Amphenol Aerospace

More documents

Recommendations

Info

Backshells Quick Reference of Products, cont. Shrink Boot Adapter • A good solution when the unshielded cables are terminated with heat shrink boots. It has a groove where the boot lip can be held which provides good grip apart from sufficient space inside for the cable looping. • Using the heat shrink boot is one way of providing environmental protection and strain relief to cable termination. Using a suitable adapter is essential here to ensure the repairability. Crimp Ring Adapter • Many cable terminations where heat shrink boots are used will require provision for terminating the screens too. It is achieved in this type of backshell through a ring, which can be crimped to the backshell body holding the screens in between. <strong>Amphenol</strong> 38999 III HD Dualok II I SJT Accessories Aquacon Herm/Seal PCB HIgH SPEED Fiber Optics Contacts Connectors Cables Band Lock Adapter • Another method of termination of screens. A high quality band will do the job in this backshell. Tempered bands are tightened over the shields, which is pulled over the banding area, using a special assembly tool. • Suitable over cover by heat shrink boot or some other method as chosen by the designer could be used. • Both crimp ring and banded terminations give a low DC resistance. EMI Filter Transient 26482 Matrix 2 83723 III Matrix|Pyle Pre-Shield Adapter • Supplied with some length of braid attached. This braid overlaps with the cable braid. • Effective shielding takes place due to the 360° contact of the braid. • Designed to accept heat shrink boot. • Ease of assembly saves time for cable termination. 26500 Pyle 5015 Crimp Rear Release Matrix 22992 Class L SQ Adapter • Another cost-effective way to terminate the braid to the adapter. The cost-effective braid is pulled over the conical shape to the rear end of the adapter and then tied. The end nut is tightened to ensure adequate grip for the shielding. • A heat shrink boot can be used with this adapter also. Note: The SQ adapter style is not covered in this catalog section; for more information go to www.backshellworld.com Back- Shells Options Others For more information on Backshells visit www.backshellworld.com • or email: sales@backshellworld.com 481
<strong>Amphenol</strong> Backshells Quick Reference of Products, cont. 38999 III HD Dualok II I SJT Accessories Aquacon Herm/Seal PCB HIgH SPEED Fiber Optics Contacts Connectors Cables Quick Clamp • A light weight clamp used for securing and “tidying up” cable into a desired direction. • Used in interior wiring of aircraft. Strain Relief Clamps • Another cost effective cable holding option when environmental protection is not a concern, and weight savings is a major consideration. • Secures and “tidys-up” the cable and also provides good strain relief at the termination area. EMI Filter Transient 26482 Matrix 2 Grommet Nut • Provides a good grommet-holding force for the crimp connectors when expensive and heavy backshells are not used. Such holding force is essential to hold the contacts and grommet in place when terminated with wire bundles. 83723 III Matrix|Pyle 5015 26500 Pyle Options Back- 22992 Others Shells Class L Crimp Rear Release Matrix Lamp Thread Adapter • An adapter with threads similar to that in the lamp base for shield termination. • An effective, easy and quick method of shield termination and field maintenance. • Termination area can accept a nut as well as a clamp. The nut option enables the use of heat shrink boot and the clamp option will facilitate the strain relief clamping without heat shrink boot after the shield/cable termination. Note: The lamp thread adapter style is not covered in this catalog section; for more information go to www.backshellworld.com 482 For more information on Backshells visit www.backshellworld.com • or email: sales@backshellworld.com
Page 1 and 2:
Amphenol Products for Military, Aer
Page 3 and 4:
Amphenol Aerospace Amphenol Aerospa
Page 5 and 6:
Amphenol Aerospace Amphenol New Pro
Page 7 and 8:
