Series 970 PowerTrip™ Connectors and Accessories

series 970powertrip connectorsThe power connector for extreme environmentsfirst edition • march 2013

series 970HIGH AMPACITy,harsh enviroNMENTPowerTrip The power connectorfor extreme environmentsProtect circuits with Series 970 PowerTrip connectorsThe George HW Bush, pictured above, is the first US Navysurface ship to use the Series 970 PowerTrip connector.Series 970 connectors fill the need for a militarygradeharsh environment power connector with improvedmechanical, environmental and electrical performance.PowerTrip also delivers reduced size and weight comparedto lower-density 5015 type power connectors. Featuring triplestartmating threads, crimp rear-release contacts, upgraded finishchoices and improved EMI protection, the PowerTrip connector isideal for power distribution units, hybrid electric drives, motors, and other high current,high-reliability applications.Glenair, Inc.1211 Air WayGlendale, CA91201-2497818-247-6000sales@glenair.comwww.glenair.com

Series 970 Connectors and AccessoriesIntroductionTable of ContentsIntroductionIntroduction tothe Series 970PowerTripCutaway Views, Features and Benefits.........................2Connector Selection Guide............................................3Contact System, Current Rating....................................4AGeneral Informationand ReferenceEDACBContact Arrangements ..................................................5Wire Ampacity Table and Wire Diameter Table..............8Connector Materials and Finishes.................................9Product Specification...................................................10Material and Finish Options.........................................13PowerTrip Connectors for Space Flight....................14BCable Connectors970-001 Cable Plugs...................................................15970-005 Cable Receptacles.........................................17Overmolded Turboflex Cordsets..................................19CPanel MountConnectors970-003 Square Flange Receptacles..........................20970-009 Low Profile Square Flange Receptacles........22970-013 Low Profile Square Flange w/ O-ring.............24970-008 Low Profile square Flange w/ PC Tails..........26970-012 Hermetic Receptacles....................................30970-004 Jam Nut Receptacles.....................................32970-010 Low Profile Jam Nut Receptacles..................34DFeed-Thru BulkheadConnectors970-006 Feed-Thru Bulkhead......................................36970-007 Hermetic Feed-Thru Bulkhead......................38 EFiltered Connectors240-970W Square Flange Filter Receptacle................40240-970J Jam Nut Filter Receptacle...........................42PowerTrip Powerline Filters......................................44FContacts and ToolsContacts 850-026, 850-027, 850-037, 850-038...........45Crimp Tools..................................................................48Insertion/Extraction Tools, Shield termination Tools.....49Connector Holding Tools..............................................50GAccessoriesAccessories Selection Guide.......................................51Backshells and Boots...................................................52Panel Gaskets..............................................................74Nut Plates....................................................................75Protective Covers.........................................................76H© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com1E-Mail: sales@glenair.com

Series 970 Connectors and AccessoriesIntroductionConnector Selection GuideIntroductionCable Plug withAccessory Threads970-001Cable Mount Plugs and ReceptaclesCable Receptaclewith AccessoryThreads970-005Overmolded TurboFlex CordsetsAPage 15Page 17Panel Mount ReceptaclesPage 19Square FlangeReceptacle withAccessory Threads970-003Square FlangeReceptacle, LowProfile970-009Square FlangeReceptacle, LowProfile, O-ring970-013Square FlangeReceptacle, LowProfile, PC Tails970-008Square FlangeReceptacle,Hermetic970-012Page 20Page 22Page 24Page 26Page 30Jam Nut Receptaclewith AccessoryThreads970-004Jam NutReceptacle, LowProfile970-010Filtered Jam NutReceptacle240-970JFiltered SquareFlange Receptacle240-970WPage 32Page 34Page 42Feed-Thru Bulkhead ReceptaclesPage 40Jam Nut Feed-ThruReceptacle970-006Hermetic JamNut Feed-ThruReceptacle970-007Page 36Page 38© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com3E-Mail: sales@glenair.com

IntroductionSeries 970 Connectors and AccessoriesIntroductionLouverBand Contact System, Current RatingAAbout the PowerTrip Contact SystemSeries 970 contacts are precision-machined using high conductivity copper alloy.A stamped and formed spring (“louverband”) is installed into the socket contact. Thespring is made from 6 mil beryllium copper (BeCu). Testing has demonstrated thatthis contact system outperforms conventional aerospace-grade contact systems.The louverband spring provides many points of electrical contact with the matingpin, as opposed to a few “high spots” on a conventional four-finger contact as shownin Fig. 2. The size #8 Powertrip socket contact has a total of 18 louvers. The #4 has 27louvers, and the #1/0 has 42 louvers. The louverband design offers lower voltage dropfor reduced joule heating. In addition to its electrical advantages, the louverbandalso is mechanically superior to four-finger contacts. The louverband spring hasconsistent, stable normal force, even when subjected to thousands of mating cyclesand temperature extremes.About “Last-Make, First-Break” CapabilityPowerTrip connectors should be mated and demated only after the circuit hasbeen de-energized. The Powertrip contact arrangements include layouts with size#12 and #16 contacts. These contacts are designed to mate only after the larger powercontacts are mated. When uncoupled, the size #12 and #16 contacts separate beforethe power contacts are disengaged. These smaller contacts are typically used for safetyinterlock circuits.About Current RatingPowerTrip connector current carrying capacity and maximum contact resistanceare in accordance with AS39029 specifications for conventional contacts. Testing ofPowertrip contacts has shown the contact resistance (voltage drop) to be up to 60%lower than the allowable voltage drops of AS39029. Temperature -Rise tests have alsodemonstrated the Powertrip contact to generate less heat under load than conventionalcontacts. However, the maximum safe current load is dependent on a number ofapplication-specific variables. The maximum safe current load is the combination ofthe electrical load and ambient conditions that do not exceed a maximum connectorinternal hot-spot temperature of +200° C., which is the maximum recommendedoperating temperature.Contact Resistance after 1000 Mating CyclesFigure 1LouverBand SocketContactFigure 2Conventional Contacton the Left, LouverBandContact on the Right#1/0Contact Size#4#8AS39029 SpecificationM39029 AverageLouverband Average0 20 40 60 80Contact resistance (millivolt drop)© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com4E-Mail: sales@glenair.com

Series 970 Connectors and AccessoriesTechnical ReferenceContact ArrangementsTechnicalReferenceSeries 970 Contact ArrangementsContact SizeSize #8Size #4Size #1/0Contact Contact Size and QtyArrangement #16 #12 #8 #4 #1/018-2 218-4 2 220-3 320-5 2 320-7 4 320-4 424-5 524-2 224-6 4 224-3 324-A6 3 328-4 428-9 5 432-5 532-2 232-4 2 232-3 332-6 3 336-4 440-5 5BContact Arrangements shown are mating face views of pin connectors.Socket arrangements are reversed.CONTACT ARRANGEMENTS WITH SIZE #8 CONTACTSCONTACTSYMBOLSBADABA#16 #12 #8CCB18-22 #818-42 #8, 2 #1220-33 #8DAAGABEAEBFCCBDCEDDCB20-44 #820-53 #8, 2 #1220-73 #8, 4 #1624-55 #8© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com5E-Mail: sales@glenair.com

TechnicalReferenceSeries 970 Connectors and AccessoriesTechnical ReferenceContact ArrangementsContact Arrangements shown are mating face views of pin connectors.Socket arrangements are reversed.CONTACT ARRANGEMENTS WITH SIZE #4 CONTACTSBBAEFABCABDC24-22 #424-62 #4, 4 #1224-33 #4AADAHBFBJGCECDCBFDE24-A63 #4, 3 #1228-44 #428-94 #4, 5 #16EACONTACTSYMBOLSDB#16 #12 #8 #4C32-55 #4© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com6E-Mail: sales@glenair.com

Series 970 Connectors and AccessoriesTechnical ReferenceContact ArrangementsTechnicalReferenceContact Arrangements shown are mating face views of pin connectors.Socket arrangements are reversed.CONTACT ARRANGEMENTS WITH SIZE #1/0 CONTACTSAABABBDCBC32-22 #1/032-42 #1/0, 2 #432-33 #1/0AADAFBEBEDCCBDC32-63 #1/0, 3 #1236-44 #1/040-55 #1/0CONTACT SYMBOLS#16 #12 #8 #4#1/0© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com7E-Mail: sales@glenair.com

TechnicalReferenceSeries 970 Connectors and AccessoriesTechnical ReferenceWire Ampacity and Wire DiameterBNEC Table 310.18Allowable Ampacities of Insulated Conductors Rated 0 through 2000 Volts, 200° C.Types FEP, FEPB, PFA, SA. Not More Than Three Current-Carrying Conductors inRaceway or Cable.Wire Size AWGAmbient Temp.(°C) 14 12 10 8 6 4 2 1 1/040° 36 45 60 83 110 125 171 197 22941-50° 35 44 58 81 107 121 166 191 22251-60° 34 42 56 78 103 118 161 185 21561-70° 32 41 54 75 99 113 154 177 20671-80° 31 39 52 72 96 109 149 171 19981-90° 30 37 50 69 91 104 142 164 19091-100° 28 36 47 66 87 99 135 156 181101-120° 26 32 43 59 78 89 121 140 163121-140° 22 27 37 51 67 76 104 120 140141-160° 18 23 30 42 55 63 86 99 115161-180° 13 16 21 29 39 44 60 69 80Above 180° - - - - - - - - -Wire Insulation DiametersThis table shows the minimum and maximum wire diameters compatible with Series 970connectors. Wires smaller than specified will not seal properly. Wires larger than specified willbe difficult to install and extract.Contact SizeWire Size(AWG)Finished Wire Outside DimensionsMinimum DiameterMaximum DiameterInches mm Inches mm16 16, 18 20 .053 1.35 .103 2.6212 12, 14 .085 2.16 .158 4.018 8, 10 .132 3.35 .255 6.484 4, 6 .237 6.02 .370 9.401/0 0, 2 .360 9.14 .550 14.0© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com8E-Mail: sales@glenair.com

Series 970 Connectors and AccessoriesTechnical ReferenceContact Rating, Materials and FinishesTechnicalReferenceMaterials and FinishesCOmponent MATERIAL finishContacts, Size #1/0, #4 and #8Pin contact and socket contactbody: high-conductivity copperalloy per ASTM B301Hermetic contact: ferrous alloy perASTM B 829Socket contact spring: berylliumcopperCode 1: Silver per ASTM-B700, 0.0002 –0.0003 thick over nickel plate per QQ-N-290class 2 .000050-.000100 thickCode 2: Gold per ASTM B488, Type II, Code C,Class 1.25, .000050-.000100 thick over nickelplate per QQ-N-290, Class 2, .000050-.000100thickBContacts, Size #12 and #16Contacts, Hermetic, Size #12and #16Aluminum Shells,Coupling NutsStainless Steel Shells, CouplingNuts, Hermetic Receptacle ShellsInsulatorsPin contact: copper alloySocket contact: copper alloy,stainless steel hoodPin contact: ferrous alloy per ASTMB 829Socket Contact: ferrous alloy pin,copper alloy socket, stainless steelhoodAluminum alloy 6061Stainless steel, AISI 316Fiberglass-reinforced thermosettingepoxy resin per ASTM-D-5948, TypeGEI-5, blackGold per ASTM B488, Type II, Code C,0.000015-0.000025 thick over palladiumper ASTM B679, 0.000060-0.000100 thick,over nickel per SAE AMS-QQ-N-290 Class 2,0.000050-0.000100 thickCode 1: Silver per ASTM-B700, 0.0002 –0.0003 thick over nickel plate per QQ-N-290class 2 .000050-.000100 thickCode 2: Gold per ASTM B488, Type II, Code C,Class 1.25, .000050-.000100 thick over nickelplate per QQ-N-290, Class 2, .000050-.000100thickSee Ordering InformationSee Ordering InformationNoneInsulator, Hermetic Vitreous glass NoneInterfacial Seals, Grommets Fluorosilicone/silicone blend, blue NoneEMI Spring Beryllium copper Nickel-platedContact Retention Clip Beryllium copper NoneClinch Nut Stainless Steel PassivatedAnti-Decoupling Ratchet Spring Stainless Steel NoneFilter ElementMultilayer ceramic planar array© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com9E-Mail: sales@glenair.com

TechnicalReferenceSeries 970 Connectors and AccessoriesTechnical ReferenceProduct SpecificationDESCRIPTION REQUIREMENT PROCEDUREAltitude ImmersionNo evidence of moisture on connector interface or contacts.At the end of the third cycle, while still submersed, connectorsshall meet 2000 Vac dielectric withstanding voltage and 1,000megohms insulation resistance.EIA-364-03Simulated 75,000 feet altitudeBAltitude- Low TemperatureBlowing Sand and DustContact Insertionand Removal Force(Maintenance Aging)Contact resistance(copper alloy)Contact resistance(ferrous alloy hermetic)Contact RetentionSalt Spraymaterial/finish code MEInsulation resistance greater than 5,000 megohms while matedand exposed to simulated 110,000 feet altitude and -65°C.Connectors shall meet electrical and mechanical requirementsfollowing exposure to sand and dust.Contact Size Max. Pounds16 2012 308 354 401/0 40Wire Size Test Current Voltage Drop16 13 4914 17 4012 23 428 46 264 80 231/0 150 21Wire Size Test Current Voltage Drop16 10 53914 13 44012 17 4628 33 2864 60 2531/0 100 231Contact SizeMin. Pounds16 2512 308 504 601/0 75No exposure of base metal. Connectors shall meet DWV,contact resistance, shell-to-shell resistance and coupling torqueEIA-364-105Mated pairMIL-STD-810G Method 510.5Mated connectorsEIA-364-24EIA-364-06Test current in amperes. Maximum voltagedrop in millivolts. Silver-coated copper wire,+25°C.EIA-364-06Test current in amperes. Maximum voltagedrop in millivolts. Silver-coated copper wire,+25°C.EIA-364-29 Method BEIA-364-2696 hourslenairDynamic Salt Spraymaterial/finish codes NF,ZR, MT, Z1No exposure of base metal. Connectors shall meet DWV,contact resistance, shell-to-shell resistance and coupling torqueMIL-DTL-38999 Para. 4.5.13.250 cycles of mating and unmating prior to test452 hours mated48 hours unmated450 cycles of mating and unmating followingsalt spray exposureCoupling TorqueCurrent RatingDielectric WithstandingVoltage at Sea Level(not applicable to filterconnectors)Shell Size Maximum (in-lb.)18 2820 3224 3628 4732 5336 6540 75Contact Size Copper Alloy Ferrous Alloy16 13 1012 23 178 46 334 80 601/0 150 125No breakdown or flashover at 2000 voltsEIA-364-70EIA-364-20AC rms 50-60 Hz2mA max. leakage current© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com10E-Mail: sales@glenair.com

Series 970 Connectors and AccessoriesTechnical ReferenceProduct SpecificationTechnicalReferenceDESCRIPTION REQUIREMENT PROCEDUREDielectric WithstandingVoltage at Sea Level, filterconnectorsNo breakdown or flashover at 1250 voltsEIA-364-20Volts DC2mA max. leakage currentFrequency Min. Atten.MHzdB100 90200 88300 88400 87EIA-364-66 1,000 MHz to 10,000 MHz.EMI Shielding800 85MIL-DTL-38999L Para. 4.5.28.1 100 MHz toEffectiveness1000 851,000 MHz1500 76Prior to EMI test, connectors shall be mated a2000 70minimum of 500 cycles.3000 694000 686000 6610000 65No evidence of damage.SHELL Bend MomentSIZE (in-lb.)18 420External Bend Moment2024450570SAE AS50151 Para. 4.6.2028 63032 75036 81040 870Fluid ImmersionNo visual evidence of degradation from immersion in variousfuels and oils. Following immersion connectors shall meet EIA-364-10coupling torque and dielectric withstanding voltage at sea level.Fungus Resistance Connector materials shall be fungus inert MIL-STD-810G Method 508.6High-Impact ShockHumidity, 21 Day (Dampheat, Long Term)Humidity, Cyclic (DampHeat, Cyclic) (MoistureResistance)Impact, Cable ConnectorsNo discontinuity, no cracking, breaking or loosening of parts.Connectors shall meet electrical requirements after shock test.No deterioration which will adversely affect the connector.Following the drying period, connectors shall meet 100megohms minimum, contact resistance, shell-to-shellresistance, DWV, mating and unmating requirements.No deterioration which will adversely affect the connector. 100megohms minimum insulation resistance during the final cycle.Following the recovery period, connectors shall meet contactresistance, shell-to-shell resistance and DWV requirements.No impairment of function. Connector shall meet contactresistance, insulation resistance and waterproof sealing.MIL-DTL-38999L Para. 4.5.23.2MIL-S-901, grade AEIA-364-31 Condition C Method II90-95% RH40° CApply 100 volts DC during test. 4 hours dryingtime at ambient temperature prior to finalmeasurements.EIA-364-31 Condition B Method III80-98% RH10 cycles (10 days)+25° C to +65° CStep 7b vibration deleted.24 hour recovery period.EIA-364-421 meter8 dropsIngress Protection IP67 rating IEC-60529SHELL FORCESIZE(lbs.)18 5020 75EIA-364-35Insert Retention24 85Unmated connectors28 105100 ± 5 pounds per square inch32 11536 13540 165Insulation Resistance atAmbient TemperatureInsulation Resistance atElevated Temperature5,000 megohms minimum1,000 megohms minimum following 30 minutes at +200°CEIA-364-21500 volts DC ± 50 volts.EIA-364-21500 volts DC ± 50 volts.B© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com11E-Mail: sales@glenair.com

TechnicalReferenceSeries 970 Connectors and AccessoriesTechnical ReferenceProduct SpecificationDESCRIPTION REQUIREMENT PROCEDUREBLow Level ContactWire SizeMax. MilliohmsEIA-364-23Resistance16 5100 milliamperes maximum and 20 millivolts20 9maximum open circuit voltageMagnetic Permeability 2 μ maximum. EIA-364-54Mechanical Durability, atAmbient TemperatureMechanical ShockOperating TemperatureOutgassingOzone ExposureResistance to IndirectLightening StrikeShell-To-ShellConductivitySocket ContactEngagement andSeparation ForceThermal ShockVibration, Random, atAmbient TemperatureVibration, Random, atElevated TemperatureVibration, SineWater ImmersionWater PressureOutgassingNo deterioration which will adversely affect the connectorafter 2000 cycles of mating and unmating. Connectors shallmeet contact resistance, insulation resistance, shell-to-shellresistance, DWV, and coupling torque.No discontinuity of greater than 1 microsecond, no cracking,breaking or loosening of parts, plug shall not becomedisengaged from receptacle. Connectors shall meet electricalrequirements after shock test.-650 C to +2000 CFilter Connectors -550 C to +1250 CConnectors, when specially processed for outgassing control,shall not exceed 1.0% Total Mass Loss (TML) and 0.1%Collected Volatile Condensable Material (CVCM)No evidence of degradation due to ozone exposure that willadversely affect performanceNo damage or degradation to material or finish that wouldaffect subsequent use, no damage or hardening of elastomericmaterials that adversely affects sealing effectiveness.Connector must meet coupling torque, DWV and IR and shellto-shellconductivity.Applicable to connectors with conductiveplating finishes.Finish Code ME 1 millivolt drop maximumFinish Code NF, MT 2.5 millivolt drop maximumFinish Code ZR 10 millivolt drop maximumFinish Code Z1 50 millivolt drop maximumContact engagement and separation forces shall meet therequirements of SAE AS39029 Table 9No mechanical damage or loosening of parts. Following thermalshock, connector shall meet contact resistance, DWV, insulationresistance and shell-to-shell resistance requirements.No discontinuity of greater than 1 microseconds, no cracking,breaking or loosening of parts, plug shall not becomedisengaged from receptacle. Connectors shall meet electricalrequirements after vibration test.No discontinuity of greater than 1 microseconds, no cracking,breaking or loosening of parts, plug shall not becomedisengaged from receptacle. Connectors shall meet electricalrequirements after vibration test.No discontinuity of greater than 1 microseconds, no cracking,breaking or loosening of parts, plug shall not becomedisengaged from receptacle. Connectors shall meet electricalrequirements after vibration test.No evidence of water penetration into mated connectors.No evidence of water penetration into mated connectors orbackshell interface. ≥ 100 MΩ insulation resistance.Special Bakeout Required1.0% Total Mass Loss (TML)0.1% Collected Volatile Condensable Material (CVCM)EIA-364-09EIA-364-27 Condition D3 shocks X 3 axes X 2 directions = 18 shocks2941 m/s 2 (300 g’s), 3 ms, half-sineASTM E 595EIA-364-14Wired, mated connectorsEIA/ECA-364-75 Table XII, group 1410,000 Amps peak currentTest details per MIL-DTL-38999 Para. 4.5.47EIA-364-83Unwired connectorsSAE AS39029EIA-364-32 Test Condition VI5 cycles consisting of -65° C 30 minutes,+25° C 5 minutes max., +200° C 30 minutes,+25° C 5 minutes max.MIL-DTL-38999 Para. 4.5.23.2.4EIA-364-28 Test Condition VI Letter “J”50- 2,000 Hz43.92 g rms200° CMIL-DTL-38999L Para. 4.5.23.2.1MIL-STD-810F Method 512.4,1 meterimmersion for 1 hourMIL-DTL- 28840 Paragraph 4.1.15.6 feet immersion in tap water, 48 hoursASTM E595© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com12E-Mail: sales@glenair.com

Series 970 Connectors and AccessoriesTechnical ReferenceMaterial and Finish OptionsTechnicalReferencematerial and finish options for Powertrip connectors and accessoriesPowertrip connector shells are made of aluminum alloy or stainless steel. These shells are plated to improve corrosionresistance and conductivity. Electroless nickel plating is used for instrumentation, avionics and space applicationswhere corrosion protection is not critical. Cadmium plating provides superior corrosion protection, but the United StatesDepartment of Defence (DOD)has mandated the elimination of cadmium from DOD weapons systems because of toxicityconcerns. The European Union has also restricted the use of cadmium on electronics equipment (RoHS). The top choicesfor cadmium replacement are Nickel-PTFE (MT) and Zinc-Nickel (ZR). In this catalog you will find four standard platings foralminum shells: Electroless Nickel, Nickel-PTFE, Black Zinc-Nickel, and Olive-Drab Cadmium. A fifth option is PassivatedStainless Steel for extremely hostile environments. Glenair also offers dozens of optional material and finish options, typicallywith no minimum orders or lengthy lead times. A selection of these optional finishes is shown in the table below.standard material & finish selection guideAlum/ Olive Drab Alum/ Black Zinc-Property Alum/ Nickel Alum/ Nickel-PTFE CadmiumNickelSST/ PassivateGlenair Code ME MT NF ZR Z1Corrosion Resistance Fair Excellent Excellent Excellent ExcellentTemperature Range -65°C to +200°C -65°C to +200°C -65°C to +175°C -65°C to +175°C -65°C to +200°CSalt Spray Hours 96 1000 (1) 1000 (1) 1000 (1) 2000Conductivity Excellent Excellent Good Good FairRelative Cost $$ $$$ $$ $$$ $$$$RoHS Compliant (2) Yes Yes No Yes Yes(1) Dynamic salt spray testing reduces 1000 hours to 500 hours. Dynamic testing includes 500 connector mating cycles.(2) Does not contain cadmium or hexavalent chromium. Meets EU requirements.BThe following table contains optional plating codes not shown in the ordering information. If one of these optionalfinishes is preferred over the above standard finishes, substitute the appropriate code in the part number.Code Material Finishoptional Material and Finish CodesFinish Hrs. Salt ElectricalSpecification Spray ConductivityOperatingTemp. RangeRoHSCompliance (2)AB Marine Bronze Unplated 1000 Conductive -65 to +200°C AL Aluminum AlumiPlate MIL-DTL-83488 1000 (1) Conductive -65 to +175°C C Aluminum Anodize, Black AMS-A-8625 48 Non-Conductive -65 to +175°C E Aluminum Chem Film MIL-DTL-5541 168 Conductive -65 to +175°CG2 Aluminum Anodize, Hardcoat AMS-A-8625 336 Non-Conductive -65 to +200°C JF Aluminum Cadmium, Gold SAE-AMS-QQ-P-416 1000 (1) Conductive -65 to +175°CM Aluminum Electroless Nickel AMS-C-26074 48 Conductive -65 to +200°C NC Aluminum Zinc-Cobalt, Olive Drab ASTM B 840 350 Conductive -65 to +175°CP Stainless Steel Electrodeposited Nickel SAE-AMS-QQ-N-290 500 Conductive -65 to +200°C Z1 Stainless Steel Passivate SAE-AMS-QQ-P-35 1000 Conductive -65 to +200°C Z2 Aluminum Gold MIL-DTL-45204 48 Conductive -65 to +200°C ZL Stainless Steel Electrodeposited Nickel SAE-AMS-QQ-N-290 1000 (1) Conductive -65 to +200°C ZM Stainless Steel Electroless Nickel AMS-C-26074 1000 Conductive -65 to +200°C ZMT Stainless Steel Nickel-PTFE GMF-002 1000 (1) Conductive -65 to +175°C ZN Aluminum Zinc-Nickel, Olive Drab ASTM B841 500 Conductive -65 to +175°CZNU Aluminum Zinc-Nickel, Black ASTM B841 500 Conductive -65 to +175°CZU Stainless Steel Cadmium, Black SAE-AMS-QQ-P-416 1000 Conductive -65 to +175°CZW Stainless Steel Cadmium, Olive Drab SAE-AMS-QQ-P-416 2000 Conductive -65 to +175°C(1) Dynamic salt spray testing reduces 1000 hours to 500 hours. Dynamic testing includes 500 connector mating cycles.(2) Does not contain cadmium or hexavalent chromium. Meets EU requirements.© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com13E-Mail: sales@glenair.com

