GE Fanuc Automation - Automation Service Srl

B–63525EN/01
PREFACE
PREFACE
Description of
this manual
1.Display and operation
This chapter covers those items, displayed on the screen, that are related
to maintenance. A list of all supported operations is also provided at the
end of this chapter.
2.LCD mounted type i Series hardware
3.Stand–alone type i Series hardware
4.Matters common to both LCD–mounted type and Stand–alone type
i Series hardware
Chapters 2 to 4 describes the configuration of the hardware, lists the
hardware units, and explains how to replace printed–circuit boards.
5.Data input/output
This chapter describes the input/output of data, including programs,
parameters, and tool compensation data, aswell as the input/output
procedures for conversational data.
6.Interface between the CNC and PMC
This chapter describes the PMC specifications, the system configuration,
and the signals used by the PMC.
7.Built–in ethernet
This chapter describes the built–in ethernet.
8.Digital servo
This chapter describes the servo tuning screen and how to adjust the
reference position return position.
9.AC spindles
These chapters describe the spindle amplifier checkpoints, as well as the
spindle tuning screen.
10.Trouble shooting
This chapter describes the procedures to be followed in the event of
certain problems occurring, for example, if the power cannot be turned on
or if manual operation cannot be performed. Countermeasures to be
applied in the event of alarms being output are also described.
Appendix
The appendix consists of a list of all alarms, a list of maintenance parts,
and boot system.
This manual does not provide a parameter list. If necessary, refer to the
separate PARAMETER MANUAL.
p–1