Amphenol Aerospace MIL-DTL-38999, S
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Amphenol MIL-DTL-38999, Series III,
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
38999 HD Dualok II I SJT EMI Filter
Page 29 and 30:
Amphenol Aerospace Boeing BACC63 Ho
Page 31 and 32:
38999 III HD Dualok II I SJT Access
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Amphenol Aerospace D38999/29 & D389
Page 45 and 46:
Page 47 and 48:
EMI Filter Transient 26482 Matrix 2
Page 49 and 50:
Page 51 and 52:
38999 III HD Dualok TV01( II CTV01(
Page 53 and 54:
Page 55 and 56:
Amphenol Aerospace Custom Designed
Page 57 and 58:
Amphenol Aerospace High Vibration D
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Amphenol Aerospace JT00R (MS27472)
Page 71 and 72:
Amphenol Aerospace JT01R Series II
Page 73 and 74:
Page 75 and 76:
Amphenol Aerospace JTG06R (MS27484)
Page 77 and 78:
Amphenol Aerospace JTL07R Series II
Page 79 and 80:
Amphenol Aerospace JT00 (MS27475) S
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Amphenol Aerospace LJT00R (MS27466)
Page 87 and 88:
Amphenol Aerospace LJT01R Series I
Page 89 and 90:
Amphenol Aerospace LJT06R (MS27467)
Page 91 and 92:
Amphenol Aerospace LJT00 (MS27469)
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Amphenol Aerospace Series I, LJT Br
Page 99 and 100:
Amphenol Aerospace Amphenol SJT Fea
Page 101 and 102:
Amphenol Aerospace SJT Insert Avail
Page 103 and 104:
Amphenol Aerospace SJTP02RE - Crimp
Page 105 and 106:
Amphenol Aerospace SJTIY - Hermetic
Page 107 and 108:
Amphenol Aerospace MIL-DTL-38999 Ba
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Amphenol Aerospace SJT - Accessorie
Page 121 and 122:
Page 123 and 124:
Amphenol Aerospace 38999, Series I
Page 125 and 126:
Page 127 and 128:
Amphenol Aerospace Aquacon Immersib
Page 129 and 130:
Amphenol Aerospace Aquacon Series I
Page 131 and 132:
Amphenol Aerospace AJ Aquacon Inser
Page 133 and 134:
Amphenol Aerospace AJ6 / AS6 Aquaco
Page 135 and 136:
Amphenol Aerospace AJ7 / AS7 Aquaco
Page 137 and 138:
Amphenol Aerospace Aquacon Series P
Page 139 and 140:
Amphenol Aerospace Aquacon Series C
Page 141 and 142:
Amphenol Aerospace Amphenol High Sp
Page 143 and 144:
Page 145 and 146:
Amphenol Aerospace Amphenol ® Circ
Page 147 and 148:
Amphenol Aerospace Circular Connect
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Amphenol Fiber Optic Interconnects
Page 189 and 190:
Page 191 and 192:
Amphenol Aerospace 90° Multi-Mode
Page 193 and 194:
Amphenol Aerospace CF38999 Multi-Ch
Page 195 and 196:
Amphenol Aerospace Multi-Channel Fi
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Amphenol Aerospace JSFC15 Wall Moun
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Amphenol Aerospace Fiber Optic Cabl
Page 213 and 214:
Amphenol High Frequency Contacts CO
Page 215 and 216:
Page 217 and 218:
Amphenol Aerospace High Speed Coax
Page 219 and 220:
Amphenol Aerospace Cable Systems wi
Page 221 and 222:
Amphenol Aerospace Cable Usage Guid
Page 223 and 224:
Amphenol Aerospace Cable Usage Guid
Page 225 and 226:
Amphenol Aerospace Quadrax Contacts
Page 227 and 228:
Amphenol Aerospace Quadrax Contacts
Page 229 and 230:
Page 231 and 232:
Amphenol Aerospace New “Split-Pai
Page 233 and 234:
Amphenol Aerospace Differential Twi
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Amphenol Aerospace Micro D-Twinax T
Page 241 and 242:
Amphenol Aerospace Micro D-Twinax T
Page 243 and 244:
Amphenol Aerospace Insert Arrangeme
Page 245 and 246:
Amphenol Aerospace Coaxial Contacts
Page 247 and 248:
Page 249 and 250:
Amphenol Aerospace Matched Impedanc
Page 251 and 252:
Amphenol Aerospace High Frequency C
Page 253 and 254:
Amphenol Aerospace Twinax Contacts
Page 255 and 256:
Amphenol Aerospace Triax Contacts f
Page 257 and 258:
Amphenol Aerospace Coax, Twinax & T
Page 259 and 260:
Amphenol Aerospace Insert Arrangeme
Page 261 and 262:
Amphenol Aerospace Insert Patterns
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Amphenol Aerospace High Speed Conta
Page 269 and 270:
Amphenol EMI/EMP Filter Protection
Page 271 and 272:
Amphenol Aerospace EMI Capabilities
Page 273 and 274:
Page 275 and 276:
Amphenol Aerospace Filter Selection
Page 277 and 278:
Amphenol Aerospace Impedance Matchi
Page 279 and 280:
Page 281 and 282:
Amphenol Aerospace How to Order - S
Page 283 and 284:
Amphenol Aerospace How to Order Two
Page 285 and 286:
Amphenol Aerospace FCTV - MIL-DTL-3
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
Page 303 and 304:
Amphenol Aerospace FLJT - MIL-DTL-3
Page 305 and 306:
Amphenol Aerospace FLJT - MIL-DTL-3
Page 307 and 308:
Page 309 and 310:
Page 311 and 312:
Page 313 and 314:
Amphenol Aerospace FSJT - MIL-DTL-3
Page 315 and 316:
Amphenol Aerospace FSJT - MIL-DTL-3
Page 317 and 318:
Amphenol Aerospace S FBL - MIL-DTL-
Page 319 and 320:
Amphenol Aerospace FPT - MIL-DTL-26
Page 321 and 322:
Amphenol Aerospace FPT Jam Nut Rece
Page 323 and 324:
Amphenol Aerospace FPTE Wall Mounti
Page 325 and 326:
Amphenol Aerospace FAN (MIL-DTL-501
Page 327 and 328:
Amphenol Aerospace Transient Protec
Page 329 and 330:
Page 331 and 332:
Page 333 and 334:
Amphenol MIL-DTL-26482, Series 2, M
Page 335 and 336:
Page 337 and 338:
Page 339 and 340:
Page 341 and 342:
Amphenol Aerospace MS3471 (MB13) -
Page 343 and 344:
Page 345 and 346:
Amphenol Aerospace MS3476 (MB16) -
Page 347 and 348:
Page 349 and 350:
Page 351 and 352:
Page 353 and 354:
Page 355 and 356:
Amphenol Aerospace M83723/75 & /76-
Page 357 and 358:
Amphenol Aerospace M83723/82 & /83
Page 359 and 360:
Page 361 and 362:
Page 363 and 364:
Page 365 and 366:
Page 367 and 368:
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
Page 375 and 376:
Page 377 and 378:
Page 379 and 380:
Page 381 and 382:
Page 383 and 384:
Page 385 and 386:
Page 387 and 388:
Page 389 and 390:
Page 391 and 392:
Page 393 and 394:
Page 395 and 396:
Page 397 and 398:
Amphenol Aerospace MIL-DTL-26500, P
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Amphenol Aerospace MS24265, Pyle ®
Page 409 and 410:
Amphenol Aerospace MS24264, Pyle ZZ
Page 411 and 412:
Page 413 and 414:
Amphenol Aerospace Pyle ® ZZY, Rat
Page 415 and 416:
Page 417 and 418:
Page 419 and 420:
Page 421 and 422:
Amphenol Aerospace MIL-DTL-26500 Ty
Page 423 and 424:
Amphenol Aerospace Contacts and Acc
Page 425 and 426:
Amphenol Aerospace Shielded/Coaxial
Page 427 and 428:
Amphenol Aerospace Assembly Instruc
Page 429 and 430:
Amphenol Aerospace Accessories - C
Page 431 and 432: Amphenol Aerospace Accessories - Ca
Page 433 and 434: Amphenol MIL-DTL-5015, Matrix ® TA
Page 435 and 436: Amphenol Aerospace MIL-DTL-5015 Cri
Page 449 and 450: Amphenol Aerospace MS3450, MIL-DTL-
Page 455 and 456: Amphenol Aerospace 9817, 9818, MIL-
Page 457 and 458: 38999 III HD Dualok II I SJT Access
Page 459 and 460: Amphenol Aerospace MIL-DTL-5015 Acc
Page 461 and 462: Amphenol Aerospace Additional MIL-D
Page 463 and 464: Amphenol Aerospace Heavy Duty MIL-D
Page 469 and 470: Amphenol Aerospace MS (CL) 90555, M
Page 471 and 472: Amphenol Aerospace MS (CL) 90557, M
Page 473 and 474: Amphenol Aerospace MIL-DTL-22992, C
Page 479 and 480: Backshells from Amphenol PCD TABLE
Page 481: Amphenol Backshells Quick Reference
Page 485 and 486: Amphenol Backshells How to Select a
Page 497 and 498: Amphenol Environmental EMI/RFI Back
Page 501 and 502: ØB 38999 III HD Dualok II I SJT Ac
Page 533 and 534:
Page 535 and 536:
Page 537 and 538:
Page 539 and 540:
Page 541 and 542:
Page 543 and 544:
Page 545 and 546:
Page 547 and 548:
Page 549 and 550:
Page 551 and 552:
Page 553 and 554:
Page 555 and 556:
Amphenol Options, Other Products Pr
Page 557 and 558:
Amphenol Aerospace Cable Solutions
Page 559 and 560:
Page 561 and 562:
Amphenol Aerospace Power Solutions
Page 563 and 564:
Amphenol Aerospace RADSOK ® Techno
Page 565 and 566:
Page 567 and 568:
Amphenol Aerospace Micro-Miniature
Page 569 and 570:
Amphenol Aerospace Additional Circu
Page 571 and 572:
Amphenol Aerospace Additional Circu
Page 573 and 574:
Amphenol Aerospace Rectangular Inte
Page 575 and 576:
Page 577 and 578:
show all

Amphenol Aerospace

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?