TechnicalReferenceSeries 970 Connectors and AccessoriesTechnical ReferencePowerTrip Connectors for Space FlightBPowertrip connectors for space flight• Standard connectorsmust be baked outto meet outgassingrequirements.• Modification codesare a convenient wayto specify specialoutgassing bakeout.• Cadmium and silverplating are prohibitedin space.• Specify electroless nickelplating on connectorshells and gold platingon contacts.• “Mission critical”connectors for spaceflight should undergorigorous 100% finalinspection.• Modification codesare available to invokespecial screening.OUTGASSINGSpace flight equipment requires low-outgassing components in order to preventdegradation to optics and other sensitive instruments. The space industry has adopteda standardized test procedure, ASTM E595, to evaulate outgassing properties. In theASTM test, material samples are heated to 1250 C at a vacuum of 5 X 10 -5 torr for 24hours. The test sample is then weighed to calculate the Total Mass Loss (TML), whichmay not exceed 1.0% of the total initial mass. A collector plate is used to determinethe Collected Volatile Condensable Material (CVCM), which may not exceed 0.1% ofthe total original specimen mass. Powertrip connectors contain nonmetallic materialssuch as rubber, plastic, adhesives and potting compounds which can give off gasseswhen subjected to a vacuum or high heat. Unless the connector is specially processed,the TML and CVCM can exceed allowable limits. Glenair is able to offer two bakeoutprocesses which assure all materials comply with ASTM E595: an 8 hour oven bakeoutat 4000 F or a 24 hour thermal vacuum outgassing at 1250 C. The table below showssuffix codes which specify outgassing processing.connectoR MATERIAL AND FINISH optionsSome types of metals are prohibited for space flight. “Cadmium, zinc, chemically coatedcadmium or zinc, or silver shall not be used as a connector or contact finish” (NASA EEE-INST-002 Instructions for EEE Parts Selection, Screening, Qualification, and Derating).NASA recommends electroless nickel or gold plating on connector shells and goldplating for contacts.nasa screeningNASA recommends that connectors for space flight be specially screened. NASA EEE-INST-002 Instructions for EEE Parts Selection, Screening, Qualification, and Deratingcontains three levels of screening: level 1 for highest reliabity, level 2 for high reliabilityand level 3 for standard reliability. Glenair suffix codes are available to invoke NASAscreening. The table below shows these “Mod” codes which can also include outgassingprocessing.nasa screening levels and modification codesSpecial Screening Plus OutgassingProcessingNASA ScreeningLevelLevel 1 HighestReliabilityLevel 2 HighReliabilityLevel 3 StandardReliabilitySpecial ScreeningOnly8 Hour Oven Bake400° F.Thermal VacuumOutgassing24 hrs. 125° C.Mod 429B Mod 429J Mod 429CMod 429 Mod 429K Mod 429A(Use standard partnumber)Mod 186Mod 186M© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com14E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesCable Connectors970-001 PlugsCable Connectorsplug connectorsSeries 970 PowerTrip plug connectors feature high ampacity LouverBand contacts andrugged water resistant construction for the most demanding environments. Couplingthreads are triple-start ACME type. EMI protected with ground spring and splinedbackshell interface. Anti-decoupling ratchet prevents de-mating under vibration.Standard contacts are silver plated high conductivity copper alloy, or choose goldplatedcontacts for improved corrosion protection. Fluorosilicone rubber gaskets andgrommets provide watertight sealing. Contacts are packaged with connector.• EMI Protected• High Ampacity Contacts• Splined Backshell Interface• Ratchet Self-Lockingproduct facts2000 VAC Sea Level DWV Rating-65°C to +200°C Operating Temperature6 Feet Water Immersion, 48 Hours65 dB min. Attenuation, up to 10GHz2000 Cycles Mating DurabilityMIL-S 901 Grade A High-Impact Shock43 g Random VibrationBCSeries970-001Plug ConnectorSHELL MATERIALand FinishMEAluminum, ElectrolessNickel FinishMTAluminum, Nickel-PTFE FinishNFAluminum, Olive DrabCadmiumZRAluminum, Black Zinc-Nickel FinishZ1Passivated StainlessSteelContactArr.How To OrderSHELL Size - InsertArrangementContact Size and Qty#16 #12 #8 #4 #1/018-2 218-4 2 220-3 320-4 420-5 2 320-7 4 324-2 224-3 324-5 524-6 4 224-A6 3 328-4 428-9 5 432-2 232-3 332-4 2 232-5 532-6 3 336-4 440-5 5CoNTACT TYPE ANDPLATINGP1Pin Contacts, SilverPlating*P2Pin Contacts, Gold PlatingS1Socket Contacts, SilverPlating*S2Socket Contacts, GoldPlatingAPin Connector, withoutContactsBSocket Connector, withoutContacts* Size 12 and 16 contactsare gold-plated. Size 8, 4and 1/0 are silver plated.KEYPosition-1Position 1-2Position 2-3Position 3-4Position 4-5Position 5-6Position 6Sample Part Number970-001 MT 18- 2 P2 -1© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com15E-Mail: sales@glenair.com

Cable ConnectorsSeries 970 PowerTrip Connectors and AccessoriesCable Connectors970-001 Plugs970-001 Plug Connector2.063 (52.40)CØ ABMATING THDCACCESSORY THDDimensionsShell ø ABCSize In. mm. Mating Thread Accessory Thread18 1.485 37.72 1.125-0.1P-.3L-TS-2B 1.125-18 UNEF-2A20 1.583 40.21 1.250-0.1P-.3L-TS-2B 1.250-18 UNEF-2A24 1.875 47.63 1.500-0.1P-.3L-TS-2B 1.4375-18 UNEF-2A28 2.186 55.52 1.750-0.1P-.3L-TS-2B 1.8125-16 UN-2A32 2.420 61.47 2.000-0.1P-.3L-TS-2B 2.0625-16 UNS-2A36 2.709 68.81 2.250-0.1P-.3L-TS-2B 2.250-16 UN-2A40 2.980 75.69 2.500-0.1P-.3L-TS-2B 2.500-16 UN-2AKEY POSITIONSMASTER KEYA°B°C°D°Position A0 B0 C0 D01 80 142 196 2932 135 170 200 3103 49 169 200 2444 66 140 200 2575 62 145 180 2806 79 153 197 272© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com16E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesCable Connectors970-005 Cable ReceptacleCable Connectors970-005 Cable ReceptaclesSeries970-005CableReceptacleSHELL MATLand FinishMEAluminum,Electroless NickelFinishMTAluminum, Nickel-PTFE FinishNFAluminum, OliveDrab CadmiumZRAluminum, BlackZinc-Nickel FinishZ1PassivatedStainless SteelThese connectors, often called “in-line”, “line” or “free-hanging” receptacles, are installedon cables for cord-to-cord applications. These connectors feature high ampacityLouverBand contacts. Coupling threads are triple-start ACME type. EMI protected withground spring and splined backshell interface. Standard contacts are silver platedhigh conductivity copper alloy, or choose gold-plated contacts for improved corrosionprotection. Fluorosilicone rubber gaskets and grommets provide watertight sealing.Unassembled contacts are packaged with connector.• EMI Protected• High Ampacity Contacts• Splined Backshell InterfaceContactArr.How To OrderSHELL Size - InsertArrangementContact Size and Qty#16 #12 #8 #4 #1/018-2 218-4 2 220-3 320-4 420-5 2 320-7 4 324-2 224-3 324-5 524-6 4 224-A6 3 328-4 428-9 5 432-2 232-3 332-4 2 232-5 532-6 3 336-4 440-5 5product facts2000 VAC Sea Level DWV Rating-65°C to +200°C Operating Temperature6 Feet Water Immersion, 48 Hours65 dB min. Attenuation, up to 10GHz2000 Cycles Mating DurabilityMIL-S 901 Grade A High-Impact Shock43 g Random VibrationCoNTACT TYPE ANDPLATINGP1Pin Contacts, Silver Plating*P2Pin Contacts, Gold PlatingS1Socket Contacts, SilverPlating*S2Socket Contacts, GoldPlatingAPin Connector, withoutContactsBSocket Connector, withoutContacts* Size 12 and 16 contacts aregold-plated. Size 8, 4 and1/0 are silver plated.KEY PoSITIon-1Position 1-2Position 2-3Position 3-4Position 4-5Position 5-6Position 6Sample Part Number970-005 MT 24-5 P1 -1BC© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com17E-Mail: sales@glenair.com

Cable ConnectorsSeries 970 PowerTrip Connectors and AccessoriesCable Connectors970-005 Cable Receptacle970-005 Cable Receptacle ConnectorB°A°MASTER KEYRED MASTER KEYLOCATION STRIPEC°D°CD1.002/.972(25.45/24.69)2.070(52.58)MAX.130/.100(3.30/2.54)KEY POSITIONSPosition A0 B0 C0 D01 80 142 196 2932 135 170 200 3103 49 169 200 2444 66 140 200 2575 62 145 180 2806 79 153 197 272ØCAMATING THREADRED FULL MATEINDICATOR STRIPEBACCESSORY THREADDimensionsShellSizeAMating ThreadBAccessory ThdIn.±.010mm.±0.25In.±.005mm.±0.1318 1.125-.1P-.3L-TS-2A 1.125-18 UNEF-2A 1.328 33.73 1.138 28.9120 1.250-.1P-.3L-TS-2A 1.250-18 UNEF-2A 1.515 38.48 1.325 33.6624 1.500-.1P-.3L-TS-2A 1.4375-18 UNEF-2A 1.703 43.26 1.513 38.4328 1.750-.1P-.3L-TS-2A 1.8125-16 UN-2A 2.078 52.02 1.888 47.9632 2.000-.1P-.3L-TS-2A 2.0625-16 UNS-2A 2.265 57.53 2.075 52.7136 2.250-.1P-.3L-TS-2A 2.250-16 UN-2A 2.515 63.89 2.325 55.0640 2.500-.1P-.3L-TS-2A 2.500-16 UN-2A 2.765 70.23 2.575 65.41CD© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com18E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesCable ConnectorsTurboFlex CordsetsCable ConnectorsTurboFlex Cordsetsproduct factsConductors:• Annealed stranded copper,nickel or silver coated• High strandcount constructionfor excellent flexibility• 12 through 1/0 AWGInsulation:• Duralectric rubber• 2000 volt ratingCable jacket:• Duralectric rubber• 2000 volt rating• -650 to +260C0Overmold Compound:• Duralectric rubber• 2000 volt ratingFeatures:• Excellent cold temperatureflexibility• 2000 volt rating• Good abrasion resistance• Excellent resistance to fuels andsolvents• Halogen free• Flame retardant• Water resistant• Fugus resistant• Excellent resistance to sunlight(UV) and ozone• Fully shielded for EMI/RFIprotectionSave cost and reduce leadtimes with Glenair-made Powertrip cordsets. Ultra-flexibleovermolded power cords feature Glenair’s high performance Duralectric rubber.Originally developed for US Navy conduit applications, flame retardant Duralectricelastomer has excellent cold temperature flexibility and outstanding resistance to solarradiation, solvents and fuels. Low smoke, zero halogen (LSZH) material. Glenair TurboFlexwires feature high strandcount copper and extruded Duralectric insulation. Outer jacketand overmold are Duralectric material.Duralectric Test Data and SpecificationsTemperature Rating: -60°C to 260°C (with excursions to 290°C) Per MIL-PRF-24758A.Halogen free per IEC 60614-1. Less than 5mg of HCl per 1 gram of product used.Accelerated weathering (solar) per IEC 60068-2-5; 56 days exposure (equivalent to 50 years in the sun.)Flame resistant per IEC 60614-1; material does not sustain combustion when the source of flame isremoved.Low smoke index per NES 711 (11.75); minimum standard is 25. Tested level is 11.75.Smoke density class F1 per NF F 16-101 in accordance with DIN EN 60695-2-11:2001.Toxicity index per NES 713 (1.9); minimum standard is 5. Tested level is 1.9.Oxygen limiting index: 45.1 per EN ISO 4589-2:1999; minimum is 28.12 second vertical burn: (pass) per 14CFR part 25.853 (a) AMDT25-116 APP F part 1 (a) (1) (ii)Fluids per MIL-STD-810F, method 504FuelMIL-T-83133: JPGHydraulic fluid MIL-H-5606: Royco 756Lubricating oil MOL-L-23699: Royco -500Cleaner MIL-C-85570: calla -855SolventIsopropyl Alcohol: TT-I-735De-IcerAMS-1432: E36 runway de-icerCoolantMIL-C-87252: Coolanol 25RFire extinguishing foam: Amerex AFFFASTME E 595 vacuum outgassing–post bake results: TML .06%, CVCM .006%, WVR .02%Fungus resistance testing (rating of 0) per MIL-STD-810F, method 508.5ASTM D624 DIE B tear test: 150 KN/MHow to orderPlease consult the Glenair factory or your local Glenair sales officeBC© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com19E-Mail: sales@glenair.com

ReceptacleConnectorsSeries 970 PowerTrip Connectors and AccessoriesReceptacle Connectors970-003 Square Flange Receptacle970-003 Square Flange ReceptaclesSeries 970 PowerTrip extreme environment receptacle connectors are intended forhigh current applications where size 8 AWG to size 1/0 AWG wires are used. Theseconnectors feature high ampacity LouverBand contacts. Coupling threads are triple-startACME type. EMI protected with ground spring on mating plug and splined backshellinterface. Standard contacts are silver plated high conductivity copper alloy, or choosegold-plated contacts for improved corr osion protection. Fluorosilicone rubber gasketsand grommet provide watertight sealing. Contacts are packaged with connector.DSeries970-003Square FlangePanel MountReceptacle withCrimp ContactsSHELL MATLand FinishMEAluminum,ElectrolessNickel FinishMTAluminum,Nickel-PTFEFinishNFAluminum,Olive DrabCadmiumZRAluminum,Black Zinc-Nickel FinishZ1PassivatedStainless SteelContactArr.• EMI Protected• High Ampacity Contacts• Submersible• Harsh EnvironmentHow To OrderSHELL Size - Insert CoNTACT TypeArrangement and PLATINGContact Size and Qty#16 #12 #8 #4 #1/018-2 218-4 2 220-3 320-4 420-5 2 320-7 4 324-2 224-3 324-5 524-6 4 224-A6 3 328-4 428-9 5 432-2 232-3 332-4 2 232-5 532-6 3 336-4 440-5 5P1Pin Contacts, SilverPlating*P2Pin Contacts, GoldPlatingS1Socket Contacts,Silver Plating*S2Socket Contacts,Gold PlatingAPin Connector,without ContactsBSocket Connector,without Contacts* Size 12 and 16contacts are goldplated.Size 8, 4 and1/0 are silver plated.product facts2000 VAC Sea Level DWV Rating-65°C to +200°C Operating Temperature6 Feet Water Immersion, 48 Hours65 dB min. Attenuation, up to 10GHz2000 Cycles Mating DurabilityMIL-S 901 Grade A High-Impact Shock43 g Random VibrationMountingHole OptionNThru-HoleTClinch NutsInstalled inMounting Holesfor Back PanelMounting.KEYPoSITIon-1Position 1-2Position 2-3Position 3-4Position 4-5Position 5-6Position 6Sample Part Number970-003 MT 24-5 P1 N -1© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com20E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesReceptacle Connectors970-003 Square Flange ReceptacleReceptacleConnectors970-003 Square Flange ReceptacleRED MASTER KEYLOCATION STRIPE1.002/.972(25.45/24.69)2.070(52.58)MAX.130/.100(3.30/2.54)BMOUNTING HOLE OPTION TCLINCH NUT, 4 PLCS,SELF-LOCKING, STAINLESSSTEELATYPDTYPFMOUNTINGHOLECUTOUTDØ EBMATING THREADRED FULL MATEINDICATOR STRIPECACCESSORY THREAD.250 (6.35) MAXIMUMMOUNTING PANELTHICKNESSDimensionsShell ABCD ø E Eø FSize In. mm. Mating Thread Accessory Thd In. mm. In. mm. Clinch Nut Thd In. mm.18 1.383 35.13 1.125-.1P-.3L-TS-2A 1.125-18 UNEF-2A 1.015 25.78 .146 3.71 6-32 UNC-2B 1.187 30.1520 1.508 38.30 1.250-.1P-.3L-TS-2A 1.250-18 UNEF-2A 1.140 28.96 .146 3.71 6-32 UNC-2B 1.374 34.9024 1.718 43.64 1.500-.1P-.3L-TS-2A 1.4375-18 UNEF-2A 1.281 32.54 .146 3.71 6-32 UNC-2B 1.562 39.6728 2.138 54.31 1.750-.1P-.3L-TS-2A 1.8125-16 UN-2A 1.568 39.83 .170 4.32 8-32 UNC-2B 1.835 46.6132 2.328 59.13 2.000-.1P-.3L-TS-2A 2.0625-16 UNS-2A 1.734 44.04 .170 4.32 8-32 UNC-2B 2.093 53.1636 2.578 65.48 2.250-.1P-.3L-TS-2A 2.250-16 UN-2A 1.984 50.39 .170 4.32 8-32 UNC-2B 2.302 58.4740 2.828 71.83 2.500-.1P-.3L-TS-2A 2.500-16 UN-2A 2.234 56.74 .170 4.32 8-32 UNC-2B 2.562 65.07C°D°B°A°MASTER KEYKEY POSITIONSPosition A0 B0 C0 D01 80 142 196 2932 135 170 200 3103 49 169 200 2444 66 140 200 2575 62 145 180 2806 79 153 197 272© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com21E-Mail: sales@glenair.com

ReceptacleConnectorsSeries 970 PowerTrip Connectors and AccessoriesReceptacle Connectors970-009 Low Profile Square Flange Receptacle970-009 Low Profile square flange Receptacles970-009 receptacles have a shorter profile than standard square flange receptacles.This reduced protrusion behind the mounting panel results from removing theaccessory threads, moving the mounting flange and replacing the grommet wire sealwith a thinner wire separator. Series 970 PowerTrip extreme environment receptacleconnectors are intended for high current applications where size 8 AWG to size 1/0AWG wires are used. These connectors feature high ampacity LouverBand contacts.Coupling threads are triple-start ACME type. EMI protected with ground spring andsplined backshell interface. Standard contacts are silver plated high conductivity copperalloy, or choose gold-plated contacts for improved corrosion protection. Contacts arepackaged with connector. Red stripe indicates full mating condition when the plugconnector coupling ring fully covers the stripe.970-009 connectors have a low profile wire separator instead of a thick watertightrear grommet. These connectors are splashproof but are not rated for waterimmersion or altitude immersion.DSeries970-009Low ProfileSquare FlangePanel MountReceptacle withCrimp ContactsSHELL MATLand FinishMEAluminum,ElectrolessNickel FinishMTAluminum,Nickel-PTFEFinishNFAluminum,Olive DrabCadmiumZRAluminum,Black Zinc-Nickel FinishZ1PassivatedStainless SteelContactArr.How To OrderSHELL Size - Insert CoNTACT TypeArrangement and PLATINGContact Size and Qty#16 #12 #8 #4 #1/018-2 218-4 2 220-3 320-4 420-5 2 320-7 4 324-2 224-3 324-5 524-6 4 224-A6 3 328-4 428-9 5 432-2 232-3 332-4 2 232-5 532-6 3 336-4 440-5 5P1Pin Contacts, SilverPlating*P2Pin Contacts, GoldPlatingS1Socket Contacts,Silver Plating*S2Socket Contacts,Gold PlatingAPin Connector,without ContactsBSocket Connector,without Contacts* Size 12 and 16contacts are goldplated.Size 8, 4 and1/0 are silver plated.MountingHole OptionNThru-HoleTClinch NutsInstalled inMounting Holesfor Back PanelMounting.KEYPoSITIon-1Position 1-2Position 2-3Position 3-4Position 4-5Position 5-6Position 6Sample Part Number970-009 MT 24-5 P1 N -1© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com22E-Mail: sales@glenair.com

ReceptacleConnectorsSeries 970 PowerTrip Connectors and AccessoriesReceptacle Connectors970-013 Low Profile Square Flange Receptacle970-013 Low Profile Receptacle with O-ring970-013 receptacles feature an O-ring for panel sealing. Low profile for reducedclearance inside equipment. Connector mounting flange is enlarged to include theO-ring. Series 970 PowerTrip extreme environment receptacle connectors are intendedfor high current applications where size 8 AWG to size 1/0 AWG wires are used. Contactssnap into connector and can be removed with a plastic tool. These connectors featurehigh ampacity LouverBand contacts. Coupling threads are triple-start ACME type. EMIprotected with ground spring and splined backshell interface. Standard contacts aresilver plated high conductivity copper alloy, or choose gold-plated contacts for improvedcorrosion protection. Contacts are packaged with connector. Red stripe indicates fullmating condition when the plug connector coupling ring fully covers the stripe.970-013 connectors have a low profile wire separator instead of a thicker watertightrear grommet. These connectors are splashproof but are not rated for waterimmersion or altitude immersion.DSeries970-013Low ProfileSquare FlangePanel MountReceptacle withO-ring PanelSealSHELL MATLand FinishMEAluminum,ElectrolessNickel FinishMTAluminum,Nickel-PTFEFinishNFAluminum,Olive DrabCadmiumZRAluminum,Black Zinc-Nickel FinishZ1PassivatedStainless SteelContactArr.How To OrderSHELL Size - InsertArrangementContact Size and Qty#16 #12 #8 #4 #1/018-2 218-4 2 220-3 320-4 420-5 2 320-7 4 324-2 224-3 324-5 524-6 4 224-A6 3 328-4 428-9 5 432-2 232-3 332-4 2 232-5 532-6 3 336-4 440-5 5CoNTACT Typeand PLATINGP1Pin Contacts, SilverPlating*P2Pin Contacts, GoldPlatingS1Socket Contacts, SilverPlating*S2Socket Contacts, GoldPlatingAPin Connector, withoutContactsBSocket Connector,without Contacts* Size 12 and 16 contactsare gold-plated. Size 8, 4and 1/0 are silver plated.MountingHoLE oPTIonNThru-HoleTClinch NutsInstalled inMounting Holesfor Back PanelMounting.KeyPos.-1Position1-2Position2-3Position3-4Position4-5Position5-6Position6Sample Part Number970-013 MT 24-5 P1 N -1© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com24E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesReceptacle Connectors970-013 Low Profile Square Flange ReceptacleReceptacleConnectors970-013 Low Profile ReceptacleRED MASTER KEYLOCATION STRIPEPOLARIZATIONNUMBER(LOCATIONOPTIONAL)1.860(47.24)MAX1.240/1.210(31.50/30.73).160/.130(4.06/3.30)B1MOUNTING HOLE OPTION TCLINCH NUT, 4 PLCS,SELF-LOCKING, STAINLESSSTEELATYPDTYPBAFMOUNTINGHOLECUTOUTØ CDØ EBMATING THREADRED FULL MATEINDICATOR STRIPE.47 (11.9) MAXIMUMMOUNTING PANELTHICKNESSDimensionsShell ABC D ø E Eø FSize In. mm. Mating Thread In. mm. In. mm. In. mm. Clinch Nut Thd In. mm.18 1.591 40.41 1.125-.1P-.3L-TS-2A .972 24.69 1.275 32.39 .146 3.71 6-32 UNC-2B 1.187 30.1520 1.779 45.19 1.250-.1P-.3L-TS-2A 1.116 28.35 1.408 35.76 .146 3.71 6-32 UNC-2B 1.374 34.9024 2.029 51.54 1.500-.1P-.3L-TS-2A 1.300 33.02 1.585 40.26 .146 3.71 6-32 UNC-2B 1.562 39.6728 2.404 61.06 1.750-.1P-.3L-TS-2A 1.604 40.74 1.905 48.39 .170 4.32 8-32 UNC-2B 1.835 46.6132 2.529 64.24 2.000-.1P-.3L-TS-2A 1.875 47.63 1.993 50.62 .170 4.32 8-32 UNC-2B 2.093 53.1636 2.654 67.41 2.250-.1P-.3L-TS-2A 2.093 53.16 2.081 52.86 .170 4.32 8-32 UNC-2B 2.302 58.4740 3.029 76.94 2.500-.1P-.3L-TS-2A 2.310 58.67 2.347 59.61 .170 4.32 8-32 UNC-2B 2.562 65.07C°D°B°A°MASTER KEYKEY POSITIONSPosition A0 B0 C0 D01 80 142 196 2932 135 170 200 3103 49 169 200 2444 66 140 200 2575 62 145 180 2806 79 153 197 272© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com25E-Mail: sales@glenair.com

ReceptacleConnectorsSeries 970 PowerTrip Connectors and AccessoriesReceptacle Connectors970-008 PC Tail Receptacles970-008 Receptacles with Size #8 PC TailsSeries 970 PowerTrip receptacles with size #8 PC tail contacts for direct termination tocircuit boards. Contacts are factory-installed and are non-removable. These connectorsfeature high ampacity LouverBand contacts. Coupling threads are triple-start ACMEtype. EMI protected with ground spring and splined backshell interface. Standardcontacts are silver plated high conductivity copper alloy, or choose gold-plated contactsfor improved corrosion protection. Fluorosilicone rubber gaskets and epoxy pottingprovide watertight sealing. Connector shell has integral standoffs.• EMI Protected• High Ampacity Contacts• PC Board terminals• Harsh Environmentproduct facts2000 VAC Sea Level DWV Rating-65°C to +200°C Operating Temperature6 Feet Water Immersion, 48 Hours65 dB min. Attenuation, up to 10GHz2000 Cycles Mating DurabilityMIL-S 901 Grade A High-Impact Shock43 g Random VibrationDSeries970-008Low ProfileSquareFlangePanel MountReceptaclewith PrintedCircuitTerminalsSHELL MATLand FinishMEAluminum,ElectrolessNickel FinishMTAluminum,Nickel-PTFEFinishNFAluminum,Olive DrabCadmiumZRAluminum,Black Zinc-Nickel FinishZ1PassivatedStainless SteelSHELL Size - InsertArrangement18-22#818-42#8, 2 #1220-33 #820-44#820-53#8, 2 #1220-73#8, 4 #16FEGBDCDCDEHow To OrderAAAACDABBABCBBCCoNTACT Typeand PLATINGP1Pin Contacts, SilverPlating*P2Pin Contacts, GoldPlatingS1Socket Contacts,Silver Plating*S2Socket Contacts,Gold Plating* Size 12 and 16contacts aregold-plated. Size8, 4 and 1/0 aresilver plated.PC TailLengthA.125 (3.18)B.250 (6.35)C.375 (9.53)MountingHole OptionNThru-HoleTClinch NutsInstalled inMounting Holesfor Back PanelMounting.KEYPos.-1Position 1-2Position 2-3Position 3-4Position 4-5Position 5-6Position 624-55 #8DEABCSample Part Number970-008 MT 24-5 P2 A N -1© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com26E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesReceptacle Connectors970-008 PC Tail ReceptaclesReceptacleConnectors970-008 PC Tail Receptacle4 X .045 (1.14)STANDOFFSBATYPCTYP1.002/.972(25.45/24.69)1.560(39.62).130/.100(3.30/2.54)MOUNTING HOLE OPTION T#6-32 UNC-2B CLINCH NUT, 4PLCS, SELF-LOCKING,STAINLESS STEELDMOUNTINGHOLECUTOUTPC TAIL LENGTH ± .015 (0.38)A = .125 (3.18)B = .250 (6.35)C = .375 (9.53)DØ .146 (3.71)± .005 (0.13)4 PLACESBMATING THREADRED FULL MATEINDICATOR STRIPE.250 (6.35) MAXIMUMMOUNTING PANELTHICKNESSPC TAIL DIA. ± .002 (0.05)SIZE 16: .0625 (1.59)SIZE 12: .094 (2.39)SIZE 8: .142 (3.61)DimensionsShell ABCø DSize In. mm. Mating Thread In. mm. In. mm.18 1.383 35.13 1.125-.1P-.3L-TS-2A 1.015 25.78 1.187 30.1520 1.508 38.30 1.250-.1P-.3L-TS-2A 1.140 28.96 1.374 34.9024 1.718 43.64 1.500-.1P-.3L-TS-2A 1.281 32.54 1.562 39.67C°D°B°A°MASTER KEYKEY POSITIONSPosition A0 B0 C0 D01 80 142 196 2932 135 170 200 3103 49 169 200 2444 66 140 200 2575 62 145 180 2806 79 153 197 272© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com27E-Mail: sales@glenair.com

