Brown, Pratt & Whitney
Rocketdyne; Mr. John
Koenig, Southern
Research Institute; Mr.
Wes Sanderson, Missile
Defense Agency; Mr. Jerry
Brockmeyer, Ultramet
Corporation; and Dr.
Diane Wiley, Ind.
Consultant
HydroCarbon Boost TPA
Kick Pump Impeller
Materials & Processes
Development, Mr. Albert
Contreras, Aerojet
Carbon-Carbon Nozzle
Extension for the RL10
Engine, Mr. Raj
Narayanan, Carbon
Carbon Advanced
Technologies, Inc.
Domestically Available
Lyocell C-C for Nozzle
Extensions and
Component, Ms. Leslie
Weller, MR&D
Lyocell C/C Test Panel
and Large Scale
Deomonstration Article
Mfg & Evaluation, Mr.
Jacques Cuneo, Southern
Research Inst