ReceptacleConnectorsSeries 970 PowerTrip Connectors and AccessoriesReceptacle Connectors970-008 PC Tail ReceptaclesContactArrangement970-008 PRINTED CIRCUIT BOARD PATTERNSComponent Mounting Side of PCB2X .185 (4.70)2X .185 (4.70)B18-22#8 ContactsABAHOLE TOACCEPT .144(3.66) MAXDIACONTACT 2XABHOLE TOACCEPT .144(3.66) MAXDIACONTACT 2X18-2P Pin Connector18-2S Socket Connector2X .185 (4.70)2X .185 (4.70)DD18-42#8 Contacts,2 #12 ContactsACB2X .250(6.35)DACBHOLE TOACCEPT .096(2.44) MAXDIA CONTACT2XHOLE TOACCEPT .144(3.66) MAXDIA CONTACT2X2X .250(6.35)BACDHOLE TOACCEPT .096(2.44) MAXDIA CONTACT2XHOLE TOACCEPT .144(3.66) MAXDIA CONTACT2X18-4P Pin Connector18-4S Socket Connector2X .195 (4.95)2X .195 (4.95)A.225(5.72)A.225(5.72)ACB20-33#8 ContactsHOLE TO ACCEPT.144 (3.66) MAX DIACONTACT 3XCB.113(2.87)HOLE TO ACCEPT.144 (3.66) MAX DIACONTACT 3XBC.113(2.87)20-3P Pin Connector20-3S Socket Connector2X .183 (4.65)2X .183 (4.65)DCAB2X .183(4.65)DA2X .183(4.65)AD20-44#8 ContactsHOLE TO ACCEPT.144 (3.66) MAXDIA CONTACT 4XCBHOLE TO ACCEPT.144 (3.66) MAXDIA CONTACT 4XBC20-4P Pin Connector20-4S Socket Connector© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com28E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesReceptacle Connectors970-008 PC Tail ReceptaclesReceptacleConnectorsContactArrangement970-008 PRINTED CIRCUIT BOARD PATTERNSComponent Mounting Side of PCBEDACB2X .150(3.81)EA2X .285 (7.24)B.250(6.35)HOLE TOACCEPT .096(2.44) MAX DIACONTACT 2X2X .150(3.81)BA2X .285 (7.24)E.250(6.35)HOLE TOACCEPT .096(2.44) MAX DIACONTACT 2XB20-53#8 Contacts,2 #12 Contacts2X.175(4.45)2X .180 (4.57)DCHOLE TOACCEPT .144(3.66) MAX DIACONTACT 3X2X.175(4.45)2X .180 (4.57)CDHOLE TOACCEPT .144(3.66) MAX DIACONTACT 3X20-5P Pin Connector20-5S Socket ConnectorFGEA20-73#8 Contacts,4 #16 ContactsDBC2X .268 (6.81)2X .210(5.33)2X .045(1.14)AGFEBCDHOLE TO ACCEPT.144 (3.66) MAX DIACONTACT 3XHOLE TO ACCEPT.065(1.65) MAX DIACONTACT 4X.250(6.35)2X.175(4.45)2X .268 (6.81)2X .210(5.33)2X .045(1.14)ABCDGEFHOLE TO ACCEPT.144 (3.66) MAX DIACONTACT 3XHOLE TO ACCEPT.065(1.65) MAX DIACONTACT 4X.250(6.35)2X.175(4.45)D2X .180 (4.57) 2X .337(8.56)20-7P Pin Connector2X .180 (4.57) 2X .337(8.56)20-7S Socket ConnectorDEAB2X .191 (4.85)2X .263(6.68)EAHOLE TOACCEPT .144(3.66) MAXDIA CONTACT5X2X .191 (4.85)2X .263(6.68)AEHOLE TOACCEPT .144(3.66) MAXDIA CONTACT5X24-55#8 ContactsC.325(8.26)DCB2X .100(2.54).325(8.26)BCD2X .100(2.54)2X .309 (7.85))2X .309 (7.85))24-5P Pin Connector24-5S Socket Connector© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com29E-Mail: sales@glenair.com

ReceptacleConnectorsSeries 970 PowerTrip Connectors and AccessoriesReceptacle Connectors970-012 HermeticD970-012 Hermetic ReceptaclesSeries970-012HermeticSquare FlangePanel MountReceptacleSHELL MATLand FinishZ1PassivatedStainless SteelZLElectrodepositedNickel finishover StainlessSteelSeries 970 PowerTrip hermetic receptacles feature 316L stainless steel shells andcompression glass insulators. Solder cup contacts are nickel-iron alloy and are nonremovable.Coupling threads are triple-start ACME type. Contacts are silver plated highconductivity copper alloy, or choose gold-plated contacts. Fluorosilicone rubber faceseal on pin connector. Stainless steel shells are passivated, or choose nickel plating forimproved shell-to-shell conductivity and EMI protection. Hermeticity is 1 X 10 -7 cc/secmaximum helium leak rate with one atmosphere pressure differential.ContactArr.• Compression Glass Seal• 1 X 10 -7 cc/sec He leak rate• Both Pin and SocketVersions• Stainless Steel ShellHow To OrderSHELL Size - Insert CoNTACT TypeArrangement and PLATINGContact Size and Qty#16 #12 #8 #4 #1/018-2 218-4 2 220-3 320-4 420-5 2 320-7 4 324-2 224-3 324-5 524-6 4 224-A6 3 328-4 428-9 5 432-2 232-3 332-4 2 232-5 532-6 3 336-4 440-5 5P1Pin Contacts, SilverPlatingP2Pin Contacts, GoldPlatingS1Socket Contacts,Silver Plating*S2Socket Contacts,Gold Platingproduct facts2000 VAC Sea Level DWV Rating-65°C to +200°C Operating Temperature6 Feet Water Immersion, 48 Hours65 dB min. Attenuation, up to 10GHz2000 Cycles Mating DurabilityMIL-S 901 Grade A High-Impact Shock43 g Random VibrationMountingHole OptionNThru-HoleKEYPoSITIon-1Position 1-2Position 2-3Position 3-4Position 4-5Position 5-6Position 6Sample Part Number970-012 Z1 20-4 P1 N -1© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com30E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesReceptacle Connectors970-012 HermeticReceptacleConnectors970-012 Hermetic ReceptacleRED MASTER KEYLOCATION STRIPE1.860(47.24)MAX1.240/1.210(31.50/30.73).130/.100(3.30/2.54)BATYPDTYPBAFMOUNTINGHOLECUTOUTØ CDØ E± .005 (0.13)BMATING THREADRED FULL MATEINDICATOR STRIPEO-RING.405 (10.29) MAX.47 (11.9) MAXIMUMMOUNTING PANELTHICKNESSDimensionsShell ABC D ø E ø FSize In. mm. Mating Thread In. mm. In. mm. In. mm. In. mm.18 1.383 35.13 1.125-.1P-.3L-TS-2A .972 24.69 1.015 25.78 .146 3.71 1.187 30.1520 1.508 38.30 1.250-.1P-.3L-TS-2A 1.116 28.35 1.140 28.96 .146 3.71 1.374 34.9024 1.718 43.64 1.500-.1P-.3L-TS-2A 1.300 33.02 1.281 32.54 .146 3.71 1.562 39.6728 2.138 54.31 1.750-.1P-.3L-TS-2A 1.604 40.74 1.568 39.83 .170 4.32 1.874 47.6032 2.328 59.13 2.000-.1P-.3L-TS-2A 1.875 47.63 1.734 44.04 .170 4.32 2.062 52.3736 2.578 65.48 2.250-.1P-.3L-TS-2A 2.093 53.16 1.984 50.39 .170 4.32 2.302 58.4740 2.828 71.83 2.500-.1P-.3L-TS-2A 2.310 58.67 2.234 56.74 .170 4.32 2.562 65.07C°D°B°A°MASTER KEYKEY POSITIONSPosition A0 B0 C0 D01 80 142 196 2932 135 170 200 3103 49 169 200 2444 66 140 200 2575 62 145 180 2806 79 153 197 272© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com31E-Mail: sales@glenair.com

ReceptacleConnectorsSeries 970 PowerTrip Connectors and AccessoriesReceptacle Connectors970-004 Jam Nut Receptacle970-004 Jam Nut ReceptaclesSeries 970 PowerTrip extreme environment receptacle connectors are intended forhigh current applications where size 8 AWG to size 1/0 AWG wires are used. Theseconnectors feature high ampacity LouverBand contacts. Coupling threads are triplestartACME type. EMI protected with ground spring and splined backshell interface.Standard contacts are silver plated high conductivity copper alloy, or choose goldplatedcontacts for improved corrosion protection. Fluorosilicone rubber gaskets andgrommets provide watertight sealing. Contacts are packaged with connector.• EMI Protected• High Ampacity Contacts• Splined Backshell Interface• Ratchet Self-Lockingproduct facts2000 VAC Sea Level DWV Rating-65°C to +200°C Operating Temperature6 Feet Water Immersion, 48 Hours65 dB min. Attenuation, up to 10GHz2000 Cycles Mating DurabilityMIL-S 901 Grade A High-Impact Shock43 g Random VibrationDSeries970-004Jam NutReceptacle,for Rear PanelMountingSHELL MATLand FinishMEAluminum,Electroless NickelFinishMTAluminum, Nickel-PTFE FinishNFAluminum, OliveDrab CadmiumZRAluminum, BlackZinc-Nickel FinishZ1PassivatedStainless SteelContactArr.How To OrderSHELL Size - InsertArrangementContact Size and Qty#16 #12 #8 #4 #1/018-2 218-4 2 220-3 320-4 420-5 2 320-7 4 324-2 224-3 324-5 524-6 4 224-A6 3 328-4 428-9 5 432-2 232-3 332-4 2 232-5 532-6 3 336-4 440-5 5CoNTACT TYPE ANDPLATINGP1Pin Contacts, Silver Plating*P2Pin Contacts, Gold PlatingS1Socket Contacts, SilverPlating*S2Socket Contacts, GoldPlatingAPin Connector, Suppliedwithout ContactsBSocket Connector, Suppliedwithout Contacts* Size 12 and 16 contactsare gold-plated. Size8, 4 and 1/0 are silverplated.KEY PoSITIon-1Position 1-2Position 2-3Position 3-4Position 4-5Position 5-6Position 6Sample Part Number970-004 MT 24-5 P1 -1© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com32E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesReceptacle Connectors970-004 Jam Nut ReceptacleReceptacleConnectors970-004 Jam Nut ReceptacleØ D2.070 (52.58) MAXE1.122/1.102(28.50/27.99).120/.110(3.05/2.79)RED FULL MATEINDICATOR STRIPEBGFAMATING THREADCJAM NUT THREAD.313 (7.95)MAX PANELTHICKNESSBACCESSORY THREADDimensionsShell ABCø D E F GSize Mating Thd. Accessory Thd. Jam Nut Thd. In. mm. In. mm. In. mm. In. mm.18 1.125-.1P-.3L-TS-2A 1.125-18 UNEF-2A 1.250-18 UNEF-2A 1.733 44.02 1.639 41.63 1.438 36.53 1.212 30.7820 1.250-.1P-.3L-TS-2A 1.250-18 UNEF-2A 1.4375-18 UNEF-2A 1.921 48.79 1.827 46.41 1.625 41.28 1.399 35.5324 1.500-.1P-.3L-TS-2A 1.4375-18 UNEF-2A 1.625-18 UNEF-2A 2.108 53.54 2.014 51.16 1.822 46.28 1.587 40.3128 1.750-.1P-.3L-TS-2A 1.8125-16 UN-2A 1.9375-16 UN-2A 2.425 61.60 2.327 59.11 2.188 55.58 1.899 48.2332 2.000-.1P-.3L-TS-2A 2.0625-16 UNS-2A 2.125-16 UN-2A 2.607 66.24 2.513 63.83 2.375 60.33 2.084 52.9336 2.250-.1P-.3L-TS-2A 2.250-16 UN-2A 2.375-16 UN-2A 2.857 72.57 2.763 70.18 2.625 66.68 2.323 59.0040 2.500-.1P-.3L-TS-2A 2.500-16 UN-2A 2.625-16 UN-2A 3.107 78.92 3.013 76.53 2.875 73.03 2.548 64.72DKEY POSITIONSPosition A0 B0 C0 D01 80 142 196 2932 135 170 200 3103 49 169 200 2444 66 140 200 2575 62 145 180 2806 79 153 197 272A°MASTER KEYPanel cutoutDiameter FlatIn. mm. In. mm.ShellSize-.000+.010-.00+0.25-.000+.010-.00+0.2518 1.254 31.85 1.217 30.9120 1.441 36.60 1.404 35.6624 1.629 41.38 1.592 40.6428 1.941 49.30 1.904 48.3632 2.129 54.08 2.092 53.1436 2.379 60.43 2.328 59.1340 2.629 66.78 2.553 64.85FLATRECOMMENDEDPANEL CUTOUTDIAMETERB°C°D°© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com33E-Mail: sales@glenair.com

ReceptacleConnectorsSeries 970 PowerTrip Connectors and AccessoriesReceptacle Connectors970-010 Low Profile Jam Nut Receptacle970-010 Low Profile Jam Nut Receptacles970-010 receptacles have a shorter profile than standard jam nut receptacles. Thisreduced protrusion behind the mounting panel results from removing the accessorythreads, moving the mounting flange and replacing the grommet wire seal witha thinner wire separator. Series 970 PowerTrip extreme environment receptacleconnectors are intended for high current applications where size 8 AWG to size 1/0AWG wires are used. Contacts snap into connector through rear wire separator and canbe removed with a plastic tool. These connectors feature high ampacity LouverBandcontacts. Coupling threads are triple-start ACME type. EMI protected with ground springand splined backshell interface. Standard contacts are silver plated high conductivitycopper alloy, or choose gold-plated contacts for improved corrosion protection.Contacts are packaged with connector. Red stripe indicates full mating condition970-010 connectors have a low profile wire separator instead of a thick watertight rear grommet.These connectors are splashproof but are not rated for water immersion or altitude immersion.DSeries970-010Jam NutReceptacle,for Rear PanelMounting, LowProfileSHELL MATLand FinishMEAluminum,Electroless NickelFinishMTAluminum, Nickel-PTFE FinishNFAluminum, OliveDrab CadmiumZRAluminum, BlackZinc-Nickel FinishZ1PassivatedStainless SteelContactArr.How To OrderSHELL Size - InsertArrangementContact Size and Qty#16 #12 #8 #4 #1/018-2 218-4 2 220-3 320-4 420-5 2 320-7 4 324-2 224-3 324-5 524-6 4 224-A6 3 328-4 428-9 5 432-2 232-3 332-4 2 232-5 532-6 3 336-4 440-5 5CoNTACT TYPE ANDPLATINGP1Pin Contacts, Silver Plating*P2Pin Contacts, Gold PlatingS1Socket Contacts, SilverPlating*S2Socket Contacts, GoldPlatingAPin Connector, withoutContactsBSocket Connector, withoutContacts* Size 12 and 16 contacts aregold-plated. Size 8, 4 and1/0 are silver plated.KEY PoSITIon-1Position 1-2Position 2-3Position 3-4Position 4-5Position 5-6Position 6Sample Part Number970-010 MT 24-5 P1 -1© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com34E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesReceptacle Connectors970-010 Low Profile Jam Nut ReceptacleReceptacleConnectors970-010 Low Profile Jam Nut ReceptacleØ C1.880 (47.75) MAXDRED FULLMATEINDICATORSTRIPE1.410/1.390(35.81/35.31).120/.110(3.05/2.79)BFEAMATING THREADBJAM NUT THREAD.500 (12.7)MAX PANELTHICKNESSDimensionsShellABø C D E FSize Mating Thd. Jam Nut Thd. In. mm. In. mm. In. mm. In. mm.18 1.125-.1P-.3L-TS-2A 1.250-18 UNEF-2A 1.733 44.02 1.639 41.63 1.438 36.53 1.212 30.7820 1.250-.1P-.3L-TS-2A 1.4375-18 UNEF-2A 1.921 48.79 1.827 46.41 1.625 41.28 1.399 35.5324 1.500-.1P-.3L-TS-2A 1.625-18 UNEF-2A 2.108 53.54 2.014 51.16 1.822 46.28 1.587 40.3128 1.750-.1P-.3L-TS-2A 1.9375-16 UN-2A 2.425 61.60 2.327 59.11 2.188 55.58 1.899 48.2332 2.000-.1P-.3L-TS-2A 2.125-16 UN-2A 2.607 66.24 2.513 63.83 2.375 60.33 2.084 52.9336 2.250-.1P-.3L-TS-2A 2.375-16 UN-2A 2.857 72.57 2.763 70.18 2.625 66.68 2.323 59.0040 2.500-.1P-.3L-TS-2A 2.625-16 UN-2A 3.107 78.92 3.013 76.53 2.875 73.03 2.548 64.72DKEY POSITIONSPosition A0 B0 C0 D01 80 142 196 2932 135 170 200 3103 49 169 200 2444 66 140 200 2575 62 145 180 2806 79 153 197 272A°MASTER KEYPanel cutoutDiameter FlatIn. mm. In. mm.ShellSize-.000+.010-.00+0.25-.000+.010-.00+0.2518 1.254 31.85 1.217 30.9120 1.441 36.60 1.404 35.6624 1.629 41.38 1.592 40.6428 1.941 49.30 1.904 48.3632 2.129 54.08 2.092 53.1436 2.379 60.43 2.328 59.1340 2.629 66.78 2.553 64.85FLATRECOMMENDEDPANEL CUTOUTDIAMETERB°C°D°© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com35E-Mail: sales@glenair.com

Feed-ThruConnectorsSeries 970 PowerTrip Connectors and AccessoriesThru-BulkHead Receptacles970-006E970-006 Feed-Thru Bulkhead ReceptaclesSeries 970 PowerTrip feed-thru bulkhead jam nut receptacles have pin contacts onone side and socket contacts on the other side. Mount to bulkhead and attach matingplug connectors to both sides. Coupling threads are triple-start ACME type. Contactsare factory-installed and are non-removable. Standard contacts are silver plated highconductivity copper alloy for excellent conductivity, or choose gold-plated contactsfor improved corrosion protection. Jam nut mounting, for panel thicknesses from 1/16inch (1.58mm) to ½ inch (12.7mm).• EMI Protectedproduct facts2000 VAC Sea Level DWV Rating• High Ampacity Contacts-65°C to +200°C Operating Temperature6 Feet Water Immersion, 48 Hours• Submersible65 dB min. Attenuation, up to 10GHz2000 Cycles Mating Durability• Harsh EnvironmentMIL-S 901 Grade A High-Impact Shock43 g Random VibrationHow To OrderSeriesSHELL MATL SHELL Size - InsertCoNTACTCoNTACT Typeand Finish ArrangementPLATING970-006 MEContact Contact Size and QtyArr. #16 #12 #8 #4 #1/0 P1Series 970 Aluminum,Pin Contacts on Jam Silver Plated18-2 2Feed-Thru Electroless NickelNut SidePowerBulkheadFinish 18-4 2 2Contacts (sizeReceptacle,20-3 3S1/0, 4 andJam Nut MTSocket Contacts on 8) and GoldMounting Aluminum, Nickel- 20-4 4Jam Nut Side Plated SignalPTFE Finish 20-5 2 3ContactsNF20-7 4 32JAMAluminum, Olive 24-2 2NUTGold PlatedSIDEDrab Cadmium 24-3 3ContactsZR 24-5 5Aluminum, Black 24-6 4 2Zinc-Nickel Finish 24-A6 3 3Z1 28-4 4Passivated 28-9 5 4Stainless Steel32-2 232-3 332-4 2 232-5 532-6 3 336-4 440-5 5Sample Part Number970-006 MT 24-5 P 1 -1KEYPoSITIon-1Position 1-2Position 2-3Position 3-4Position 4-5Position 5-6Position 6© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com36E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesThru-BulkHead Receptacles970-006Feed-ThruConnectors970-006 Feed-Thru ReceptacleØ CD2.260 (57.40) MAX1.328/1.298(33.73/32.97).130/.100(3.30/2.54)BFEAMATING THREADBJAM NUT THREAD.500 (12.70)MAX PANELTHICKNESSAMATING THREADDimensionsShellABø C D E FSize Mating Thd. Jam Nut Thd. In. mm. In. mm. In. mm. In. mm.18 1.125-.1P-.3L-TS-2A 1.250-18 UNEF-2A 1.733 44.02 1.639 41.63 1.438 36.53 1.212 30.7820 1.250-.1P-.3L-TS-2A 1.4375-18 UNEF-2A 1.921 48.79 1.827 46.41 1.625 41.28 1.399 35.5324 1.500-.1P-.3L-TS-2A 1.625-18 UNEF-2A 2.108 53.54 2.014 51.16 1.822 46.28 1.587 40.3128 1.750-.1P-.3L-TS-2A 1.9375-16 UN-2A 2.425 61.60 2.327 59.11 2.188 55.58 1.899 48.2332 2.000-.1P-.3L-TS-2A 2.125-16 UN-2A 2.607 66.24 2.513 63.86 2.375 60.33 2.084 53.0136 2.250-.1P-.3L-TS-2A 2.375-16 UN-2A 2.857 72.57 2.763 70.18 2.625 66.68 2.323 59.0040 2.500-.1P-.3L-TS-2A 2.625-16 UN-2A 3.107 78.92 3.013 76.53 2.875 73.03 2.548 64.72EKEY POSITIONSPosition A0 B0 C0 D01 80 142 196 2932 135 170 200 3103 49 169 200 2444 66 140 200 2575 62 145 180 2806 79 153 197 272FLATB°C°D°A°MASTER KEYDIAMETERPanel cutoutDiameter FlatIn. mm. In. mm.ShellSize-.000+.010-.00+0.25-.000+.010-.00+0.2518 1.254 31.85 1.217 30.9120 1.441 36.60 1.404 35.6624 1.629 41.38 1.592 40.6428 1.941 49.30 1.904 48.3632 2.129 54.08 2.092 53.1436 2.379 60.43 2.328 59.1340 2.629 66.78 2.553 64.85RECOMMENDEDPANEL CUTOUT© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com37E-Mail: sales@glenair.com

Feed-ThruConnectorsSeries 970 PowerTrip Connectors and AccessoriesThru-BulkHead Receptacles970-007 HermeticESeries 970 Hermetic Feed-Thru BulkheadSeries970-007Series 970Feed-ThruBulkheadReceptacle,Jam NutMounting,HermeticSHELL MATLand FinishStainless SteelShellZ1PassivatedZLElectrodepositedNickelSeries 970 PowerTrip hermetic feed-thru bulkhead receptacles have pin contacts onone side and socket contacts on the other side. Attach mating plug connectors to bothsides. Compression glass hermetic seal. 100% tested to meet helium leak rate of 1 x10 -7 cc/second at 15 psi pressure differential. . Contacts are factory-installed and arenon-removable. Standard contacts are silver plated, or choose gold-plated contactsfor improved corrosion protection. Jam nut rear panel mounting, for panel thicknessesfrom 1/16 inch (1.58mm) to ½ inch (12.7mm).• EMI Protectedproduct facts2000 VAC Sea Level DWV Rating• High Ampacity Contacts-65°C to +200°C Operating Temperature6 Feet Water Immersion, 48 Hours• Submersible65 dB min. Attenuation, up to 10GHz2000 Cycles Mating Durability• Harsh EnvironmentMIL-S 901 Grade A High-Impact Shock43 g Random VibrationContactArr.How To OrderSHELL Size - InsertArrangementContact Size and Qty#16 #12 #8 #4 #1/018-2 218-4 2 220-3 320-4 420-5 2 320-7 4 324-2 224-3 324-5 524-6 4 224-A6 3 328-4 428-9 5 432-2 232-3 332-4 2 232-5 532-6 3 336-4 440-5 5CoNTACT TypePPin Contacts on JamNut SideSSocket Contacts onJam Nut SideJAMNUTSIDECoNTACTPLATING1Silver PlatedContacts2Gold PlatedContactsKEYPoSITIon-1Position 1-2Position 2-3Position 3-4Position 4-5Position 5-6Position 6Sample Part Number970-007 Z1 32-4 S 2 -1© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com38E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesThru-BulkHead Receptacles970-007 HermeticFeed-ThruConnectors970-007 Feed-Thru ReceptaclEØ CD2.260 (57.40) MAX1.328/1.298(33.73/32.97).130/.100(3.30/2.54)BFEAMATING THREADBJAM NUT THREAD.500 (12.70)MAX PANELTHICKNESSAMATING THREADDimensionsShellABø C D E FSize Mating Thd. Jam Nut Thd. In. mm. In. mm. In. mm. In. mm.18 1.125-.1P-.3L-TS-2A 1.250-18 UNEF-2A 1.733 44.02 1.639 41.63 1.438 36.53 1.212 30.7820 1.250-.1P-.3L-TS-2A 1.4375-18 UNEF-2A 1.921 48.79 1.827 46.41 1.625 41.28 1.399 35.5324 1.500-.1P-.3L-TS-2A 1.625-18 UNEF-2A 2.108 53.54 2.014 51.16 1.822 46.42 1.587 40.3128 1.750-.1P-.3L-TS-2A 1.9375-16 UN-2A 2.425 61.60 2.327 59.11 2.188 55.58 1.899 48.2332 2.000-.1P-.3L-TS-2A 2.125-16 UN-2A 2.607 66.24 2.513 63.86 2.375 60.33 2.087 53.0136 2.250-.1P-.3L-TS-2A 2.375-16 UN-2A 2.857 72.57 2.763 70.18 2.625 66.68 2.323 59.0040 2.500-.1P-.3L-TS-2A 2.625-16 UN-2A 3.107 78.92 3.013 76.53 2.875 73.03 2.548 64.72EKEY POSITIONSPosition A0 B0 C0 D01 80 142 196 2932 135 170 200 3103 49 169 200 2444 66 140 200 2575 62 145 180 2806 79 153 197 272FLATB°C°D°A°MASTER KEYDIAMETERPanel cutoutDiameter FlatIn. mm. In. mm.ShellSize-.000+.010-.00+0.25-.000+.010-.00+0.2518 1.254 31.85 1.217 30.9120 1.441 36.60 1.404 35.6624 1.629 41.38 1.592 40.6428 1.941 49.30 1.904 48.3632 2.129 54.08 2.092 53.1436 2.379 60.43 2.328 59.1340 2.629 66.78 2.553 64.85RECOMMENDEDPANEL CUTOUT© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com39E-Mail: sales@glenair.com

Filter ConnectorsSeries 970 PowerTrip Connectors and AccessoriesFilter Receptacles240-970W Square Flange Receptacle240-970W Filter Receptacle, Square FlangeSeries 970 PowerTrip filter receptacles feature planar array ceramic capacitors. Soldercup contacts are factory-installed, epoxy sealed and are non-removable. Socket contactshave copper alloy louverband spring for multiple points of electrical contact. Couplingthreads are triple-start ACME type. Contacts are gold plated. Fluorosilicone rubber faceseal on pin connector. Aluminum or stainless steel shell.• Planar Array C Filter• -550 C to +1250 C• 1,250 VDC DWV Rating• Solder Cup Contactsinsertion lossInsertion Loss, dB minimum, 25°CCX CY CZFrequency1 MHz 22 16 1310 MHz 41 36 33100 MHz 56 53 52500 -1000 MHz 60 57 5780K-120K pF 40K-60K pF 30K-45K pFFSeries240-970WFilterReceptacle,Square FlangeShell Matland FinishMEAluminum,ElectrolessNickel FinishMTAluminum,Nickel-PTFEFinishNFAluminum,Olive DrabCadmiumZRAluminum,Black Zinc-Nickel FinishZmtStainless Steel,Nickel-PTFEFinishZ1Stainless Steel,PassivatedHow To OrderShell Size - Insert ContactArrangement TypeContactArr.Contact Size and Qty#16 #12 #8 #4 #1/018-2 218-4 2 220-3 320-4 420-5 2 320-7 4 324-2 224-3 324-5 524-6 4 224-A6 3 328-4 428-9 5 432-2 232-3 332-4 2 232-5 532-6 3 336-4 440-5 5PSPin Contact,Solder CupSSSocketContact,Solder CupFilter Type &CAPACitanceCXC Filter80,000-120,000 pFCYC Filter40,000-60,000 pFCZC Filter30,000-45,500 pFMountingHoleNThru-HoleTClinch NutsInstalled inMountingHoles forBack PanelMounting.KeyPos.1Position 12Position 23Position 34Position 45Position 56Position 6Sample Part Number240-970W ME 40-5 PS CY N 1© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com40E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesFilter Receptacles240-970W Square Flange ReceptacleFilter Connectors240-970W filter receptacle, square flangeRED MASTER KEYLOCATION STRIPE1.002/.972(25.45/24.69)1.950(49.53)MAX.130/.100(3.30/2.54)Solder CupdimensionsG TypContactSizeIn.±.025mm.±0.6416 .500 12.7012 .500 12.708 .600 15.244 .800 20.321/0 .800 20.32MOUNTING HOLE OPTION TCLINCH NUT, 4 PLCS,SELF-LOCKING, STAINLESSSTEELBASQ.DBSC.ØFMOUNTINGHOLECUTOUTØ E4 PLCS.BMATING THREADRED FULL MATEINDICATOR STRIPEGTYPCACCESSORY THREAD.250 (6.35) MAXIMUMMOUNTING PANELTHICKNESSDimensionsShell A Sq.BCD Bsc ø E Eø FSize In. mm. Mating Thread Accessory Thd In. mm. In. mm. Clinch Nut Thd In. mm.18 1.383 35.13 1.125-.1P-.3L-TS-2A 1.125-18 UNEF-2A 1.015 25.78 .146 3.71 6-32 UNC-2B 1.187 30.1520 1.508 38.30 1.250-.1P-.3L-TS-2A 1.250-18 UNEF-2A 1.140 28.96 .146 3.71 6-32 UNC-2B 1.374 34.9024 1.718 43.64 1.500-.1P-.3L-TS-2A 1.4375-18 UNEF-2A 1.281 32.54 .146 3.71 6-32 UNC-2B 1.562 39.6728 2.138 54.31 1.750-.1P-.3L-TS-2A 1.8125-16 UN-2A 1.568 39.83 .170 4.32 8-32 UNC-2B 1.874 47.6032 2.328 59.13 2.000-.1P-.3L-TS-2A 2.0625-16 UNS-2A 1.734 44.04 .170 4.32 8-32 UNC-2B 2.062 52.3736 2.578 65.48 2.250-.1P-.3L-TS-2A 2.250-16 UN-2A 1.984 50.39 .170 4.32 8-32 UNC-2B 2.302 58.4740 2.828 71.83 2.500-.1P-.3L-TS-2A 2.500-16 UN-2A 2.234 56.74 .170 4.32 8-32 UNC-2B 2.562 65.07Fmaterials and finishesShells, Jam NutsAluminum alloy orstainless steelHigh conductivityContactscopper alloy, goldover nickel platingInsulators Thermoset epoxyInterfacial Seal FluorosiliconeClinch Nut Stainless steelC°D°B°A°MASTERKEYWAYKEY POSITIONSPosition A0 B0 C0 D01 80 142 196 2932 135 170 200 3103 49 169 200 2444 66 140 200 2575 62 145 180 2806 79 153 197 272© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com41E-Mail: sales@glenair.com

Filter ConnectorsSeries 970 PowerTrip Connectors and AccessoriesFilter Receptacles240-970J Jam Nut Receptacle240-970J Filter Receptacle, Jam NutSeries 970 PowerTrip filter receptacles feature planar array ceramic capacitors. Soldercup contacts are factory-installed, epoxy sealed and are non-removable. Socket contactshave copper alloy louverband spring for multiple points of electrical contact. Couplingthreads are triple-start ACME type. Contacts are gold plated. Fluorosilicone rubber faceseal on pin connector. Aluminum or stainless steel shell.• Planar Array C Filter• -550 C to +1250 C• 1,250 VDC DWV Rating• Solder Cup Contactsinsertion lossInsertion Loss, dB minimum, 25°CCX CY CZFrequency1 MHz 22 16 1310 MHz 41 36 33100 MHz 56 53 52500 -1000 MHz 60 57 5780K-120K pF 40K-60K pF 30K-45K pFFSeries240-970JFilterReceptacle,Jam NutShell Matland FinishMEAluminum,ElectrolessNickel FinishMTAluminum,Nickel-PTFEFinishNFAluminum,Olive DrabCadmiumZRAluminum,Black Zinc-Nickel FinishZmtStainless Steel,Nickel-PTFEFinishZ1Stainless Steel,PassivatedHow To OrderShell Size - Insert ContactArrangement TypeContactArr.Contact Size and Qty#16 #12 #8 #4 #1/018-2 218-4 2 220-3 320-4 420-5 2 320-7 4 324-2 224-3 324-5 524-6 4 224-A6 3 328-4 428-9 5 432-2 232-3 332-4 2 232-5 532-6 3 336-4 440-5 5PSPin Contact,Solder CupSSSocketContact,Solder CupFilter Type &CAPACitanceCXC Filter80,000-120,000 pFCYC Filter40,000-60,000 pFCZC Filter30,000-45,500 pFMountingstyleNStandardMountingKeyPos.1Position 12Position 23Position 34Position 45Position 56Position 6Sample Part Number240-970J ME 40-5 PS CY N 1© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com42E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesFilter Receptacles240-970J Jam Nut ReceptacleFilter Connectors240-970J DimensionsØ DESQ.RED FULL MATEINDICATOR STRIPE1.122/1.102(28.50/27.99)1.950 (49.53) MAX.120/.110(3.05/2.79)Solder CupdimensionsContact H TypSize In. mm.16 .500 12.7012 .500 12.708 .600 15.244 .800 20.321/0 .800 20.32BGFlatFAMATING THREADCJAM NUT THREAD.313 (7.95)MAX PANELTHICKNESSHTYPBACCESSORY THREADDimensionsShell ABCø D E Sq. F G FlatSize Mating Thd. Accessory Thd. Jam Nut Thd. In. mm. In. mm. In. mm. In. mm.18 1.125-.1P-.3L-TS-2A 1.125-18 UNEF-2A 1.250-18 UNEF-2A 1.733 44.02 1.639 41.63 1.438 36.53 1.212 31.0620 1.250-.1P-.3L-TS-2A 1.250-18 UNEF-2A 1.4375-18 UNEF-2A 1.921 48.79 1.827 46.41 1.625 41.28 1.399 35.8124 1.500-.1P-.3L-TS-2A 1.4375-18 UNEF-2A 1.625-18 UNEF-2A 2.108 53.54 2.014 51.16 2.000 50.80 1.587 43.7628 1.750-.1P-.3L-TS-2A 1.8125-16 UN-2A 1.9375-16 UN-2A 2.425 61.60 2.327 59.11 2.188 55.58 1.899 48.5132 2.000-.1P-.3L-TS-2A 2.0625-16 UNS-2A 2.125-16 UN-2A 2.607 66.24 2.514 63.86 2.375 60.33 2.084 52.9336 2.250-.1P-.3L-TS-2A 2.250-16 UN-2A 2.375-16 UN-2A 2.857 72.57 2.763 70.18 2.625 66.68 2.323 59.0040 2.500-.1P-.3L-TS-2A 2.500-16 UN-2A 2.625-16 UN-2A 3.107 78.92 3.013 76.53 2.875 73.03 2.548 64.72KEY POSITIONSPosition A0 B0 C0 D01 80 142 196 2932 135 170 200 3103 49 169 200 2444 66 140 200 2575 62 145 180 2806 79 153 197 272B°A°MASTERKEYWAYPanel cutoutDiameter FlatIn. mm. In. mm.ShellSize-.000+.010-.00+0.25-.000+.010-.00+0.2518 1.254 31.85 1.217 30.9120 1.441 36.60 1.404 35.6624 1.629 41.38 1.592 40.6428 1.941 49.30 1.904 48.3632 2.129 54.08 2.092 53.1436 2.379 60.43 2.328 59.1340 2.629 66.78 2.553 64.85FLATRECOMMENDEDPANEL CUTOUTDIAMETERFC°D°© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com43E-Mail: sales@glenair.com

pOWERtRIPpOWERLINEFILTERSPOWERLINE FILTERS WITHCOMMON MODE CHOKES ANDLINE-TO-LINE FILTERINGContact factory for high-performance, low heatdissipation powerline filteringPowerline filters suited for filtering DC and AC mains services are typically designedto incorporate both common-mode and differential-mode filters (line-to-line).Common mode chokes capable of screening both incoming and outgoing noiseand transients (see example schematic) are ideally suited for incorporation in Series970 PowerTrip filter connectors. All multiple-line filters employ modern filter elementsincorporating compensating inductors or coupled chokes. PowerTrip powerline filtersare typically suppliedPIN A:a s m a d e - t o - o r d e rLCY(bespoke) solutions.CXCXSHELLPlease contact theRGNDfactory for applicationLCYengineering assistance. PIN B:INPUTOUTPUTGlenair, Inc.1211 Air WayGlendale, CA91201-2497818-247-6000sales@glenair.comwww.glenair.com

Series 970 PowerTrip Connectors and AccessoriesContacts and ToolsCrimp ContactsContacts and Toolscrimp contactsSeries 970 PowerTrip contacts for size #16 through Size #1/0 wire. Size #8, #4 and #1/0contacts are high conductivity copper alloy (IACS >90%) with silver or gold plating.Size #12 and #16 contacts are copper alloy with gold over palladium finish. Size #1/0,4 and 8 socket contacts feature low resistance, high durability louverband springs.Terminate to wire with standard crimp tools. Contacts are snap-in, rear-release andmeet the performance requirements of SAE AS39029.• LouverBand Springs• High Conductivity Alloy• Crimp Termination• Gold or Silver PlatingBPin ContactSocket ContactMaterial and Finish SpecificationsPin, Size Copper alloy, gold flash#16 and #12 over palladium finishPin, Size #8,#4 and #1/0Socket, Size#16 and #12Socket, Size#8, #4 and#1/0High conductivitycopper alloy, gold orsilver finish over nickelCopper alloy, stainlesssteel hood, gold flashover palladium finishHigh conductivitycopper alloy, berylliumcopper louverbandspring, gold or silverfinish over nickelCrimp ContactsSizeWirePin Contact Socket Contact Socket ContactFinishSizePart Number Part Number Type16 #16–#20 Gold/Palladium 850-037-16 850-038-16 Split-Tine12 #12–#14 Gold/Palladium 850-037-12 850-038-12 Split-Tine8#8Silver 850-026-8-8-1 850-027-8-8-1 LouverBandGold 850-026-8-8-2 850-027-8-8-2 LouverBand#10Silver 850-026-8-10-1 850-027-8-10-1 LouverBandGold 850-026-8-10-2 850-027-8-10-2 LouverBand4#4Silver 850-026-4-4-1 850-027-4-4-1 LouverBandGold 850-026-4-4-2 850-027-4-4-2 LouverBand#6Silver 850-026-4-6-1 850-027-4-6-1 LouverBandGold 850-026-4-6-2 850-027-4-6-2 LouverBand1/0#1/0Silver 850-026-0-0-1 850-027-0-0-1 LouverBandGold 850-026-0-0-2 850-027-0-0-2 LouverBand#2Silver 850-026-0-2-1 850-027-0-2-1 LouverBandGold 850-026-0-2-2 850-027-0-2-2 LouverBandTools for Contact Crimping and InstallationContactSizeInsertion/ExtractionToolContact Current Rating and ResistanceContact and WireSizeExtractionToolCurrent Rating at20° C(Amperes)Crimp Tool Positioner Die Set Locator#16 809-131 — 809-136 859-032 — —#12 809-132 — 809-136 859-032 — —#8 — 859-022 859-025 — 859-026 859-029#4 — 859-023 859-025 — 859-027 859-030#1/0 — 859-024 859-025 — 859-028 859-031Current Rating at80° C(Amperes)Max. ContactResistance(milliohms)#16 22 13 6.0#12 41 23 3.0#8 73 46 1.0#4 135 80 0.5#1/0 245 150 0.3G© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com45E-Mail: sales@glenair.com

Contacts and ToolsSeries 970 PowerTrip Connectors and AccessoriesContacts and ToolsCrimp Contactspin contacts.874(22.20).031(0.79)Ø.067(1.70)Ø.103(2.62).874(22.20).031(0.79)Ø.100(2.54)Ø .063 (1.60) .264(6.71)MINØ .094(2.39).264(6.71)MIN850-037-16 850-037-12Ø.149(3.78)Ø.305(7.75)1.405(35.69).031(0.79)Ø.142(3.61)Ø.305(7.75)1.517(38.53).031(0.79)Ø.142(3.61)Ø.180 MIN(4.57)Ø.135 MIN850-026-8-8 (3.43)850-026-8-101.275(32.39)1.397(35.48)Ø.279 MIN(7.09)Ø .416(10.57).046(1.17)Ø .225 MIN(5.72)Ø .416(10.57).046(1.17).485(12.32)Ø .225(5.72).620(15.75)850-026-4-4 850-026-4-6Ø .225(5.72)G.046(1.17)1.401(35.59)1.572(39.93).046(1.17)Ø.451 (11.46)MINØ.359 (9.12)MINØ .357Ø .613(9.07)(15.57)850-026-0-0 850-026-0-2Ø .613(15.57)Ø .357(9.07)© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com46E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesContacts and ToolsCrimp ContactsContacts and Toolssocket contacts1.162(29.51).030(0.76)Ø.070(1.78)Ø.100(2.54)1.162(29.51).031(0.79)Ø.100(2.54)Ø .111 (2.82).260(6.60)MINØ .158 (4.01).264(6.71)MIN850-038-16 850-038-12Ø.149(3.78)B1.404 (35.66).031(0.79)Ø.305(7.75)1.516 (38.51) Ø.305.031(7.75)(0.79)Ø.250(6.35).490Ø.250.602Ø.180 MIN(15.29)(12.45)(6.35)(4.57)MIN850-027-8-8 850-027-8-10Ø.135 MIN(3.43)1.402 (35.61)1.280 (32.51).046(1.17)Ø .335(8.51)Ø .416(10.57).279 (7.09)MINØ .335(8.51)Ø .416(10.57).485(12.32)MIN850-027-4-4 850-027-4-6.620(15.75)MIN.224 (5.69)MIN1.406(35.71).046(1.17)1.577(40.06).046(1.17)GØ .517(13.13).451 (11.46)MINØ .517(13.13).357 (15.57)MINØ .613(15.57).580Ø .613(14.73)(15.57)MIN850-027-0-0 850-027-0-2.755(19.18)MIN© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com47E-Mail: sales@glenair.com

Contacts and ToolsSeries 970 PowerTrip Connectors and AccessoriesContacts and ToolsCrimp ToolsHand Crimp Tool And Positioner For #12 and #16 ContactsAACrimp tool for use with size #16 and #12Series 970 pin and socket contacts. Usewith turret-type positioner 859-032. 9.75inches OAL, 1.25 pounds.BPositioner for use with size #12 and #16contacts. Rotate turret head to blueposition for #16 contact termination, yellowposition for #12 contacts.BFigurePart NumberMilitary PartNumberA 809-136 M22520/1-01 AF8B 859-032 M22520/1-02 TH1ADaniels PartNumberPneumatic Crimp Tool For #8, #4 and #1/0 ContactsCCBench mount pneumatic crimptool. Heavy duty, four-indent crimptermination. Attach to air supply with quickdisconnectfitting or install 1/4 NPT fitting intotapped port. 90-120 psi air supply. Requiresdie assemblies and locators, sold separately.Hand actuate with push-button valve triggeron handle. Steel with black wrinkle enamelcoating. 13 inches overall length, 9.2 inchestall, 17 pounds (7.7 Kg).DIndenter Die Assembly. Precision fourindentdie with hardened tool steelindenters, stainless steel housing. Separatedie assembly required for each contact size.Locator. Aluminum locator positionsE contact at correct depth for crimping.Separate locator required for each contact size.EDFigureContactSizeDescriptionPart NumberMilitary PartNumberDaniels PartNumberC — Pneumatic Crimper 859-025 M22520/23-01 WA23D 8 Die Assembly 859-026 M22520/23-02 WA23-2D 4 Die Assembly 859-027 M22520/23-04 WA23-4D 1/0 Die Assembly 859-028 M22520/23-05 WA23-5E 8 Locator 859-029 M22520/23-09 WA23-9E 4 Locator 859-030 M22520/23-11 WA23-11E 1/0 Locator 859-031 M22520/23-13 WA23-13C PNEUMATICTOOL859-025GCOVERSUPPLIED WITHPNEUMATIC TOOL859-025ELOCATOR859-029 (SIZE 8)859-030 (SIZE 4)859-031 (SIZE 1/0)INDENTER DIEASSEMBLY859-026 (SIZE 8)859-027 (SIZE 4)859-028 (SIZE 1/0)D© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com48E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesContacts and ToolsTools, Sealing PlugsContacts and ToolsContact Insertion and Removal ToolsInstall and remove PowerTrip contacts with plastic tools. Size #12 and #16 tools are usedfor both insertion and extraction. Size 8, 4 and 1/0 tools are used for contact removal only.14253Figure Size Type Part Number Military Part Number1 #16 Insertion/Extraction 809-131 M81969/14-032 #12 Insertion/Extraction 809-132 M81969/14-043 #8 Extraction only 859-022 M81969/14-064 #4 Extraction only 859-023 M81969/14-075 #1/0 Extraction only 859-024 M81969/14-08BGrommet Sealing Plugs12 345Grommet sealing plugs prevent moisture and contamination from entering unwiredconnector positions. Molded thermoplastic. Size 12 and size 16 plugs can be insertedwith contact insertion tools. Size 8 and larger can be inserted by hand with no tool.Bulk packaged.Figure Size Color Part Number Military Part Number1 #16 Blue 859-036 MS27488-16-32 #12 Yellow 859-037 MS27488-12-33 #8 Red 859-038 MS27488-8-34 #4 Blue 859-039 MS27488-4-35 #1/0 Yellow 859-040 MS27488-0-3Band-master ats shield termination tool and bandsFast, cost-effective shield termination. Attach cable shield to 440-069 EMI/RFI backshellswith stainless steel bands. The Band-Master system offers fast termination andthe flexibility to handle a wide range of parts with just one band size. Approved forAaerospace and defense, Band-Master shield terminations have successfully passedrigorous shock, vibration and environmental testing.ABanding tool for use with .250" (6.4mm)width bands. Digital counter improvescalibration interval accuracy. Supplied withhardshell case and instruction booklet. 1.18 lbs.,5.75” length.B.250” (6.4mm) width band. Supplied flat orpre-coiled in two lengths. Stainless steel.BContact Glenair or visit our website(www.glenair.com) to view our completeline of Band-Master produc ts,including pneumatic tools for highvolume production and calibration kits.Figure Description Part NumberA Micro Band Installation Tool 600-061FigureLength Part Number Acommodates Diameterin. mm. Flat Pre-Coiled in. mm.B 14.256 362.10 600-052 600-052-1 1.8 45.7B 18.000 457.2 600-090 600-090-1 2.5 63.5.350 (8.9)LENGTH ± .060 (1.5).240 (6.10)TAIL LENGTHINDICATOR MARKG© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com49E-Mail: sales@glenair.com

Contacts and ToolsSeries 970 PowerTrip Connectors and AccessoriesContacts and ToolsConnector Holding Tools, Backshell Assembly Toolsconnector holding toolSimplify backshell installation withconnector holding tools. Tool preventsconnector damage by securely holdingthe connector mating face in positionwhile tightening a backshell ontoconnector. Install holding tool ontotorque wrench. 3/8” square drive. Heattreatedsteel with nickel plating.APlug tool for use with 970-001 plugconnectors.how to orderShellShell Polarizing PositionSize Fig. Type 1 2 3 4 5 618A Plug 600P005-18P1 600P005-18P2 600P005-18P3 600P005-18P4 600P005-18P5 600P005-18P6B Recep 600P005-18R1 600P005-18R2 600P005-18R3 600P005-18R4 600P005-18R5 600P005-18R620A Plug 600P005-20P1 600P005-20P2 600P005-20P3 600P005-20P4 600P005-20P5 600P005-20P6B Recep 600P005-20R1 600P005-20R2 600P005-20R3 600P005-20R4 600P005-20R5 600P005-20R624A Plug 600P005-24P1 600P005-24P2 600P005-24P3 600P005-24P4 600P005-24P5 600P005-24P6B Recep 600P005-24R1 600P005-24R2 600P005-24R3 600P005-24R4 600P005-24R5 600P005-24R628A Plug 600P005-28P1 600P005-28P2 600P005-28P3 600P005-28P4 600P005-28P5 600P005-28P6B Recep 600P005-28R1 600P005-28R2 600P005-28R3 600P005-28R4 600P005-28R5 600P005-28R632A Plug 600P005-32P1 600P005-32P2 600P005-32P3 600P005-32P4 600P005-32P5 600P005-32P6B Recep 600P005-32R1 600P005-32R2 600P005-32R3 600P005-32R4 600P005-32R5 600P005-32R636A Plug 600P005-36P1 600P005-36P2 600P005-36P3 600P005-36P4 600P005-36P5 600P005-36P6B Recep 600P005-36R1 600P005-36R2 600P005-36R3 600P005-36R4 600P005-36R5 600P005-36R640A Plug 600P005-40P1 600P005-40P2 600P005-40P3 600P005-40P4 600P005-40P5 600P005-40P6B Recep 600P005-40R1 600P005-40R2 600P005-40R3 600P005-40R4 600P005-40R5 600P005-40R6backshell assembly toolsGlenair assembly tools accomplish proper tightening of adapters and backshells. Torquewrenches, soft jaw pliers, strap wrenches, and circular wrenches speed up assemblyand prevent damage to connectors and backshells.BReceptacle tool for use with 970 Seriesreceptacle connectors.GInterconnect CableAssembly ToolsBand-It ® Shield Termination Tools,Connector-to-Backshell Holding Tools,Fiber Optic Termination Kits and More!U n i t e d S t a t e s U n i t e d K i n g d o m G e r m a n y F r a n c e N o r d i c I t a l y S p a i n J a p a nI n t e rconnec t Cable A s s e m b l yTools Catalog has assembly tools,shield termination tools, fiber optictermination tools. Contact Glenair orgo to www.glenair.com.© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com50E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesAccessoriesAccessoriesBackshells and accessories for Series 970 connectorsShrink Boot AdaptersThese spin-coupling adapters areavailable in straight, 45° and 90°versions. Use with unshielded cable.310-001 Page 52EMI Band-Master AdaptersThese spin-coupling banding adaptershave a knurled platform for EMI shieldattachment and boot groove.440-069 Page 58Heatshrink BootsRugged boots provide strain relief andenvironmental protection. Available inlow-toxicity material.770-003 Page 54BStrain Relief ClampOpen frame cable clamp is designedfor use with large, heavy power cable.Optional wire support bushing.620PS076 Page 56Submersible BackshellHeavy duty environmental backshellfeatures saddle clamp or wire meshcordgrip for strain relief.370-024 Page 60EMI/RFI BackshellNon-environmental backshell withground rings for cable shield termination,heavy duty saddle bar clamp.380-105 Page 64Submersible EMI BackshellHeavy duty environmental backshellfeatures ground rings, silicone O-ringsand cable gland.390-055 Page 67Submersible EMI BackshellMIL-DTL-28840 type heavy dutybackshell, straight exit, with saddle barstrain relief.390PS036 Page 72Submersible EMI BackshellMIL-DTL-28840 type heavy dutybackshell, straight exit, with wire meshcord grip.390PS086 Page 70Protective CoversThread-on metal covers witha variety of attachments.660PS097/098Page 76Bean Rubber CoversBlack rubber covers withmultiple attachement styles.780-001/002Page 79Mounting GasketsElastomeric gaskets forsquare flange receptacles.930-014Page 74Nut PlatesSelf-locking nut plates forconnector mounting.480-002Page 75H© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com51E-Mail: sales@glenair.com

AccessoriesSeries 970 PowerTrip Connectors and AccessoriesAccessories310-001 Heatshrink Boot Adapters310-001 Boot AdaptersAttach Series 77 heatshrink boots to PowerTrip connectors with spin-coupling 310-001boot adapters. These adapters feature self-locking ratchet to prevent loosening undervibration. Boot groove accepts standard lipped heatshrink boots.How To Order Adapters with BootsAdd “T” to the adapter part numbers in thetable below. The adapter and boot will besupplied as a kit.Example: 310PS001ME18TFig. 1Straight (Style S)Fig. 245° (Style H)Fig. 390° (Style J)HFig. Type ShellSizeFig. 1Fig. 2 45°Fig. 3 90°Straightaluminumwith NICKELplating (ME)How To OrderaluminumwithNickel-PTFEPLATING(MT)Aluminumwith OliveDrabCadmiumPLATING (NF)aluminumwith BlackZinc-NICKELplating (ZR)PASSIVATEDSTAINLESSSteel(Z1)18 310PS001ME18 310PS001MT18 310PS001NF18 310PS001ZR18 310PS001Z11820 310PS001ME20 310PS001MT20 310PS001NF20 310PS001ZR20 310PS001Z12024 310PS001ME24 310PS001MT24 310PS001NF24 310PS001ZR24 310PS001Z12428 310PS001ME28 310PS001MT28 310PS001NF28 310PS001ZR28 310PS001Z12832 310PS001ME32 310PS001MT32 310PS001NF32 310PS001ZR32 310PS001Z13236 310PS001ME36 310PS001MT36 310PS001NF36 310PS001ZR36 310PS001Z13640 310PS001ME40 310PS001MT40 310PS001NF40 310PS001ZR40 310PS001Z14018 310PH001ME18 310PH001MT18 310PH001NF18 310PH001ZR18 310PH001Z11820 310PH001ME20 310PH001MT20 310PH001NF20 310PH001ZR20 310PH001Z12024 310PH001ME24 310PH001MT24 310PH001NF24 310PH001ZR24 310PH001Z12428 310PH001ME28 310PH001MT28 310PH001NF28 310PH001ZR28 310PH001Z12832 310PH001ME32 310PH001MT32 310PH001NF32 310PH001ZR32 310PH001Z13236 310PH001ME36 310PH001MT36 310PH001NF36 310PH001ZR36 310PH001Z13640 310PH001ME40 310PH001MT40 310PH001NF40 310PH001ZR40 310PH001Z14018 310PJ001ME18 310PJ001MT18 310PJ001NF18 310PJ001ZR18 310PJ001Z11820 310PJ001ME20 310PJ001MT20 310PJ001NF20 310PJ001ZR20 310PJ001Z12024 310PJ001ME24 310PJ001MT24 310PJ001NF24 310PJ001ZR24 310PJ001Z12428 310PJ001ME28 310PJ001MT28 310PJ001NF28 310PJ001ZR28 310PJ001Z12832 310PJ001ME32 310PJ001MT32 310PJ001NF32 310PJ001ZR32 310PJ001Z13236 310PJ001ME36 310PJ001MT36 310PJ001NF36 310PJ001ZR36 310PJ001Z13640 310PJ001ME40 310PJ001MT40 310PJ001NF40 310PJ001ZR40 310PJ001Z140© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com52E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesAccessories310-001 Heatshrink Boot AdaptersAccessories310-001 BOOT ADAPTERSSELF-LOCKINGDEVICEA THREADC MAXSELF-LOCKINGDEVICEA THREADH MAXØ BØ DØ EØ BBKNURLStraight(Style S)KNURLJ MAXSELF-LOCKINGDEVICEA THREADF MAXRRADIUSG MAXØ D45°(Style H)Ø BØ E90°(Style J)KNURLRRADIUSØ DØ EDimensionsShell A ø B Max. C Max. ø D Min. ø E Max. F Max. G Max. H Max. J Max. R Max.Size Thread In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm.18 1.125-18 UNEF-2B 1.39 35.3 1.250 31.8 .724 18.4 1.005 25.5 .750 19.1 1.00 25.4 1.38 35.1 1.63 41.4 .88 22.420 1.250-18 UNEF-2B 1.53 38.9 1.250 31.8 .858 21.8 1.139 28.9 .812 20.6 1.06 26.9 1.50 38.1 1.75 44.5 1.00 25.424 1.4375-18 UNEF-2B 1.72 43.7 1.250 31.8 1.043 26.5 1.324 33.6 .937 23.8 1.19 30.2 1.75 44.5 2.00 50.8 1.25 31.828 1.8125-16 UN-2B 2.13 54.1 1.250 31.8 1.353 34.4 1.625 41.2 1.000 25.4 1.25 31.8 2.19 55.7 2.44 62.0 1.50 38.132 2.0625-16 UNS-2B 2.35 59.7 1.315 33.4 1.620 41.4 1.901 48.3 1.130 28.7 1.38 35.1 2.50 63.5 2.75 69.9 1.75 44.536 2.250-16 UN-2B 2.59 65.8 1.315 33.4 1.823 46.3 2.104 53.4 1.500 38.1 1.75 44.5 2.63 66.8 2.88 73.2 2.25 57.240 2.500-16 UN-2B 2.87 70.6 1.315 33.4 2.050 52.1 2.331 59.2 1.500 38.1 1.75 44.5 2.63 66.8 2.88 73.2 2.25 57.2materials and finishesCoupling nut, backshell: aluminum orstainless steel. See How To Order formaterial & finish options.Anti-decoupling spring, bushing: hightemperaturethermoplasticinstallation TorqueRecommendedShellSizeInstallation TorqueInch-Pounds ± 518 11620, 24 13628, 32, 36 14840 164H© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com53E-Mail: sales@glenair.com

AccessoriesSeries 970 PowerTrip Connectors and AccessoriesAccessories770-003S Heatshrink BootsHHeatshrink BootsAbout User-InstalledAdhesiveHeat-shrink boots are not watertightunless equipped with pre-coatedor user-installed adhesives. Whenheat is applied to the boot, theadhesive melts and fixes the bootto the adapter and cable jacket toprovide the necessary sealing aswell as mechanical strain-relief. Formaximum performance Glenairrecommends Type U user-installedtwo-part epoxy adhesive whichoffers reduced boot installation timeand easier installation. Pre-coatedboots require additional care toinstall because the boot must beheated sufficiently to activate theepoxy, at the risk of overheating theoverall assembly. A single 50 ml duosyringe can coat many boots. Theduo syringe can be re-capped forre-use. Inexpensive mixing nozzlesmust be discarded after each use.NOTE: Glenair high-performancetwo part epoxy meets VG95343part 15.S e e n e x t p a g e f o r o r d e r i n ginformation on user-installed twopart epoxy adhesive.Series 77 “Full Nelson”Environmental Shrink BootsPlus Transitions, Convoluted Boots, andAdapters For Harsh-EnvironmentCable AssembliesU n i t e d S t a t e s • U n i t e d K i n g d o m • G e r m a n y • F r a n c e • N o r d i c • I t a l y • S p a i n • J a p a nSeries 77 “Full Nelson” Shrink BootCatalog has additional boot styles,technical information, installationinstructions and other heatshrinkproducts. Contact Glenair or go towww.glenair.com.Heatshrink boots provide strain relief and environmental protection. Shape-memorypolymer returns to as-molded shape when heat is applied. Use with 310-001 unshieldedboot adapters or 440-069 Band-Master EMI adapters . Boot lip fits adapter groovefor precise fit. Semi-rigid high performance elastomer resists high temperature andwithstands exposure to petroleum-based fluids and fuels. Also available with nonhalogenatedflame-retartant polyolefin for use where limited fire hazard is required.MATERIAL SELECTION GUIDE1 High Performance Elastomer -75°C to +150°C. Semi-rigid high performance elastomercombines excellent resistance to fuels, oils and solvents with superior performance atextreme temperatures. Material meets the requirements of VG95343 Type 6, BSG 198-5-DE, EN62329-102 and SAE AS5258 Type H. These boots are recommended for demandingapplications such as military vehicles and petrochemical exploration.2 Zero Halogen Polyolefin -30°C to +135°C. Low Smoke Zero Halogen (LSZH) polyolefinboots meet low smoke and toxicity requirements of shipboard, transit and aircraft systems.Oxygen index greater than 30%, smoke index less than 20, and toxicity index under 3 per100 grams. Material meets requirements of NAVSEA 5617649, VG95343 Part 29, BSG 198-5-DF, EN62329-101 and SAE AS5258 Type G. Good resistance to oils, fuels and solvents.PRE-COATED ADHESIVE SELECTION GUIDEW1Low Smoke Zero halogen (LSZH) polyamide hot melt adhesive Coating. Bonds wellto a variety of substrates. Good creep resistance at elevated temperatures. Excellentbond strength at low temperature. Good resistance to fuels and oils. -55°C to +125°C.Compatible with Type 1 and Type 2 boot materials.RHigh Temperature Epoxy Adhesive Coating. Glenair’s highest performance pre-coatedadhesive. The material requires careful installation using trained operators. -75°C to 150°C.Withstands prolonged high temperature immersion in fuels and oils. Excellent peel adhesionon a wide range of materials. Compatible with Type 1 boot material only.How to OrderSeries MATERIAL Boot Size770-003SHeatshrinkBoot,Lipped,Straight1HighPerformanceElastomer,Semi-Rigid,-75°C to +150°C2Low Smoke,Zero HalogenPolyolefin,Semi-Flexible,-30°C to +135°CADAPTERDIAMETERAdapter DiameterBoot Inches mm.Size Min. Max. Min. Max.02 .350 .600 8.9 15.203 .450 .850 11.4 21.604 .600 1.000 15.2 25.405 .750 1.200 19.1 30.506 .900 1.350 22.9 34.307 1.250 1.650 31.8 41.908 1.400 2.250 35.6 57.209 1.870 2.470 47.5 62.710 2.400 3.250 61.0 82.6AdhesiveLiningOmit for noadhesive lining.W1Hot Melt AdhesiveLow Smoke, ZeroHalogen-55°C to +125°CRHigh TemperatureEpoxy Adhesive-75°C to +150°C.Use with Type 1High PerformanceElastomer only. Notfor use with Type 2material.Sample Part Number770-003S 2 06 r© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com54E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesAccessories770-003S Heatshrink BootsAccessoriesHeatshrink BOOT DIMENSIONSABCAS SUPPLIED(EXPANDED)AFTERSHRINKING(RECOVERED)DEFGBootSizeA Min. B Max. C ± 20% D ± 10% E Ref. F ± 30% G Max.In. mm. In. mm. In. mm. In. mm. In. mm. In. mm. In. mm.00 .354 9.0 .079 2.0 .028 0.7 .984 25.0 .551 14.0 .039 1.0 .217 5.501 .472 12.0 .118 3.0 .028 0.7 .984 25.0 .551 14.0 .043 1.1 .276 7.002 .669 17.0 .138 3.5 .028 0.7 1.181 30.0 .728 18.5 .051 1.3 .276 7.003 .945 24.0 .197 5.0 .035 0.9 1.496 38.0 .748 19.0 .063 1.6 .413 10.504 1.181 30.0 .236 6.0 .039 1.0 2.165 55.0 1.181 30.0 .071 1.8 .551 14.005 1.260 32.0 .276 7.0 .047 1.2 2.638 67.0 1.299 33.0 .071 1.8 .709 18.006 1.417 36.0 .335 8.5 .047 1.2 3.150 80.0 1.575 40.0 .079 2.0 .866 22.007 1.693 43.0 .394 10.0 .051 1.3 3.898 99.0 2.165 55.0 .087 2.2 1.102 28.008 2.362 60.0 .591 15.0 .063 1.6 5.118 130.0 1.969 50.0 .130 3.3 1.378 35.009 2.599 66.0 .661 16.8 .079 2.0 6.693 170.0 3.543 90.0 .150 3.8 1.752 44.510 3.400 86.4 1.060 26.9 .130 3.3 7.700 195.6 4.005 102.0 .160 4.1 2.250 57.2BBoot identification markINGHeatshrink boots are identified withmolded-in lettering. This lettering showsthe boot type, boot size and orientation.Position the boot so that the lipped“A” end is toward the adapter and the“C” end is toward the cable. Assemblyinstructions are in the Series 77 “FullNelson” Environmental Shrink Bootscatalog, available at www.glenair.com.EXPANDEDLETTER “C”INDICATESCABLE ENDLIPPED ENDLETTER “A”INDICATES ADAPTER(CONNECTOR) ENDRECOVEREDUSER-INSTALLED BOOT ADHESIVE, DISPENSING GUN AND MIxING NOZZLEPart Number779-001Part Number779-002Part Number Count Per Pack779-003 12High performance flexible two part thermosetepoxy provides high strength flexible bondfrom -55° to 150°C. 50 ml duo syringe fitsstandard dispensing guns. Use with squaregreen mixing nozzle sold separately. 12 hourcure time at 20°C, 1 hour at 85°C, 30 minutesat 150°C. Apply to inside of boot with woodenspatula. 18 month shelf life.Twin push-rod 1:1 ratio epoxy dispensinggun for use with duo syringe epoxy andmixing nozzle sold separately. Durableheavy-duty plastic. Gun type hand grip withratcheting trigger to advance push-rods.1:1 ratio mixing nozzle attaches to duosyringe with 1/2 turn and locks into place.Nozzle provides consistent mixing of resinand hardener. Kit consists of (12) nozzles.H© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com55E-Mail: sales@glenair.com

AccessoriesSeries 970 PowerTrip Connectors and AccessoriesAccessories620PS076 Strain Relief Clamp620PS076 Strain Relief ClampSpin coupling strain relief clamp with anti-decoupling ratchet prevents looseningunder vibration. Fits standard Series 970 connectors. Heavy duty saddle clamp withtelescoping screws. Available rigid dielectric bushing provides additional wire support.Aluminum alloy or stainless steel coupling nut, cable clamp and saddle bars. Stainlesssteel screws, high temperature thermoplastic anti-decoupling device and wire supportbushing.Optional Wire Support Bushing holds wires in place toprevent contact splay or grommet distortion. Not availablefor layouts with size #12 or #16 contacts.ShellSize18202428323640WireSupportBushingLayoutAlum/NICKEL(ME)how to orderMaterial/Finish OptionAlum/ Alum/ ODNICKEL-PTFE Cadmium(MT) (NF)Alum/Black Zinc-NICKEL (ZR)SST/PASSIVATE(Z1)No Bushing All 620PS076ME18 620PS076MT18 620PS076NF18 620PS076ZR18 620PS076Z118Bushing Included 18-2 620PS076ME18B2 620PS076MT18B2 620PS076NF18B2 620PS076ZR18B2 620PS076Z118B2No Bushing All 620PS076ME20 620PS076MT20 620PS076NF20 620PS076ZR20 620PS076Z120Bushing Included20-3 620PS076ME20B3 620PS076MT20B3 620PS076NF20B3 620PS076ZR20B3 620PS076Z120B320-4 620PS076ME20B4 620PS076MT20B4 620PS076NF20B4 620PS076ZR20B4 620PS076Z120B4No Bushing All 620PS076ME24 620PS076MT24 620PS076NF24 620PS076ZR24 620PS076Z12424-2 620PS076ME24B2 620PS076MT24B2 620PS076NF24B2 620PS076ZR24B2 620PS076Z124B2Bushing Included 24-3 620PS076ME24B3 620PS076MT24B3 620PS076NF24B3 620PS076ZR24B3 620PS076Z124B324-5 620PS076ME24B5 620PS076MT24B5 620PS076NF24B5 620PS076ZR24B5 620PS076Z124B5No Bushing All 620PS076ME28 620PS076MT28 620PS076NF28 620PS076ZR28 620PS076Z128Bushing Included 28-4 620PS076ME28B4 620PS076MT28B4 620PS076NF28B4 620PS076ZR28B4 620PS076Z128B4No Bushing All 620PS076ME32 620PS076MT32 620PS076NF32 620PS076ZR32 620PS076Z13232-2 620PS076ME32B2 620PS076MT32B2 620PS076NF32B2 620PS076ZR32B2 620PS076Z132B2Bushing Included 32-3 620PS076ME32B3 620PS076MT32B3 620PS076NF32B3 620PS076ZR32B3 620PS076Z132B332-5 620PS076ME32B5 620PS076MT32B5 620PS076NF32B5 620PS076ZR32B5 620PS076Z132B5No Bushing All 620PS076ME36 620PS076MT36 620PS076NF36 620PS076ZR36 620PS076Z136Bushing Included 36-4 620PS076ME36B4 620PS076MT36B4 620PS076NF36B4 620PS076ZR36B4 620PS076Z136B4No Bushing All 620PS076ME40 620PS076MT40 620PS076NF40 620PS076ZR40 620PS076Z140Bushing Included 40-5 620PS076ME40B5 620PS076MT40B5 620PS076NF40B5 620PS076ZR40B5 620PS076Z140B5Hmaterial & finish selection guideAlum/ Nickel (ME)Alum/ Nickel-PTFE(MT)Alum/ Olive DrabCadmium (NF)Alum/ Black Zinc-Nickel (ZR)SST/ PassivateCorrosion Resistance Fair Excellent Excellent Excellent ExcellentTemperature Range -65°C to +200°C -65°C to +200°C -65°C to +175°C -65°C to +175°C -65°C to +200°CSalt Spray Hours 96 1000 1000 1000 2000Conductivity Excellent Excellent Good Good FairRelative Cost $$ $$$ $$ $$$ $$$$RoHS Compliant* Yes Yes No Yes Yes* Does not contain cadmium or hexavalent chromium. Meets EU requirements.© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com56E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesAccessories620PS076 Strain Relief ClampAccessories620PS076 STRAIN RELIEF CLAMPA THREADØ BEWIRESUPPORTBUSHING(OPTIONAL)Ø C(CLAMPCLOSED)FREFXDBCOUPLING NUT WITHANTI-DECOUPLINGMECHANISMØ .13 (3.3) DRAIN HOLE6 PLCSDimensionsShell Aø B Max.C± .031 (0.79) D Max. E Max. F Ref.Size Thread In. mm. In. mm. In. mm. In. mm. In. mm.18 1.125-18 UNEF-2B 1.39 35.3 .438 11.13 1.500 38.10 1.83 46.48 .63 16.020 1.250-18 UNEF-2B 1.53 38.9 .625 15.88 1.687 42.85 1.83 46.48 .63 16.024 1.4375-18 UNEF-2B 1.72 43.7 .688 17.48 1.921 48.79 2.03 51.56 .63 16.028 1.8125-16 UN-2B 2.13 54.1 .938 23.83 2.355 59.82 2.13 54.10 .63 16.032 2.0625-16 UNS-2B 2.35 59.7 1.062 26.97 2.716 68.99 2.53 64.26 .75 19.136 2.250-16 UN-2B 2.59 65.8 1.438 36.53 2.869 72.87 2.53 64.26 .75 19.140 2.500-16 UN-2B 2.87 70.6 1.438 36.53 3.066 77.88 2.53 64.26 .75 19.1bUSHINGDimensionsWire X Ref.Size In. mm.#8 AWG .217 5.51#4 AWG .331 8.41#1/0 AWG .500 12.70Xmaterials and finishesCoupling nut, clamp, saddle bars: aluminumor stainless steel. See How To Order formaterial & finish options.Anti-decoupling spring: high-temperaturethermoplasticWire support bushing: high-temperaturethermoplasticinstallation TorqueRecommendedShellSizeInstallation TorqueInch-Pounds ± 518 11620, 24 13628, 32, 36 14840 164H© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com57E-Mail: sales@glenair.com

AccessoriesSeries 970 PowerTrip Connectors and AccessoriesAccessories440-069 EMI/RFI Adapter440-069 EMI/rfi Adapter, Band-Master Shield TerminationSpin coupling EMI/RFI adapter with anti-decoupling ratchet prevents loosening undervibration. Fits standard Series 970 connectors. Terminate cable shield to backshell withBand-Master ATS (Advanced Termination System) stainless steel band. Optionalheatshrink boot provides strain relief and environmental seal. Backshell featuressplined connector interface for improved mechanical and electrical performance.materials and finishesAdapter: aluminum or stainless steel. SeeHow To Order for material & finish options.Anti-decoupling spring: high-gradeengineering thermoplassticinstallation TorqueRecommendedShellSizeInstallation TorqueInch-Pounds ± 518 11620, 24 13628, 32, 36 14840 164SeriesSHELL MATERIAL /FinishHow to OrderSHELLSizeCable ENTRYCodeLengthCodeOptioNALBandStrapOptioNALshrinkBootH440ps069Straight Exit440Ph06945° Exit440PJ06990° ExitMeAluminum / Electroless NickelRoHS CompliantNFAluminum / Cadmium withOlive Drab ChromateNFpAluminum / Cadmium withOlive Drab Chromate, NickelplatedShield TerminationArea, Polysulfide Barrier (SeeApplication Note)ZRAluminum / Zinc-Nickelwith Non-Reflective BlackChromateRoHS CompliantMTAluminum / Nickel-PTFERoHS CompliantZ1Stainless Steel / PassivatedRoHS Compliant18202428323640CABLEENTRYCable EntryCode In. mm.02 .250 6.403 .375 9.504 .500 12.705 .625 15.906 .750 19.107 .875 22.208 1.000 25.409 1.125 28.610 1.250 31.811 1.375 34.912 1.500 38.1Code13 1.625 41.314 1.750 44.515 1.875 47.616 2.000 50.817 2.125 54.018 2.250 57.219 2.375 60.320 2.500 63.5Sample Part Number440PH069 NF 24 07Omit for 45° and90° styles.The Length Codeis the length ofthe adapter in ½inch increments.Minimum lengthis 2 inches.LENGTHLengthIn. mm.-4 2.0 51-5 2.5 64-6 3.0 76-7 3.5 89-8 4.0 102-9 4.5 114-10 5.0 127-11 5.5 140-12 6.0 152-13 6.5 165-14 7.0 178-15 7.5 191-16 8.0 203KAdaptersupplied withpre-coiledstainlesssteel shieldterminationbandOmit ifbands will bepurchasedseparately.Refer toBand-Masterstrap andtool orderinginformation inthis catalog.tAdaptersupplied withstandardheatshrinkboot.SAdaptersupplied withlow-smoke,zero halogenheatshrinkboot.Omit ifboots will bepurchasedseparately.Refer toheatshrinkboot orderinginformation inthis catalog.© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com58E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesAccessories440-069 EMI/RFI AdapterAccessories440-069 EMI/RFI ADAPTER, BAND-MASTER SHIELD TERMINATIONShell A ø B Max. ø X Min.Size ThreadIn. mm. In. mm.18 1.125-18 UNEF-2B 1.39 35.3 .724 18.420 1.250-18 UNEF-2B 1.53 38.9 .858 21.824 1.4375-18 UNEF-2B 1.72 43.7 1.043 26.528 1.8125-16 UN-2B 2.13 54.1 1.353 34.432 2.0625-16 UNS-2B 2.35 59.7 1.620 41.236 2.250-16 UN-2B 2.59 65.8 1.823 46.340 2.500-16 UN-2B 2.87 70.6 2.050 52.1A THREADSPLINESLENGTH(CUSTOMER SPECIFIED).380 (9.65) TYP.075 (1.91) REF.140/.130 (3.56/3.30)ADAPTERCOUPLING NUT WITHANTI-DECOUPLINGMECHANISM.06 (1.5) TYPØ B Ø X Ø N Ø P Ø RKNURLED AREA FORSHIELD TERMINATIONBOOTGROOVEB45° AND 90° DIMENSIONS CABLE ENTRY DIMENSIONSCDØ N Ø P Ø REShell C Max. D Max. E Max. F Max.Size In. mm. In. mm. In. mm. In. mm.18 1.250 31.8 2.468 62.7 1.906 48.4 1.812 46.020 1.312 33.3 2.657 67.5 2.031 51.6 1.938 49.224 1.406 35.7 3.063 77.8 2.281 57.9 2.188 55.628 1.500 38.1 3.656 92.9 2.531 64.3 2.625 66.732 1.675 42.5 3.845 97.7 2.625 66.7 2.895 73.536 1.799 45.7 4.230 107.4 2.875 73.0 3.145 79.940 1.861 47.3 4.459 113.3 3.025 76.8 3.295 83.7FCableEntry 0N 0P 0R HeatshrinkCode In. mm. In. mm. In. mm. Boot Ref.*02 .250 6.4 .375 9.53 .437 11.10 770-003S11203 .375 9.5 .500 12.70 .562 14.27 770-001S10304 .500 12.7 .625 15.88 .687 17.45 770-001S10405 .625 15.9 .750 19.05 .812 20.62 770-001S10406 .750 19.1 .875 22.23 .937 23.80 770-001S10507 .875 22.2 1.000 25.40 1.062 26.97 770-001S10508 1.000 25.4 1.125 28.58 1.187 30.15 770-001S10609 1.125 28.6 1.250 31.75 1.312 33.32 770-001S10710 1.250 31.8 1.375 34.93 1.437 36.50 770-001S10711 1.375 34.9 1.500 38.10 1.562 39.67 770-001S10712 1.500 38.1 1.625 41.28 1.687 42.85 770-001S10813 1.625 41.3 1.750 44.45 1.812 46.02 770-001S10814 1.750 44.5 1.875 47.63 1.937 49.20 770-001S10815 1.875 47.6 2.000 50.80 2.062 52.37 770-001S10916 2.000 50.8 2.125 53.98 2.187 55.55 770-001S10917 2.125 54.0 2.250 57.15 2.313 58.75 770-003S11018 2.250 57.2 2.375 60.37 2.438 61.93 770-003S11019 2.375 60.3 2.500 63.50 2.563 65.10 770-003S11020 2.500 63.5 2.625 66.68 2.688 68.28 770-003S110* Heatshrink boot part number specifies standard material. For lowsmoke,zero halogen change “S1” to “S2”.H© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com59E-Mail: sales@glenair.com

AccessoriesSeries 970 PowerTrip Connectors and AccessoriesAccessories440-069 EMI/RFI Adapteralternate configuration for large cablesIf the cable entry diameter exceeds thediameter of the backshell shown in the tableat right, the backshell will be supplied with atransition adapter. The clamp and adaptersare first installed over the cable jacket, andthen are threaded onto the transition adapter.On straight exit backshells, the transitionadapter does not affect the length. On 45° and90° versions the transition adapter adds 1.00 inch(25.4mm) maximum to the backshell length.BackshellInsideShell DiameterSize In. mm.18 .72 18.320 .85 21.724 1.04 26.428 1.35 34.332 1.62 41.136 1.82 46.340 2.05 52.0SELF-LOCKINGCOUPLING NUTSTRANSITIONADAPTERBACKSHELLAPPLICATION NOTE: POLYSULFIDE BARRIER FOR GALVANIC CORROSION PROTECTIONOlive drab (OD) cadmium (Cd) over electrolessnickel (EN) is available in two versions. Thestandard version, designated as Glenair codeNF, is a uniform Cd/EN finish over the entirepart. A second version, designated as Glenaircode NFP, is selectively plated with electrolessnickel in the knurled shield attachment area.A polysulfide barrier separates the electrolessnickel area from the cadmium plated area. Thisselectively plated version prevents galvaniccorrosion that could potentially occur if nickelcoatedshield braid is attached to a cadmiumplated surface.The Polysulfide ProcessFirst, the part is plated with electrolessnickel. Next, a tape mask is applied to theshield termination area. Following cadmiumplating and chromate conversion coating,the tape is removed, exposing the electrolessnickel. Polysulfide is applied with a brush tocompletely seal the transition area betweenthe nickel and cadmium. The final step is tooven cure the polysulfide.POLYSULFIDEBARRIERELECTROLESSNICKELOLIVE DRABCADMIUMH© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com60E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesAccessories370-024 Submersible BackshellAccessoriesSubmersible backshellHeavy duty backshell features positive detent self-locking spin coupling for high vibrationenvironments. For use with unshielded, jacketed power cable. Splined connectorinterface. Heavy duty cable clamps fit most cable sizes, or choose wire mesh stainlesssteel cordgrip. Withstands six feet water immersion for 48 hours. Aluminum or stainlesssteel with silicone gland. Stainless steel telescoping clamp screws. Meets environmental,electrical and mechanical requirements of AS85049 Category 1A Heavy Duty.materials and finishesAdapters, elbows, follower, coupling nut:aluminum or stainless steel. See How ToOrder for material & finish options.Hardware: stainless steelWire Mesh Cordgrip: stainless steelScrews: stainless steellGrommet, O-rings: fluorosiliconeinstallation TorqueRecommendedShellSizeInstallation TorqueInch-Pounds ± 518 11620, 24 13628, 32, 36 14840 164BSeries370PS024Straight ExitGLENAIR 12370PM02445° ExitGLENAIR 12370PN02490° ExitGLENAIR 12SHELL MATERIAL /FinishMeAluminum / ElectrolessNickelRoHS CompliantNFAluminum / Cadmium withOlive Drab ChromateZRAluminum / Zinc-Nickelwith Non-Reflective BlackChromateRoHS CompliantMTAluminum / Nickel-PTFERoHS CompliantZ1Stainless Steel /PassivatedRoHS CompliantHow to OrderSHELLCable ENTRY CodeSize18202428323640GLENAIR 12SaddleClampWire MeshCordgripCable DiameterMin. Max.Code In. mm. In. mm.06H .250 6.4 .437 11.108H .387 9.8 .562 14.310H .350 8.9 .625 15.912H .500 12.7 .750 19.116H .625 15.9 .937 23.820H .875 22.2 1.250 31.824H 1.000 25.4 1.375 34.928H 1.250 31.8 1.625 41.332H 1.437 36.5 1.875 47.636H 1.625 41.3 2.125 54.040H 1.875 47.6 2.375 60.3Cable DiameterMin. Max.Code In. mm. In. mm.06K .310 7.8 .438 11.108K .438 11.1 .500 12.710K .500 12.7 .625 15.812K .625 15.9 .750 19.114K .750 19.1 .875 22.216K .875 22.2 1.000 25.420K 1.000 25.4 1.250 31.824K 1.125 28.6 1.375 34.928K 1.375 34.9 1.625 41.232K 1.625 41.3 1.875 47.640K 2.125 53.9 2.375 60.3Length Code(Omit for 45° and90° styles. Applies to370PS024 straightexit only)The Length Code isthe length of theadapter in ½ inchincrementsLengthCode In. mm.6 3.0 767 3.5 898 4.0 1029 4.5 11410 5.0 12711 5.5 14012 6.0 15213 6.5 16514 7.0 17815 7.5 19116 8.0 203Sample Part Number370PS024 mt 32 20H 10LENGTHH© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com61E-Mail: sales@glenair.com

AccessoriesSeries 970 PowerTrip Connectors and AccessoriesAccessories370-024 Submersible BackshellSubmersible backSHELL: 370PS024 STRAIGHT ExITShell A ø B Max.Size ThreadIn. mm.18 1.125-18 UNEF-2B 1.39 35.320 1.250-18 UNEF-2B 1.53 38.924 1.4375-18 UNEF-2B 1.72 43.728 1.8125-16 UN-2B 2.13 54.132 2.0625-16 UNS-2B 2.35 59.736 2.250-16 UN-2B 2.59 65.840 2.500-16 UN-2B 2.87 70.6Ø BA THREADSPLINEDCONNECTORINTERFACEADAPTERLENGTH(CUSTOMER SPECIFIED)SILICONEGLANDGLENAIR 12FOLLOWERCABLECLAMPCOUPLING NUT WITHANTI-DECOUPLING MECHANISM370PM024 45° Exit dimensions370PN024 90° ExITA THREADCA THREADEDØ BØ BFGLENAIR 12GLENAIR 12HShell A Thread ø B Max. C Max. D Max.Size Class 2B In. mm. In. mm. In. mm.18 1.125-18 UNEF 1.39 35.3 1.250 31.8 2.468 62.720 1.250-18 UNEF 1.53 38.9 1.312 33.3 2.657 67.524 1.4375-18 UNEF 1.72 43.7 1.406 35.7 3.063 77.828 1.8125-16 UN 2.13 54.1 1.500 38.1 3.656 92.932 2.0625-16 UNS 2.35 59.7 1.675 42.5 3.845 97.736 2.250-16 UN 2.59 65.8 1.799 45.7 4.230 107.440 2.500-16 UN 2.87 70.6 1.861 47.3 4.459 113.3Shell A Thread ø B Max. E Max. F Max.Size Class 2B In. mm. In. mm. In. mm.18 1.125-18 UNEF 1.39 35.3 1.906 48.4 1.812 46.020 1.250-18 UNEF 1.53 38.9 2.031 51.6 1.938 49.224 1.4375-18 UNEF 1.72 43.7 2.281 57.9 2.188 55.628 1.8125-16 UN 2.13 54.1 2.531 64.3 2.625 66.732 2.0625-16 UNS 2.35 59.7 2.625 66.7 2.895 73.536 2.250-16 UN 2.59 65.8 2.875 73.0 3.145 79.940 2.500-16 UN 2.87 70.6 3.025 76.8 3.295 83.7© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com62E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesAccessories370-024 Submersible BackshellAccessoriesSADDLE CLAMP DIMENSIONSHOLES FOR .020 (0.5)SAFETY WIREATHREADBwire mesh grip DIMENSIONSBAPPROXLENGTH ATMAX GRIPDIAØ AFIL. HD.TELESCOPINGSCREW 2 PLCSCABLERANGECCable RangeClamp Min. Max. A Thread B Max. C Max.Size In. mm. In. mm. Class 2B In. mm. In. mm.06H .250 6.4 .437 11.1 .750-20UNEF 1.301 33.04 1.145 29.108H .387 9.8 .562 14.3 .875-20UNEF 1.301 33.04 1.332 33.810H .350 8.9 .625 15.9 1.000-20UNEF 1.301 33.04 1.332 33.812H .500 12.7 .750 19.1 1.1875-18UNEF 1.332 33.83 1.551 39.416H .625 15.9 .937 23.8 1.4375-18UNEF 1.426 36.22 1.770 45.020H .875 22.2 1.250 31.8 1.750-18UNS 1.613 40.97 2.113 53.724H 1.000 25.4 1.375 34.9 2.000-18UNS 1.645 41.78 2.363 60.028H 1.250 31.8 1.625 41.3 2.250-16UN 1.920 48.77 2.770 70.432H 1.437 36.5 1.875 47.6 2.500-16UN 1.920 48.77 3.020 76.736H 1.625 41.3 2.125 54.0 2.750-16UN 2.060 53.32 3.250 82.640H 1.875 47.6 2.375 60.3 3.000-16UN 2.060 53.32 3.500 88.9Cable RangeBGrip Min. Max. ø A Max. Approx.Size In. mm. In. mm. In. mm. In. mm.06K .310 7.8 .438 11.1 .942 23.9 4.000 10108K .438 11.1 .500 12.7 1.067 27.1 4.120 10510K .500 12.7 .625 15.8 1.192 30.3 4.370 11112K .625 15.9 .750 19.1 1.380 35.1 5.000 12714K .750 19.1 .875 22.2 1.563 39.7 6.000 15216K .875 22.2 1.000 25.4 1.563 39.7 6.250 15820K 1.000 25.4 1.250 31.8 1.875 47.6 7.250 18424K 1.125 28.6 1.375 34.9 2.225 57.3 8.000 20328K 1.375 34.9 1.625 41.2 2.505 63.6 8.500 21632K 1.625 41.3 1.875 47.6 2.755 70.0 9.000 22940K 2.125 53.9 2.375 60.3 3.225 82.7 9.500 241Balternate configuration for large cablesIf the cable range exceeds the inside diameterof the backshell shown in the table at right, thebackshell will be supplied with a transitionadapter and a second coupling nut. This styleof backshell is called a Style 2. The transitionadapter attaches to the connector. Thebackshell and clamp fit over the cable jacket.On straight exit backshells, the transitionadapter does not affect the length. On 45°and 90° versions the transition adapter adds1.00 inch (25.4mm) maximum to the backshelllength.BackshellInsideShell DiameterSize In. mm.18 .72 18.320 .85 21.724 1.04 26.428 1.35 34.332 1.62 41.136 1.82 46.340 2.05 52.0CONNECTORSELF-LOCKINGCOUPLING NUTSTRANSITIONADAPTERGLENAIRBACKSHELLCLAMPH© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com63E-Mail: sales@glenair.com

AccessoriesSeries 970 PowerTrip Connectors and AccessoriesAccessories380-105 EMI/RFI Backshell (Non-Environmental)380p*105 emi/rfi backshellEMI/RFI backshell features ground rings for cable braid shield termination. Spincoupling with anti-decoupling ratchet . Splined connector interface. Heavy duty saddleclamp. Aluminum or stainless steel. Stainless steel telescoping clamp screws. Meetsenvironmental, electrical and mechanical requirements of AS85049 Category 3A HeavyDuty. Assembly procedure conforms to Glenair Type F shield terminations.SeriesSHELL MATERIAL /Finishmaterials and finishesAdapters, crimp rings, follower, coupling nut:aluminum or stainless steel. See How ToOrder for finish options.Hardware: stainless steelHow to OrderSHELLStrain Relief CodeSizeinstallation TorqueRecommendedShellSizeInstallation TorqueInch-Pounds ± 518 11620, 24 13628, 32, 36 14840 164Length Code380PS105Straight ExitGLENAIR 12380PM10545° ExitGLENAIR380PN10590° ExitMeAluminum / ElectrolessNickelRoHS CompliantNFAluminum / Cadmium withOlive Drab ChromateZRAluminum / Zinc-Nickelwith Non-Reflective BlackChromateRoHS CompliantMTAluminum / Nickel-PTFERoHS CompliantZ1Stainless Steel /PassivatedRoHS Compliant18202428323640GLENAIR 12Saddle ClampCable DiameterMin. Max.Code In. mm. In. mm.06H .250 6.4 .437 11.108H .312 7.9 .562 14.310H .350 8.9 .625 15.912H .500 12.7 .750 19.116H .625 15.9 .937 23.820H .875 22.2 1.250 31.824H 1.000 25.4 1.375 34.928H 1.250 31.8 1.625 41.332H 1.437 36.5 1.875 47.6(Omit for 45° and 90° styles.Applies to 380PS105 straightexit only)The Length Code is the lengthof the adapter in ½ inchincrementsLengthCode In. mm.6 3.0 767 3.5 898 4.0 1029 4.5 11410 5.0 12711 5.5 14012 6.0 15213 6.5 16514 7.0 17815 7.5 19116 8.0 203LENGTHHGLENAIRSample Part Number380PS105 ZR 24 12H 8© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com64E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesAccessories380-105 EMI/RFI Backshell (Non-Environmental)Accessories380PS105 STRAIGHT ExIT EMI/RFI BACkSHELLShell A ø B Max.Size ThreadIn. mm.18 1.125-18 UNEF-2B 1.39 35.320 1.250-18 UNEF-2B 1.53 38.924 1.4375-18 UNEF-2B 1.72 43.728 1.8125-16 UN-2B 2.13 54.132 2.0625-16 UNS-2B 2.35 59.736 2.250-16 UN-2B 2.59 65.840 2.500-16 UN-2B 2.87 70.6Ø BA THREADSPLINEDCONNECTORINTERFACERFIFERRULE,INNERLENGTH(CUSTOMERSPECIFIED)RFI FERRULE,OUTERCABLECLAMPGLENAIR 12BCOUPLING NUT WITHANTI-DECOUPLING MECHANISM380PM105 45° ExIT DIMENSIONS380PN105 90° ExITA THREADCA THREADEDØ BØ BGLENAIR 12FGLENAIR 12Shell A Thread ø B Max. C Max. D Max.Size Class 2B In. mm. In. mm. In. mm.18 1.125-18 UNEF 1.39 35.3 1.250 31.8 1.156 29.420 1.250-18 UNEF 1.53 38.9 1.312 33.3 1.219 31.024 1.4375-18 UNEF 1.72 43.7 1.406 35.7 1.312 33.328 1.8125-16 UN 2.13 54.1 1.500 38.1 1.625 41.332 2.0625-16 UNS 2.35 59.7 1.675 42.5 1.945 49.436 2.250-16 UN 2.59 65.8 1.799 45.7 2.069 52.640 2.500-16 UN 2.87 70.6 1.861 47.3 2.131 54.1Shell A Thread ø B Max. E Max. F Max.Size Class 2B In. mm. In. mm. In. mm.18 1.125-18 UNEF 1.39 35.3 1.906 48.4 1.812 46.020 1.250-18 UNEF 1.53 38.9 2.031 51.6 1.938 49.224 1.4375-18 UNEF 1.72 43.7 2.281 57.9 2.188 55.628 1.8125-16 UN 2.13 54.1 2.531 64.3 2.625 66.732 2.0625-16 UNS 2.35 59.7 2.625 66.7 2.895 73.536 2.250-16 UN 2.59 65.8 2.875 73.0 3.145 79.940 2.500-16 UN 2.87 70.6 3.025 76.8 3.295 83.7H© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com65E-Mail: sales@glenair.com

AccessoriesAccessories380P*105 EMI/RFI Backshell (Non-Environmental)SADDLE CLAMP DIMENSIONSHOLES FOR .020 (0.5)SAFETY WIREATHREADBFIL. HD.TELESCOPINGSCREW 2 PLCSCABLERANGECCable RangeClamp Min. Max. A Thread B Max. C Max.Size In. mm. In. mm. Class 2B In. mm. In. mm.06H .250 6.4 .437 11.1 .750-20UNEF 1.301 33.04 1.145 29.108H .312 7.9 .562 14.3 .875-20UNEF 1.301 33.04 1.332 33.810H .350 8.9 .625 15.9 1.000-20UNEF 1.301 33.04 1.332 33.812H .500 12.7 .750 19.1 1.1875-18UNEF 1.332 33.83 1.551 39.416H .625 15.9 .937 23.8 1.4375-18UNEF 1.426 36.22 1.770 45.020H .875 22.2 1.250 31.8 1.750-18UNS 1.613 40.97 2.113 53.724H 1.000 25.4 1.375 34.9 2.000-18UNS 1.645 41.78 2.363 60.028H 1.250 31.8 1.625 41.3 2.250-16UN 1.920 48.77 2.770 70.432H 1.437 36.5 1.875 47.6 2.500-16UN 1.920 48.77 3.020 76.7alternate configuration for large cablesIf the cable range exceeds the inside diameterof the backshell shown in the table at right, thebackshell will be supplied with a transitionadapter and a second coupling nut. This styleof backshell is called a Style 2. The transitionadapter attaches to the connector. Thebackshell and clamp fit over the cable jacket.On straight exit backshells, the transition adapterdoes not affect the length. On 45° and 90°versions the transition adapter adds 1.00 inch(25.4mm) maximum to the backshell length.BackshellInsideShell DiameterSize In. mm.18 .72 18.320 .85 21.724 1.04 26.428 1.35 34.332 1.62 41.136 1.82 46.340 2.05 52.0CONNECTORSELF-LOCKINGCOUPLING NUTSTRANSITIONADAPTERGLENAIRBACKSHELLCLAMPH© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com66E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesAccessories390-055 EMI/RFI Submersible BackshellAccessoriesSubmersible emi backshellHeavy duty backshell features positive detent self-locking spin coupling for highvibration environments. For use with shielded, jacketed power cable. Splined connectorinterface. Terminate cable shield to inner and outer ground rings. Heavy duty cableclamps fit most cable sizes, or choose wire mesh stainless steel cordgrip. Withstandssix feet water immersion for 48 hours. Aluminum or stainless steel with silicone O-ringsand gland. Stainless steel telescoping clamp screws. Meets environmental, electricaland mechanical requirements of AS85049 Category 1A Heavy Duty.materials and finishes installation TorqueAdapters, elbows, follower, coupling nut:aluminum or stainless steel. See How ToOrder for material & finish options.Hardware: stainless steelWire Mesh Cordgrip: stainless steelScrews: stainless steellGrommet, O-rings: fluorosiliconeHow to OrderRecommendedShellSizeInstallation TorqueInch-Pounds ± 518 11620, 24 13628, 32, 36 14840 164BSeriesSHELL MATERIAL /FinishSHELLSizeStrain Relief TYPE AND SizeLengthCode390PS055Straight ExitGLENAIR 12390PM05545° ExitGLENAIR 12390PN05590° ExitGLENAIR 12MeAluminum / ElectrolessNickelRoHS CompliantNFAluminum / Cadmiumwith Olive DrabChromateZRAluminum / Zinc-Nickelwith Non-ReflectiveBlack ChromateRoHS CompliantMTAluminum / Nickel-PTFERoHS CompliantZ1Stainless Steel /PassivatedRoHS Compliant18202428323640Heavy DutySaddle ClampGLENAIR 12Wire MeshCordgripCable DiameterMin. Max.Code In. mm. In. mm.06H .250 6.4 .437 11.108H .387 9.8 .562 14.310H .350 8.9 .625 15.912H .500 12.7 .750 19.116H .625 15.9 .937 23.820H .875 22.2 1.250 31.824H 1.000 25.4 1.375 34.928H 1.250 31.8 1.625 41.332H 1.437 36.5 1.875 47.636H 1.625 41.3 2.125 54.040H 1.875 47.6 2.375 60.3Cable DiameterMin. Max.Code In. mm. In. mm.06K .310 7.8 .438 11.108K .438 11.1 .500 12.710K .500 12.7 .625 15.812K .625 15.9 .750 19.114K .750 19.1 .875 22.216K .875 22.2 1.000 25.420K 1.000 25.4 1.250 31.824K 1.125 28.6 1.375 34.928K 1.375 34.9 1.625 41.232K 1.625 41.3 1.875 47.640K 2.125 53.9 2.375 60.3Omit for 45° and90° styles. TheLength Code is thelength of the frontadapter in ½ inchincrementsLengthCode In. mm.6 3.0 767 3.5 898 4.0 1029 4.5 11410 5.0 12711 5.5 14012 6.0 15213 6.5 16514 7.0 17815 7.5 19116 8.0 203Sample Part Number390PS055 ME 20 08K 9LENGTHH© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com67E-Mail: sales@glenair.com

AccessoriesSeries 970 PowerTrip Connectors and AccessoriesAccessories390-055 EMI/RFI Submersible Backshell390PS055 STRAIGHT ExitShell A ø B Max.Size ThreadIn. mm.18 1.125-18 UNEF-2B 1.39 35.320 1.250-18 UNEF-2B 1.53 38.924 1.4375-18 UNEF-2B 1.72 43.728 1.8125-16 UN-2B 2.13 54.132 2.0625-16 UNS-2B 2.35 59.736 2.250-16 UN-2B 2.59 65.840 2.500-16 UN-2B 2.87 70.6Ø BA THREADSPLINEDRFICONNECTORFERRULE,INTERFACEINNERSILICONEO-RINGFRONTADAPTERLENGTH(CUSTOMER SPECIFIED)COUPLING NUT WITHANTI-DECOUPLING MECHANISMRFI FERRULE,OUTER1.28(32.5)REARADAPTERSILICONEGLANDGLENAIR 12FOLLOWERCABLECLAMP390PM055 45° Exit390PN055 90° ExITA THREADEA THREADCØ BDØ BFGLENAIR 12GLENAIR 12HShell A Thread ø B Max. C Max. D Max.Size Class 2B In. mm. In. mm. In. mm.18 1.125-18 UNEF 1.39 35.3 1.250 31.8 2.468 62.720 1.250-18 UNEF 1.53 38.9 1.312 33.3 2.657 67.524 1.4375-18 UNEF 1.72 43.7 1.406 35.7 3.063 77.828 1.8125-16 UN 2.13 54.1 1.500 38.1 3.656 92.932 2.0625-16 UNS 2.35 59.7 1.675 42.5 3.845 97.736 2.250-16 UN 2.59 65.8 1.799 45.7 4.230 107.440 2.500-16 UN 2.87 70.6 1.861 47.3 4.459 113.3Shell A Thread ø B Max. E Max. F Max.Size Class 2B In. mm. In. mm. In. mm.18 1.125-18 UNEF 1.39 35.3 1.906 48.4 1.812 46.020 1.250-18 UNEF 1.53 38.9 2.031 51.6 1.938 49.224 1.4375-18 UNEF 1.72 43.7 2.281 57.9 2.188 55.628 1.8125-16 UN 2.13 54.1 2.531 64.3 2.625 66.732 2.0625-16 UNS 2.35 59.7 2.625 66.7 2.895 73.536 2.250-16 UN 2.59 65.8 2.875 73.0 3.145 79.940 2.500-16 UN 2.87 70.6 3.025 76.8 3.295 83.7© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com68E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesAccessories390-055 EMI/RFI Submersible BackshellAccessoriesSADDLE CLAMP DIMENSIONSHOLES FOR .020 (0.5)SAFETY WIREATHREADBFIL. HD.TELESCOPINGSCREW 2 PLCSCABLERANGECCable RangeClamp Min. Max. A Thread B Max. C Max.Size In. mm. In. mm. Class 2B In. mm. In. mm.06H .250 6.4 .437 11.1 .750-20UNEF 1.301 33.04 1.145 29.108H .387 9.8 .562 14.3 .875-20UNEF 1.301 33.04 1.332 33.810H .350 8.9 .625 15.9 1.000-20UNEF 1.301 33.04 1.332 33.812H .500 12.7 .750 19.1 1.1875-18UNEF 1.332 33.83 1.551 39.416H .625 15.9 .937 23.8 1.4375-18UNEF 1.426 36.22 1.770 45.020H .875 22.2 1.250 31.8 1.750-18UNS 1.613 40.97 2.113 53.724H 1.000 25.4 1.375 34.9 2.000-18UNS 1.645 41.78 2.363 60.028H 1.250 31.8 1.625 41.3 2.250-16UN 1.920 48.77 2.770 70.432H 1.437 36.5 1.875 47.6 2.500-16UN 1.920 48.77 3.020 76.736H 1.625 41.3 2.125 54.0 2.750-16UN 2.060 53.32 3.250 82.640H 1.875 47.6 2.375 60.3 3.000-16UN 2.060 53.32 3.500 88.9Bwire mesh grip DIMENSIONSBAPPROXLENGTH ATMAX GRIPDIAØ ACable RangeBGrip Min. Max. ø A Max. Approx.Size In. mm. In. mm. In. mm. In. mm.06K .310 7.8 .438 11.1 .942 23.9 4.000 10108K .438 11.1 .500 12.7 1.067 27.1 4.120 10510K .500 12.7 .625 15.8 1.192 30.3 4.370 11112K .625 15.9 .750 19.1 1.380 35.1 5.000 12714K .750 19.1 .875 22.2 1.563 39.7 6.000 15216K .875 22.2 1.000 25.4 1.563 39.7 6.250 15820K 1.000 25.4 1.250 31.8 1.875 47.6 7.250 18424K 1.125 28.6 1.375 34.9 2.225 57.3 8.000 20328K 1.375 34.9 1.625 41.2 2.505 63.6 8.500 21632K 1.625 41.3 1.875 47.6 2.755 70.0 9.000 22940K 2.125 53.9 2.375 60.3 3.225 82.7 9.500 241alternate configuration for large cablesIf the cable diameter exceeds the diameter ofthe backshell shown in the table at right, thebackshell will be supplied with a transitionadapter. The clamp and adapters are firstinstalled over the cable jacket, and then arethreaded onto the transition adapter.On straight exit backshells, the transitionadapter does not affect the length. On 45°and 90° versions the transition adapter adds1.00 inch (25.4mm) maximum to the backshelllength.BackshellInsideShell DiameterSize In. mm.18 .72 18.320 .85 21.724 1.04 26.428 1.35 34.332 1.62 41.136 1.82 46.340 2.05 52.0SELF-LOCKINGCOUPLING NUTSTRANSITIONADAPTERREARADAPTERINTERMEDIATEADAPTERGLENAIRCLAMPH© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com69E-Mail: sales@glenair.com

AccessoriesSeries 970 PowerTrip Connectors and AccessoriesAccessories390PS086 EMI/RFI Submersible Backshell390ps086 Submersible Heavy duty backshell with wire mesh cordgripHeavy duty backshell fits Series 970 connectors and withstands MIL-S-901 grade A high impactshock. Splined connector interface. Terminate cable shield to inner and outer ground rings.Stainless steel wire mesh cordgrip provides strain relief to heavy duty power cables. Withstandssix feet water immersion for 48 hours. Aluminum or stainless steel with silicone O-ringsand cable gland. Meets environmental, electrical and mechanical requirements ofMIL-DTL-28840.materials and finishesAdapters, crimp rings, follower, coupling nut:aluminum or stainless steel. See table forfinish options.Hardware: stainless steelCable sealing gland, O-rings: siliconeWire mesh cordgrip: stainless steelinstallation TorqueRecommendedShellSizeInstallation TorqueInch-Pounds ± 518 11620, 24 13628, 32, 36 14840 164HShellSize18202428323640Cable RangeMin. Max.In. mm. In. mm.Aluminum/NICKELHow To OrderAluminum/Nickel-PTFEAluminum/OD CadmiumAluminum/Black Zinc-NickelSTAINLESSSteel/PASSIVATED.500 12.70 .625 15.88 390PS086ME1810 390PS086MT1810 390PS086NF1810 390PS086ZR1810 390PS086Z11810.625 15.88 .750 19.05 390PS086ME1812 390PS086MT1812 390PS086NF1812 390PS086ZR1812 390PS086Z11812.750 19.05 .875 22.23 390PS086ME1814 390PS086MT1814 390PS086NF1814 390PS086ZR1814 390PS086Z11814.500 12.70 .625 15.88 390PS086ME2010 390PS086MT2010 390PS086NF2010 390PS086ZR2010 390PS086Z12010.625 15.88 .750 19.05 390PS086ME2012 390PS086MT2012 390PS086NF2012 390PS086ZR2012 390PS086Z12012.750 19.05 .875 22.23 390PS086ME2014 390PS086MT2014 390PS086NF2014 390PS086ZR2014 390PS086Z12014.625 15.88 .750 19.05 390PS086ME2412 390PS086MT2412 390PS086NF2412 390PS086ZR2412 390PS086Z12412.750 19.05 .875 22.23 390PS086ME2414 390PS086MT2414 390PS086NF2414 390PS086ZR2414 390PS086Z124141.000 25.40 1.250 31.75 390PS086ME2420 390PS086MT2420 390PS086NF2420 390PS086ZR2420 390PS086Z12420.750 19.05 .875 22.23 390PS086ME2814 390PS086MT2814 390PS086NF2814 390PS086ZR2814 390PS086Z128141.000 25.40 1.250 31.75 390PS086ME2820 390PS086MT2820 390PS086NF2820 390PS086ZR2820 390PS086Z128201.125 28.58 1.375 34.93 390PS086ME2824 390PS086MT2824 390PS086NF2824 390PS086ZR2824 390PS086Z128241.125 28.58 1.375 34.93 390PS086ME3224 390PS086MT3224 390PS086NF3224 390PS086ZR3224 390PS086Z132241.375 34.93 1.625 41.28 390PS086ME3228 390PS086MT3228 390PS086NF3228 390PS086ZR3228 390PS086Z132281.625 41.28 1.875 47.63 390PS086ME3232 390PS086MT3232 390PS086NF3232 390PS086ZR3232 390PS086Z132321.125 28.58 1.375 34.93 390PS086ME3624 390PS086MT3624 390PS086NF3624 390PS086ZR3624 390PS086Z136241.375 34.93 1.625 41.28 390PS086ME3628 390PS086MT3628 390PS086NF3628 390PS086ZR3628 390PS086Z136281.625 41.28 1.875 47.63 390PS086ME3632 390PS086MT3632 390PS086NF3632 390PS086ZR3632 390PS086Z136322.125 53.98 2.375 60.33 390PS086ME3640 390PS086MT3640 390PS086NF3640 390PS086ZR3640 390PS086Z136401.125 28.58 1.375 34.93 390PS086ME4024 390PS086MT4024 390PS086NF4024 390PS086ZR4024 390PS086Z140241.375 34.93 1.625 41.28 390PS086ME4028 390PS086MT4028 390PS086NF4028 390PS086ZR4028 390PS086Z140281.625 41.28 1.875 47.63 390PS086ME4032 390PS086MT4032 390PS086NF4032 390PS086ZR4032 390PS086Z140322.125 53.98 2.375 60.33 390PS086ME4040 390PS086MT4040 390PS086NF4040 390PS086ZR4040 390PS086Z14040© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com70E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesAccessories390PS086 EMI/RFI Submersible BackshellAccessories390PS086 BACKSHELL WITH WIRE MESH CORD GRIPA THREADLASSEMBLEDLENGTHWORKINGROOMSILICONEO-RINGØ C Ø DRFIRING,FRONT.63 (16.0)SILICONEGLANDNUTXBØ BFRONTADAPTERREARADAPTERCOUPLING NUT WITHANTI-DECOUPLING MECHANISMØ YFOLLOWERRFI RING,REARWIRE MESHCORDGRIPShellSize18202428323640Cable Range L Length Working AMin. Max. ±.12 (3.0) Room Thread 0B Max. 0C Max. 0D Min. X Ref. Y Max.In. mm. In. mm. In. mm. In. mm. Class 2B In. mm. In. mm. In. mm. In. mm. In. mm..500 12.70 .625 15.88 4.62 117.4 3.00 76.2 1.125-18 UNEF 1.44 36.6 1.406 35.71 1.000 25.40 4.37 111.0 1.16 29.5.625 15.88 .750 19.05 4.62 117.4 3.00 76.2 1.125-18 UNEF 1.44 36.6 1.406 35.71 1.000 25.40 5.00 127.0 1.34 34.0.750 19.05 .875 22.23 4.62 117.4 3.00 76.2 1.125-18 UNEF 1.44 36.6 1.531 38.89 1.125 28.58 5.00 127.0 1.59 40.4.500 12.70 .625 15.88 4.62 117.4 3.00 76.2 1.250-18 UNEF 1.54 39.1 1.531 38.89 1.125 28.58 4.37 111.0 1.16 29.5.625 15.88 .750 19.05 4.62 117.4 3.00 76.2 1.250-18 UNEF 1.54 39.1 1.531 38.89 1.125 28.58 6.00 152.4 1.34 34.0.750 19.05 .875 22.23 4.62 117.4 3.00 76.2 1.250-18 UNEF 1.54 39.1 1.656 42.06 1.250 31.75 5.00 127.0 1.59 40.4.625 15.88 .750 19.05 5.12 130.1 3.50 88.9 1.438-18 UNEF 1.73 43.9 1.656 42.06 1.250 31.75 6.00 152.4 1.34 34.0.750 19.05 .875 22.23 5.12 130.1 3.50 88.9 1.438-18 UNEF 1.73 43.9 1.781 45.24 1.375 34.93 5.00 127.0 1.59 40.41.000 25.40 1.250 31.75 5.12 130.1 3.50 88.9 1.438-18 UNEF 1.73 43.9 1.781 45.24 1.375 34.93 6.25 158.8 1.94 49.3.750 19.05 .875 22.23 5.12 130.1 3.50 88.9 1.812-16 UN 2.14 54.4 2.156 54.76 1.750 44.45 5.00 127.0 1.59 40.41.000 25.40 1.250 31.75 5.12 130.1 3.50 88.9 1.812-16 UN 2.14 54.4 2.156 54.76 1.750 44.45 6.25 158.8 1.94 49.31.125 28.58 1.375 34.93 5.12 130.1 3.50 88.9 1.812-16 UN 2.14 54.4 2.156 54.76 1.750 44.45 7.25 184.2 2.19 55.61.125 28.58 1.375 34.93 5.12 130.1 3.50 88.9 2.062-16 UNS 2.37 60.2 2.281 57.94 1.875 47.63 7.25 184.2 2.19 55.61.375 34.93 1.625 41.28 6.12 155.5 4.50 114.3 2.062-16 UNS 2.37 60.2 2.281 57.94 1.875 47.63 8.00 203.2 2.43 61.71.625 41.28 1.875 47.63 6.12 155.5 4.50 114.3 2.062-16 UNS 2.37 60.2 2.281 57.94 1.875 47.63 10.00 254.0 2.69 68.31.125 28.58 1.375 34.93 6.12 155.5 4.50 114.3 2.250-16 UN 2.63 66.8 2.531 64.29 2.125 53.98 7.25 184.2 2.19 55.61.375 34.93 1.625 41.28 6.12 155.5 4.50 114.3 2.250-16 UN 2.63 66.8 2.531 64.29 2.125 53.98 8.00 203.2 2.43 61.71.625 41.28 1.875 47.63 6.12 155.5 4.50 114.3 2.250-16 UN 2.63 66.8 2.531 64.29 2.125 53.98 10.00 254.0 2.69 68.32.125 53.98 2.375 60.33 6.62 168.2 5.00 127.0 2.250-16 UN 2.63 66.8 3.031 76.99 2.625 66.68 12.60 320.0 3.19 81.01.125 28.58 1.375 34.93 6.12 155.5 4.50 114.3 2.500-16 UN 2.93 74.4 2.781 70.64 2.375 60.33 7.25 184.2 2.19 55.61.375 34.93 1.625 41.28 6.12 155.5 4.50 114.3 2.500-16 UN 2.93 74.4 2.781 70.64 2.375 60.33 8.00 203.2 2.43 61.71.625 41.28 1.875 47.63 6.12 155.5 4.50 114.3 2.500-16 UN 2.93 74.4 2.781 70.64 2.375 60.33 10.00 254.0 2.69 68.32.125 53.98 2.375 60.33 6.62 168.2 5.00 127.0 2.500-16 UN 2.93 74.4 3.031 76.99 2.625 66.68 12.60 320.0 3.19 81.0H© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com71E-Mail: sales@glenair.com

AccessoriesSeries 970 PowerTrip Connectors and AccessoriesAccessories390PS036 EMI/RFI Submersible Backshell390PS036 submersible emi/rfi backshell with saddle bar cable clampHeavy duty backshell fits Series 970 connectors and withstands MIL-S-901 grade A high impactshock. Splined connector interface. Terminate cable shield to inner and outer ground rings. Heavyduty saddle bar cable clamp with telescoping stainless steel screws, lockwashers and lockwireholes. Meets AS85049/42 Class 1A requirements. Withstands six feet water immersion for48 hours. Aluminum or stainless steel with silicone O-rings and cable gland. Meetsenvironmental, electrical and mechanical requirements of MIL-DTL-28840.materials and finishesAdapters, crimp rings, follower, coupling nut,cable clamp: aluminum or stainless steel.See Ordering Information for finish options.Hardware: stainless steelCable sealing gland, O-rings: siliconeWire mesh cordgrip: stainless steelinstallation TorqueRecommendedShellSizeInstallation TorqueInch-Pounds ± 518 11620, 24 13628, 32, 36 14840 164HShellSize18202428323640How To OrderCable RangeAluminum/ STAINLESSAluminum/ Aluminum/ Aluminum/Min. Max.Black Zinc- Steel/NICKEL Nickel-PTFE OD CadmiumIn. mm. In. mm.Nickel PASSIVATED.375 9.53 .625 15.88 390PS036ME1810 390PS036MT1810 390PS036NF1810 390PS036ZR1810 390PS036Z11810.438 11.13 .750 19.05 390PS036ME1812 390PS036MT1812 390PS036NF1812 390PS036ZR1812 390PS036Z11812.625 15.88 .938 23.83 390PS036ME1816 390PS036MT1816 390PS036NF1816 390PS036ZR1816 390PS036Z11816.375 9.53 .625 15.88 390PS036ME2010 390PS036MT2010 390PS036NF2010 390PS036ZR2010 390PS036Z12010.438 11.13 .750 19.05 390PS036ME2012 390PS036MT2012 390PS036NF2012 390PS036ZR2012 390PS036Z12012.625 15.88 .938 23.83 390PS036ME2016 390PS036MT2016 390PS036NF2016 390PS036ZR2016 390PS036Z12016.438 11.13 .750 19.05 390PS036ME2412 390PS036MT2412 390PS036NF2412 390PS036ZR2412 390PS036Z12412.625 15.88 .938 23.83 390PS036ME2416 390PS036MT2416 390PS036NF2416 390PS036ZR2416 390PS036Z12416.875 22.23 1.250 31.75 390PS036ME2420 390PS036MT2420 390PS036NF2420 390PS036ZR2420 390PS036Z12420.625 15.88 .938 23.83 390PS036ME2816 390PS036MT2816 390PS036NF2816 390PS036ZR2816 390PS036Z12816.875 22.23 1.250 31.75 390PS036ME2820 390PS036MT2820 390PS036NF2820 390PS036ZR2820 390PS036Z128201.000 25.40 1.380 35.05 390PS036ME2824 390PS036MT2824 390PS036NF2824 390PS036ZR2824 390PS036Z128241.000 25.40 1.380 35.05 390PS036ME3224 390PS036MT3224 390PS036NF3224 390PS036ZR3224 390PS036Z132241.250 31.75 1.625 41.28 390PS036ME3228 390PS036MT3228 390PS036NF3228 390PS036ZR3228 390PS036Z132281.437 36.50 1.875 47.63 390PS036ME3232 390PS036MT3232 390PS036NF3232 390PS036ZR3232 390PS036Z132321.000 25.40 1.375 34.93 390PS036ME3624 390PS036MT3624 390PS036NF3624 390PS036ZR3624 390PS036Z136241.250 31.75 1.625 41.28 390PS036ME3628 390PS036MT3628 390PS036NF3628 390PS036ZR3628 390PS036Z136281.437 36.50 1.875 47.63 390PS036ME3632 390PS036MT3632 390PS036NF3632 390PS036ZR3632 390PS036Z136321.875 25.40 2.375 60.33 390PS036ME3640 390PS036MT3640 390PS036NF3640 390PS036ZR3640 390PS036Z136401.000 47.63 1.375 34.93 390PS036ME4024 390PS036MT4024 390PS036NF4024 390PS036ZR4024 390PS036Z140241.250 31.75 1.625 41.28 390PS036ME4028 390PS036MT4028 390PS036NF4028 390PS036ZR4028 390PS036Z140281.437 36.50 1.875 47.63 390PS036ME4032 390PS036MT4032 390PS036NF4032 390PS036ZR4032 390PS036Z140322.125 47.63 2.375 60.33 390PS036ME4040 390PS036MT4040 390PS036NF4040 390PS036ZR4040 390PS036Z14040© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com72E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesAccessories390PS036 EMI/RFI Submersible BackshellAccessories390PS036 BACKSHELL WITH SADDLE BAR CLAMPLASSEMBLEDLENGTHA THREADWORKINGROOMSILICONEO-RINGØ C Ø D.88 (22.4) REFSILICONEGLANDHOLES FOR .020 (0.5)SAFETY WIREFIL. HD.TELESCOPINGSCREW 2 PLCSBØ BSADDLECLAMPCABLERANGEYFRONTADAPTERRFI RING,FRONTCOUPLING NUT WITHANTI-DECOUPLING MECHANISMFOLLOWERREAR RFI RING,ADAPTER REARXShellSize18202428323640Cable Range L Length Working AMin. Max. ±.12 (3.0) Room Thread 0B Max. 0C Max. 0D Min. 0X Max. Y Ref.In. mm. In. mm. In. mm. In. mm. Class 2B In. mm. In. mm. In. mm. In. mm. In. mm..375 9.53 .625 15.88 4.62 117.4 3.00 76.2 1.125-18 UNEF 1.44 36.6 1.406 35.71 1.000 25.40 1.281 32.54 1.312 33.32.438 11.13 .750 19.05 4.62 117.4 3.00 76.2 1.125-18 UNEF 1.44 36.6 1.406 35.71 1.000 25.40 1.312 33.32 1.593 40.46.625 15.88 .938 23.83 4.62 117.4 3.00 76.2 1.125-18 UNEF 1.44 36.6 1.531 38.89 1.125 28.58 1.406 35.71 1.750 44.45.375 9.53 .625 15.88 4.62 117.4 3.00 76.2 1.250-18 UNEF 1.54 39.1 1.531 38.89 1.125 28.58 1.281 32.54 1.312 33.32.438 11.13 .750 19.05 4.62 117.4 3.00 76.2 1.250-18 UNEF 1.54 39.1 1.531 38.89 1.125 28.58 1.312 33.32 1.593 40.46.625 15.88 .938 23.83 4.62 117.4 3.00 76.2 1.250-18 UNEF 1.54 39.1 1.656 42.06 1.250 31.75 1.406 35.71 1.750 44.45.438 11.13 .750 19.05 5.12 130.1 3.50 88.9 1.438-18 UNEF 1.73 43.9 1.656 42.06 1.250 31.75 1.312 33.32 1.593 40.46.625 15.88 .938 23.83 5.12 130.1 3.50 88.9 1.438-18 UNEF 1.73 43.9 1.781 45.24 1.375 34.93 1.593 40.46 1.750 44.45.875 22.23 1.250 31.75 5.12 130.1 3.50 88.9 1.438-18 UNEF 1.73 43.9 1.781 45.24 1.375 34.93 1.625 41.28 2.093 53.16.625 15.88 .938 23.83 5.12 130.1 3.50 88.9 1.812-16 UN 2.14 54.4 2.156 54.76 1.750 44.45 1.406 35.71 1.750 44.45.875 22.23 1.250 31.75 5.12 130.1 3.50 88.9 1.812-16 UN 2.14 54.4 2.156 54.76 1.750 44.45 1.593 40.46 2.093 53.161.000 25.40 1.380 35.05 5.12 130.1 3.50 88.9 1.812-16 UN 2.14 54.4 2.156 54.76 1.750 44.45 1.625 41.28 2.343 59.511.000 25.40 1.380 35.05 5.12 130.1 3.50 88.9 2.062-16 UNS 2.37 60.2 2.281 57.94 1.875 47.63 1.625 41.28 2.343 59.511.250 31.75 1.625 41.28 6.12 155.5 4.50 114.3 2.062-16 UNS 2.37 60.2 2.281 57.94 1.875 47.63 1.900 48.26 2.750 69.851.437 36.50 1.875 47.63 6.12 155.5 4.50 114.3 2.062-16 UNS 2.37 60.2 2.281 57.94 1.875 47.63 1.900 48.26 3.000 76.201.000 25.40 1.375 34.93 6.12 155.5 4.50 114.3 2.250-16 UN 2.63 66.8 2.531 64.29 2.125 53.98 1.625 41.28 2.343 59.511.250 31.75 1.625 41.28 6.12 155.5 4.50 114.3 2.250-16 UN 2.63 66.8 2.531 64.29 2.125 53.98 1.900 48.26 2.750 69.851.437 36.50 1.875 47.63 6.12 155.5 4.50 114.3 2.250-16 UN 2.63 66.8 2.531 64.29 2.125 53.98 1.900 48.26 3.000 76.201.875 47.63 2.375 60.33 6.62 168.2 5.00 127.0 2.250-16 UN 2.63 66.8 3.031 76.99 2.625 66.68 2.060 52.32 3.500 88.901.000 25.40 1.375 34.93 6.12 155.5 4.50 114.3 2.500-16 UN 2.93 74.4 2.781 70.64 2.375 60.33 1.625 41.28 2.343 59.511.250 31.75 1.625 41.28 6.12 155.5 4.50 114.3 2.500-16 UN 2.93 74.4 2.781 70.64 2.375 60.33 1.900 48.26 2.750 69.851.437 36.50 1.875 47.63 6.12 155.5 4.50 114.3 2.500-16 UN 2.93 74.4 2.781 70.64 2.375 60.33 1.900 48.26 3.000 76.201.875 47.63 2.375 60.33 6.62 168.2 5.00 127.0 2.500-16 UN 2.93 74.4 3.031 76.99 2.625 66.68 2.060 52.32 3.500 88.90H© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com73E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesAccessories480-002 Panel Mount Nut PlatesAccessoriesPanel Mount Nut PlatesNut plates speed up connector installation and eliminate dropped hardware in hardto-reachlocations. For use with 970-003 square flange panel mount connectors. Twostyles: full perimeter and 3/4 perimeter. Install full perimeter plate over wires beforeterminating the connector. 3/4 perimeter version can be installed on wired connectors.Aluminum plate with self-locking stainless steel female clinch nuts. Plate is coatedwith chem film per MIL-DTL-5541 Class 1A. For maximum corrosion protection chooseoptional double coating of epoxy primer paint.BFig.12Nut Plate With Chem FilmStyle3/4PerimeterFullPerimeter13/4 perimeter nut plate for installationon pre-wired assemblies. Shown withoptional epoxy primer over chem film coating.How To OrderPart Number Part Number A B Max. 0C D EShell with Chem with Chem Film In. mm.In. mm. In. mm. ThreadSize Filmand Epoxy Paint ±.003 ±0.08 In. mm. ±.010 ±0.25 ±.015 ±0.38 UNC-2B18 480-002-1EA18 480-002-1EAP18 1.015 25.78 1.383 35.13 1.142 29.01 .684 17.37 6-3220 480-002-1EA20 480-002-1EAP20 1.140 28.96 1.508 38.30 1.266 32.16 .809 20.55 6-3224 480-002-1EA24 480-002-1EAP24 1.281 32.64 1.718 43.64 1.516 38.51 .950 24.13 6-3228 480-002-1EA28 480-002-1EAP28 1.568 39.83 2.138 54.31 1.828 46.43 1.160 29.46 8-3232 480-002-1EA32 480-002-1EAP32 1.734 44.04 2.328 59.13 2.078 52.78 1.326 33.68 8-3236 480-002-1EA36 480-002-1EAP36 1.984 50.39 2.578 65.48 2.266 57.56 1.576 40.03 8-3240 480-002-1EA40 480-002-1EAP40 2.234 56.74 2.828 72.34 2.516 63.91 1.826 46.38 8-3218 480-002-2EA18 480-002-2EAP18 1.015 25.78 1.383 35.13 1.142 29.01 .684 17.37 6-3220 480-002-2EA20 480-002-2EAP20 1.140 28.96 1.508 38.30 1.266 32.16 .809 20.55 6-3224 480-002-2EA24 480-002-2EAP24 1.281 32.64 1.718 43.64 1.516 38.51 .950 24.13 6-3228 480-002-2EA28 480-002-2EAP28 1.568 39.83 2.138 54.31 1.828 46.43 1.160 29.46 8-3232 480-002-2EA32 480-002-2EAP32 1.734 44.04 2.328 59.13 2.078 52.78 1.326 33.68 8-3236 480-002-2EA36 480-002-2EAP36 1.984 50.39 2.578 65.48 2.266 57.56 1.576 40.03 8-3240 480-002-2EA40 480-002-2EAP40 2.234 56.74 2.828 72.34 2.516 63.91 1.826 46.38 8-322Full perimeter nut plate. Assemble overwires before connector termination.Shown with optional epoxy primer over chemfilm coating.CLINCH NUT,E THREADSELF-LOCKING4 PLACES4 PLACES.188 (4.78)MAXBMAX A DspecificationsPlate: Aluminum Alloy with chemicalconversion coating per MIL-DTL-5541,Class 1AClinch Nuts: stainless steel, passivated,with dry film lubricant. NASM45938 type.Epoxy Paint: per MIL-PRF-23377, Type 1ØCFULL PERIMETER¾ PERIMETER.040THICKH© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com75E-Mail: sales@glenair.com

AccessoriesSeries 970 PowerTrip Connectors and AccessoriesAccessories660PS097 & 098 Protective CoversMETAL Protective CoversMetal covers protect unmated Series 970 connectors. Available with no attachment(see table below for part numbers), or choose sash chain, wire rope or nylon cordattachments from the ordering table on the following page.attachment optionsPlug CoverSash ChainTeflon ® Coated SST Wire Rope#8 sash chain, 300 series stainless steel,passivated. Glenair’s most popular attachmentoption for circular connector covers.Tough, flexible translucent FEP teflon® jacketover stainless steel, +200°C., resists weather,chemicals and abrasion. Glenair’s best sellingwire rope. 1/16 inch diameter uncoated, .09inch (2.3 mm) finished diameter.Black Nylon CordBlack braided nylon cord. Very flexible, verygood abrasion resistance, good chemicalresistance. .120” (3mm) diameter. +125°C.Receptacle CoverCoverGasket (Receptacle Cover)Rivet, RIng, Clevismaterials and finishesAluminum or Stainless Steel. See orderinginformation for finish options.SiliconeStainless SteelPROTECTIVE COVERs WITH NO ATTACHMENT (SEE NExT PAGE FOR ATTACHMENT OPTIONS)HShellSizeThreadSizeTypeaLUMINUM/NICKELaLUMINUM/Nickel-PTFEaLUMINUM/ODCadmiumaLUMINUM/BlackZinc-NickelSTAINLESSSteel/pASSIVATED18 1.125-.1P-.3L-TSPlug Cover 660PS097ME18N 660PS097MT18N 660PS097NF18N 660PS097ZR18N 660PS097Z118NReceptacle Cover 660PS098ME18N 660PS098MT18N 660PS098NF18N 660PS098ZR18N 660PS098Z118N20 1.250-.1P-.3L-TSPlug Cover 660PS097ME20N 660PS097MT20N 660PS097NF20N 660PS097ZR20N 660PS097Z120NReceptacle Cover 660PS098ME20N 660PS098MT20N 660PS098NF20N 660PS098ZR20N 660PS098Z120N24 1.500-.1P-.3L-TSPlug Cover 660PS097ME24N 660PS097MT24N 660PS097NF24N 660PS097ZR24N 660PS097Z124NReceptacle Cover 660PS098ME24N 660PS098MT24N 660PS098NF24N 660PS098ZR24N 660PS098Z124N28 1.750-.1P-.3L-TSPlug Cover 660PS097ME28N 660PS097MT28N 660PS097NF28N 660PS097ZR28N 660PS097Z128NReceptacle Cover 660PS098ME28N 660PS098MT28N 660PS098NF28N 660PS098ZR28N 660PS098Z128N32 2.000-.1P-.3L-TSPlug Cover 660PS097ME32N 660PS097MT32N 660PS097NF32N 660PS097ZR32N 660PS097Z132NReceptacle Cover 660PS098ME32N 660PS098MT32N 660PS098NF32N 660PS098ZR32N 660PS098Z132N36 2.250-.1P-.3L-TSPlug Cover 660PS097ME36N 660PS097MT36N 660PS097NF36N 660PS097ZR36N 660PS097Z136NReceptacle Cover 660PS098ME36N 660PS098MT36N 660PS098NF36N 660PS098ZR36N 660PS098Z136N40 2.500-.1P-.3L-TSPlug Cover 660PS097ME40N 660PS097MT40N 660PS097NF40N 660PS097ZR40N 660PS097Z140NReceptacle Cover 660PS098ME40N 660PS098MT40N 660PS098NF40N 660PS098ZR40N 660PS098Z140N© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com76E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesAccessories660PS097 & 098 Protective CoversAccessoriesPROTECTIVE COVERSAttach covers to panel or cable connector with sash chain or rope. Large ring fits underjam nut of panel mount receptacle or over accessory thread of cable connector (captivatewith backshell or adapter). Ring terminal fits #4, #6 or #8 screws on backshell or squareflange panel receptacle mounting screws. Split rings also available-see next page.How to OrderSeries660PS097Plug Cover660PS098ReceptacleCoverSHELL MATERIAL/ FinishMeAluminum /Electroless NickelRoHS CompliantNFAluminum /Cadmium with OliveDrab ChromateZRAluminum / Zinc-Nickel with Non-Reflective BlackChromateRoHS CompliantMTAluminum / Nickel-PTFERoHS CompliantZ1Stainless Steel /PassivatedRoHS CompliantSHELLSize18202428323640AttachmentTYPENNoattachmentSSash ChainHTeflonCoatedSST WireRopeGBlack NylonRopeAttachmentLengthLength inInches33 inches44 inches55 inches66 inchesOtherlengths areavailable,includingfractionalsizes.EXAMPLE:for a 7 ½inch length,use 7.5Fitting TYPE AND Diameter(See next page for additional sizes)Ring Terminal or Clevis for AttachingWith #4, #6 or #8 ScrewCLEVISSASH CHAINClevis FittingType S ChainRing TerminalType H and G RopeCode Screw Size Ring I.D.-06 #4 .125-09 #6 .156-03 #8 .191Ring for Attaching Under Jam NutReceptacle or Over Accessory ThreadShellSizeJam NutThd.Code-21 18 1.250 1.265-23 20 1.4375 1.453-27 24 1.625 1.640-31 28 1.9375 1.953-35 32 2.125 2.140-40 36 2.375 2.406-44 40 2.625 2.656ShellSizeAccess.Thd.Ring I.D.Code-19 18 1.125 1.140-21 20 1.250 1.265-23 24 1.500 1.453-30 28 1.750 1.875-33 32 2.000 2.077-40 36 2.250 2.406-44 40 2.500 2.656Sample Part Number660PS097 MT 24 S 4 -06Ring I.D.BH© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com77E-Mail: sales@glenair.com

AccessoriesSeries 970 PowerTrip Connectors and AccessoriesAccessories660PS097 & 098 Protective Covers660PS097 AND -098 PROTECTIVE COVERSLENGTH± .25 (6.35)SASH CHAIN IS± ONE LENGTHShell A Max.Size In. mm. B Thread18 1.417 36.0 1.125-.1P-.3L-TS20 1.535 39.0 1.250-.1P-.3L-TS24 1.772 45.0 1.500-.1P-.3L-TS28 2.007 51.0 1.750-.1P-.3L-TS32 2.244 57.0 2.000-.1P-.3L-TS36 2.480 63.0 2.250-.1P-.3L-TS40 2.716 69.0 2.500-.1P-.3L-TS1.14 (29.0)MAXSILICONEGASKIETø A660PS097 Plug CoverB THREAD (2A)LENGTH± .25 (6.35)SASH CHAIN IS± ONE LENGTH.906 (23.0)MAXring stylesB THREAD (2B)ø A660PS098 Receptacle CoverStyle A Solid Ring Style B Solid Ring Ring Terminal Clevis (Sash Chain) Split RingHring reference table (IN ASCENDING DIAMETER ORDER)Code Ring TypeI.D.In. mm.00 No Fitting - -06 Ring terminal/Clevis .125 3.1801 Ring terminal/Clevis .145 3.6809 Ring terminal/Clevis .156 3.9605 Ring terminal/Clevis .167 4.2402 Ring terminal/Clevis .182 4.6203 Ring terminal/Clevis .191 4.8504 Ring terminal/Clevis .197 5.0007 Ring terminal/Clevis .218 5.54095 Solid Ring Style A .312 7.92100 Solid Ring Style A .391 9.9350 Split Ring .425 10.8008 Solid Ring Style B .468 11.8952 Split Ring .485 12.32101 Solid Ring Style A .516 13.11102 Solid Ring Style A .583 14.8110 Solid Ring Style B .593 15.0654 Split Ring .640 16.26103 Solid Ring Style A .641 16.28104 Solid Ring Style A .708 17.9812 Solid Ring Style B .718 18.2456 Split Ring .750 19.05Code Ring TypeI.D.In. mm.13 Solid Ring Style B .765 19.43105 Solid Ring Style A .766 19.46205 Solid Ring Style A .788 20.0214 Solid Ring Style B .844 21.4415 Solid Ring Style B .890 22.6158 Split Ring .890 22.61106 Solid Ring Style A .896 22.76206 Solid Ring Style A .907 23.0416 Solid Ring Style B .968 24.5917 Solid Ring Style B 1.015 25.7860 Split Ring 1.015 25.78107 Solid Ring Style A 1.016 25.81207 Solid Ring Style A 1.025 26.0418 Solid Ring Style B 1.093 27.7662 Split Ring 1.095 27.8164 Split Ring 1.130 28.7019 Solid Ring Style B 1.140 28.96108 Solid Ring Style A 1.141 28.98308 Solid Ring Style A 1.188 30.18208 Solid Ring Style A 1.203 30.5620 Solid Ring Style B 1.203 30.5666 Split Ring 1.250 31.75Code Ring TypeI.D.In. mm.21 Solid Ring Style B 1.265 32.13109 Solid Ring Style A 1.266 32.16209 Solid Ring Style A 1.312 33.3222 Solid Ring Style B 1.343 34.1168 Split Ring 1.350 34.2970 Split Ring 1.375 34.93110 Solid Ring Style A 1.391 35.33210 Solid Ring Style A 1.438 36.5323 Solid Ring Style B 1.453 36.9124 Solid Ring Style B 1.484 37.6972 SPLIT RING 1.485 37.72111 Solid Ring Style A 1.521 38.63211 Solid Ring Style A 1.536 39.0125 Solid Ring Style B 1.577 40.0674 Split Ring 1.625 41.2827 Solid Ring Style B 1.640 41.66112 Solid Ring Style A 1.641 41.6828 Solid Ring Style B 1.687 42.8576 Split Ring 1.750 44.4529 Solid Ring Style B 1.765 44.83113 Solid Ring Style A 1.766 44.86213 Solid Ring Style A 1.812 46.02Code Ring TypeI.D.In. mm.78 Split Ring 1.875 47.6330 Solid Ring Style B 1.890 48.01114 Solid Ring Style A 1.891 48.03214 Solid Ring Style A 1.938 49.2331 Solid Ring Style B 1.953 49.6132 Solid Ring Style B 1.968 49.9980 Split Ring 1.980 50.2982 Split Ring 2.060 52.3233 Solid Ring Style B 2.077 52.76115 Solid Ring Style A 2.078 52.7835 Solid Ring Style B 2.140 54.3636 Solid Ring Style B 2.187 55.5584 Split Ring 2.235 56.7786 Split Ring 2.310 58.67116 Solid Ring Style A 2.406 61.1140 Solid Ring Style B 2.406 61.1188 Split Ring 2.475 62.87117 Solid Ring Style A 2.510 63.7590 Split Ring 2.655 67.4444 Solid Ring Style B 2.656 67.4692 Split Ring 2.810 71.3748 Solid Ring Style B 3.031 76.9994 Split Ring 3.045 77.34© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com78E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesAccessories780-001 Bean Rubber CoversAccessoriesRubber Covers for Series 970 connectorsThese splashproof molded rubber coversfit Series 970 plugs and receptacles.Braided black nylon lanyard is availablewith metal rings, cable tie or slipknot forattachment to panel or to cable. -400 to+1200 C operating temperature.materialsCoverSBR rubber blend,blackLanyard.094 (2.4) nylon cord,blackCable TieNylon, black, SSTlocking tabAttachmentRingStainless steelFriction Sleeve KynarBCrimp RingCopper alloy, tin platedSeries780-001Plug Cover780-002ReceptacleCoverSize780-001 PlugCoversSizeCodeShellSize-19 18-22 20-25 24-32 28-36 32-38 36-44 40780-002ReceptacleCovers-14 18-16 20-22 24-24 28-27 32-32 36-36 40LANYARDTypeGBlackNylonRopeHow to OrderLANYARDAttachment CodeLengthLength inInches± 1 (25.4)Inch-WSNylon Cable Tie, 1.77 Inch (45mm) Maximum WireBundle Diameter-SKAdjustable Slip Knot with Friction Sleeve. The sleevecan be crimped with pliers for a permanent attachment.-00Lanyard With No Attachment (Fused End)Ring Terminals and Solid RingsRing TerminalSolid RingSample Part Number780-001 -19 G 5 -SK-06 – .125 (3.2) I.D.-09 – .156 (3.9) I.D.-03 – .191 (4.9) I.D.-19 – 1.140 (29.0) I.D.-21 – 1.265 (32.1) I.D.-23 – 1.453 (36.9) I.D.-27 – 1.640 (41.7) I.D.-30 – 1.875 (47.6) I.D.-31 – 1.953 (49.6) I.D.-33 – 2.077 (52.8) I.D.-35 – 2.140 (54.4) I.D.-40 – 2.406 (61.1) I.D.-44 – 2.656 (67.5) I.D.MATERIALOmit for StandardSBR RubberCOptionalConductive RubberH© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com79E-Mail: sales@glenair.com

AccessoriesSeries 970 PowerTrip Connectors and AccessoriesAccessories780-001 Bean Rubber CoversRubber COVERSSOLID RINGTYPE BTYPE ALUG TERMINALNO LUG, FUSED END (00)SLIP KNOT WITH CRIMP SLEEVE (SK)ø.50REFLENGTH MEASUREDAT.50 DIAMETERDABCCABLE TIE (WS)LENGTHLENGTH IN INCHES, ± 1.00 INCH (2.54 mm.)ShellSize Type Part Number18202428323640780-001 and 780-002 dimensionsA Dia. B Dia. C Typ. D Dia.In. mm. In. mm. In. mm. In. mm.Plug 780-001-19 1.58 40.13 1.36 34.54 1.25 31.75 2.18 55.37Receptacle 780-002-13 1.22 30.99 1.00 25.40 .63 16.00 1.68 42.67Plug 780-001-22 1.68 42.67 1.44 36.58 1.25 31.75 2.31 58.67Receptacle 780-002-16 1.31 33.27 1.09 27.69 .63 16.00 1.81 45.97Plug 780-001-25 1.96 49.78 1.74 44.20 1.25 31.75 2.68 68.07Receptacle 780-002-22 1.68 42.67 1.46 37.08 .63 16.00 2.31 58.67Plug 780-001-32 2.31 58.67 2.13 54.10 1.25 31.75 2.98 75.69Receptacle 780-002-24 1.80 45.72 1.59 40.39 .69 17.53 2.43 61.72Plug 780-001-36 2.56 65.02 2.32 58.93 1.25 31.75 3.21 81.53Receptacle 780-002-27 2.16 54.86 1.75 44.45 .69 17.53 2.58 65.53Plug 780-001-38 2.76 70.10 2.50 63.50 1.25 31.75 3.21 81.53Receptacle 780-002-32 2.31 58.67 2.13 54.10 .69 17.53 2.98 75.69Plug 780-001-44 3.06 77.72 2.84 72.14 1.56 39.62 3.58 90.93Receptacle 780-002-36 2.56 65.02 2.32 58.93 .69 17.53 3.21 81.53H© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com80E-Mail: sales@glenair.com

Series 970 PowerTrip Connectors and AccessoriesAccessories780-001 Bean Rubber CoversAccessoriesRubber COVERS FOR SERIES 970 CONNECTORSRing for Attaching Under Jam NutReceptacleRing for Attaching Over AccessoryThreadATTACHMENT RINGFITS UNDER JAM NUTPANELGLENAIR 12BRingCodeShellSizeJam NutThd.RingI.D.-21 18 1.250 1.265-23 20 1.4375 1.453-27 24 1.625 1.640-31 28 1.9375 1.953-35 32 2.125 2.140-40 36 2.375 2.406-44 40 2.625 2.656RingCodeShellSizeAccess.Thd.RingI.D.-19 18 1.125 1.140-21 20 1.250 1.265-23 24 1.500 1.453-30 28 1.750 1.875-33 32 2.000 2.077-40 36 2.250 2.406-44 40 2.500 2.656ring stylesStyle A Solid Ring Style B Solid Ring Ring Terminal Split Ringring reference table (IN ASCENDING DIAMETER ORDER)Code Ring TypeI.D.In. mm.00 No Fitting - -06 Ring terminal .125 3.1801 Ring terminal .145 3.6809 Ring terminal .156 3.9605 Ring terminal .167 4.2402 Ring terminal .182 4.6203 Ring terminal .191 4.8504 Ring terminal .197 5.0007 Ring terminal .218 5.54095 Solid Ring Style A .312 7.92100 Solid Ring Style A .391 9.9350 Split Ring .425 10.8008 Solid Ring Style B .468 11.8952 Split Ring .485 12.32101 Solid Ring Style A .516 13.11102 Solid Ring Style A .583 14.8110 Solid Ring Style B .593 15.0654 Split Ring .640 16.26103 Solid Ring Style A .641 16.28104 Solid Ring Style A .708 17.9812 Solid Ring Style B .718 18.2456 Split Ring .750 19.05Code Ring TypeI.D.In. mm.13 Solid Ring Style B .765 19.43105 Solid Ring Style A .766 19.46205 Solid Ring Style A .788 20.0214 Solid Ring Style B .844 21.4415 Solid Ring Style B .890 22.6158 Split Ring .890 22.61106 Solid Ring Style A .896 22.76206 Solid Ring Style A .907 23.0416 Solid Ring Style B .968 24.5917 Solid Ring Style B 1.015 25.7860 Split Ring 1.015 25.78107 Solid Ring Style A 1.016 25.81207 Solid Ring Style A 1.025 26.0418 Solid Ring Style B 1.093 27.7662 Split Ring 1.095 27.8164 Split Ring 1.130 28.7019 Solid Ring Style B 1.140 28.96108 Solid Ring Style A 1.141 28.98308 Solid Ring Style A 1.188 30.18208 Solid Ring Style A 1.203 30.5620 Solid Ring Style B 1.203 30.5666 Split Ring 1.250 31.75Code Ring TypeI.D.In. mm.21 Solid Ring Style B 1.265 32.13109 Solid Ring Style A 1.266 32.16209 Solid Ring Style A 1.312 33.3222 Solid Ring Style B 1.343 34.1168 Split Ring 1.350 34.2970 Split Ring 1.375 34.93110 Solid Ring Style A 1.391 35.33210 Solid Ring Style A 1.438 36.5323 Solid Ring Style B 1.453 36.9124 Solid Ring Style B 1.484 37.6972 Split Ring 1.485 37.72111 Solid Ring Style A 1.521 38.63211 Solid Ring Style A 1.536 39.0125 Solid Ring Style B 1.577 40.0674 Split Ring 1.625 41.2827 Solid Ring Style B 1.640 41.66112 Solid Ring Style A 1.641 41.6828 Solid Ring Style B 1.687 42.8576 Split Ring 1.750 44.4529 Solid Ring Style B 1.765 44.83113 Solid Ring Style A 1.766 44.86213 Solid Ring Style A 1.812 46.02Code Ring TypeI.D.In. mm.78 Split Ring 1.875 47.6330 Solid Ring Style B 1.890 48.01114 Solid Ring Style A 1.891 48.03214 Solid Ring Style A 1.938 49.2331 Solid Ring Style B 1.953 49.6132 Solid Ring Style B 1.968 49.9980 Split Ring 1.980 50.2982 Split Ring 2.060 52.3233 Solid Ring Style B 2.077 52.76115 Solid Ring Style A 2.078 52.7835 Solid Ring Style B 2.140 54.3636 Solid Ring Style B 2.187 55.5584 Split Ring 2.235 56.7786 Split Ring 2.310 58.67116 Solid Ring Style A 2.406 61.1140 Solid Ring Style B 2.406 61.1188 Split Ring 2.475 62.87117 Solid Ring Style A 2.510 63.7590 Split Ring 2.655 67.4444 Solid Ring Style B 2.656 67.4692 Split Ring 2.810 71.3748 Solid Ring Style B 3.031 76.9994 Split Ring 3.045 77.34H© 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com81E-Mail: sales@glenair.com

Material/FinishQuick PicksQuick Picks:A Guide to Glenair’s Most PopularMaterials and FinishesElectroless NickelCost $Conductivity + + + + +CorrosionResistance -65 to +200°CGlenair Code M, MEAluminum plated with electroless nickeloffers excellent conductivity, wear resistance,and adequate corrosion resistance. Typicallyspecified on electrical connectors and accessories used inavionics boxes, exoatmospheric equipment, and missiles,electroless nickel is a good choice when exposure tomarine or corrosive atmospheres is not a primary concern.The plating process is purely chemical, and once started, isautocatalytic (it runs by itself).Marine BronzeCost $ $ $ $Conductivity + + + +CorrosionResistance -65 to +200°CGlenair Code ABMarine bronze, an alloy of bronze, aluminumand nickel, is more resistant to the corrosiveeffects of seawater than ferrous alloys. Usedon Glenair’s GeoMarine connector coupling nuts, marinebronze is unplated and develops an aluminum oxideprotective layer when exposed to air. Marine bronzeconnectors and accessories are found in shipboard andoffshore drilling applications.Black Zinc NickelCost $ $ $ $Conductivity + + +CorrosionResistance -65 to +175°CGlenair Code ZRRoHS-compliant black zinc-nickel is approvedfor MIL-DTL-38999, AS85049 and other majormilitary specifications as a replacement forcadmium and hexavalent chromium platings. The nonreflectivefinish and good conductivity make the GlenairZR finish a leading choice for cadmium-free tacticalsystems. Corrosion resistance is comparable to cadmium,and the ZR finish is backward-compatible with Cd-platedconnectors and accessories.Zinc-NickelCost $ $Conductivity + + +CorrosionResistance -65 to +175°CGlenair Code ZN, ZNURecently added to MIL-DTL-38999 and MIL-RoHSDTL-83513, zinc-nickel plated aluminumNot Compliant has become a cost-effective alternativeto cadmium. Available with olive drab or black chromateconversion coatings, zinc-nickel plated aluminum iscommonly found on soldier systems and military airframeapplications.CadmiumCost $ $Conductivity + + + +CorrosionResistance -65 to +175°CGlenair Code NF, JFRoHSCadmium plated aluminum has been theunchallenged workhorse of the defense/Not Compliant aerospace industry. Offering up to 1000hours of salt spray protection when deposited overelectroless nickel, cadmium is highly conductive, andprovides good lubricity and resistance to galling. Asplated, cadmium has a silvery appearance. A subsequentchromic acid passivation bath creates a chromate topcoatover the cadmium, enhancing corrosion protection. Olivedrab chromate is widely used, followed by gold chromateand clear chromate.Stainless SteelCost $ $ $ $ $Conductivity + + +CorrosionResistance -65 to +200°CGlenair Code Z1, ZL, ZWStainless steel offers unbeatable strengthand protection from environmental stress ifdurability and corrosion resistance are moreimportant than cost and weight. Typically found on aircraftengines, landing gear, geophysical equipment, armoredvehicles and marine applications, passivated stainlesssteel is widely specified in throughout the interconnectindustry. Also offered with nickel and cadmium plating forimproved conductivity, stainless steel is an obviousalternative to cadmium if cost and weight are not an issue.© 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com82E-Mail: sales@glenair.com

Quick Picks:A Guide to Glenair’s Most PopularMaterials and FinishesMaterial/FinishQuick PicksBlack AnodizeCost $ConductivityCorrosionResistance -65 to +175°CGlenair Code CBlack anodized aluminum is a popular finishfor electrical connectors and accessories.Typically employed when conductivity is notrequired, black anodized aluminum offers a modicum ofcorrosion protection and is relatively inexpensive.Anodizing is an electrolytic process that creates aluminumoxide films by oxidizing the base metal. The resultingcoating is much harder and denser than natural oxidation.The parts are immersed in a sulfuric acid solution at roomtemperature. After anodizing, the parts are dyed black.Chem FilmCost $ $Conductivity + + +CorrosionResistance -65 to +175°CGlenair Code ERoHSChem Film is Glenair’s standard chem filmfinish. Plated IAW MIL-DTL-5541, Class3, Chem Film is a relatively inexpensive,moderately durable barrier plating. This chemicalconversion coating is intended for use as a corrosionpreventative film for electrical and electronic applicationswhere lower resistant contacts, relative to Class 1Acoatings, and anodic coatings in accordance withMil-A-8625, are required.Not CompliantZinc-CobaltCost $ $Conductivity + + +CorrosionResistance -65 to +175°CGlenair Code UC, UCR, ZC, ZCRZinc-cobalt with olive drab chromate topcoatfills the need for a RoHS compliant conductiveNF olive drab finish for military vehicles,robots and other land system equipment.AlumiPlate SMCost $ $ $ $ $Conductivity + + + + +CorrosionResistance -65 to +175°CGlenair Code AL, XALAlumiPlate provides excellent conductivityand corrosion resistance. 99.99% purealuminum is electrolytically deposited ontoaluminum or composite in a specialized water-freeprocess, followed by a trivalent chromate conversioncoating. AlumiPlate has been approved by Boeing andLockheed as a replacement for cadmium. AlumiPlate hasbeen added to MIL-DTL-38999 and MIL-DTL-83513.Threaded parts require dry lube to prevent galling.AlumiPlate is a service mark of AlumiPlate Incorporated,Minneapolis, Minnesota.Nickel-PTFECost $ $ $ $Conductivity + + + + +CorrosionResistance -65 to +175°CGlenair Code MT, ZMTNow approved for MIL-DTL-38999 and MIL-DTL-83513, Glenair’s 1000 Hour Grey meetsthe need for a cadmium replacement withexcellent conductivity, wear resistance and corrosionprotection. This extremely durable finish is gun-metalgray. A proprietary preliminary undercoat is followed witha composite coating of electroless nickel phosphorus andpolytetra-fluoroethylene (PTFE). An organic topcoatprovides sealing and added resistance to SO2 salt fog. Ni-PTFE is approved for the Joint Strike Fighter and offersextremely good lubricity.Hardcoat AnodizeCost $ $ $ConductivityCorrosionResistance -65 to +200°CGlenair Code G2Hardcoat anodized aluminum offers greaterwear resistance and better corrosionresistance compared to conventionalanodizing. Typically employed when conductivity is notrequired, hardcoat aluminum offers good corrosionprotection for marine and tactical applications. Theresulting finish is a matte greenish-gray color. Hardcoatanodizing is an electrolytic process that creates aluminumoxide films by oxidizing the base metal in a sulfuric acidsolution. The parts are immersed in a sulfuric acid solutionat cold temperature. After anodizing, the parts can be dyedblack (code GB).© 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com83E-Mail: sales@glenair.com

Why ChooseGLENAIR?GLENAIR?OutstandingCustomer Service!Plenty of Raw Materials!In-House Assembly!Abundant Machining Capacity!Huge “Same-Day” Inventory!One of North America'sand Machining

State-of-the-Art Plating CapabilitiesHigh-Production InjectionMolding EquipmentThe Industry's Most ExperiencedEMI/RFI Braided Shielding SpecialistsLargest CNC MillingInstallationsClean Rooms for Filter Array and PrintedCircuit Board Assembly

Out of This WorldINTERCONNECTSOLUTIONSGlenair, Inc.1211 Air Way • Glendale, California • 91201-2497Telephone: 818-247-6000 • Fax: 818-500-9912 • sales@glenair.comwww.glenair.comGlenair PowerProducts Group860 N. Main Street ExtensionWallingford, CT06492Telephone:203-741-1115Facsimile:203-741-0053sales@glenair.comGlenair UK Ltd40 Lower Oakham WayOakham Business ParkP.O. Box 37, MansfieldNotts, NG18 5BY EnglandTelephone:+44-1623-638100Facsimile:+44-1623-638111sales@glenair.co.ukGlenair Microway Systems7000 North Lawndale AvenueLincolnwood, IL60712Telephone:847-679-8833Facsimile:847-679-8849Glenair Nordic ABGustav III : S Boulevard 46S - 169 27 SolnaSwedenTelephone:+46-8-50550000Facsimile:+46-8-50550001sales@glenair.seGlenair Electric GmbHSchaberweg 28D. 61348 Bad HomburgGermanyTelephone:06172 / 68 16 0Facsimile:06172 / 68 16 90germany@glenair.comGlenair IbericaC/ La Vega, 1645612 VeladaSpainTelephone:+34-925-89-29-88Facsimile:+34-925-89-29-87sales@glenair.esGlenair Italia S.p.A.Via Del Lavoro, 740057 Quarto Inferiore –Granarolo dell’EmiliaBologna, ItalyTelephone:+39-051-782811Facsimile:+39-051-782259info@glenair.itGlenair France SARL7, Avenue ParmentierImmeuble Central Parc #231200 ToulouseFranceTelephone:+33-5-34-40-97-40Facsimile:+33-5-61-47-86-10sales@glenair.fr© 2013 Glenair, Inc. Printed in U.S.A.