TEMPERATURE °CONTROLS - Temperature Controls

LEVEL SWITCHES
Multi –Float Level Switches made to order.
A magnet fitted inside the float actuates a reed switch making it change state as the float moves up or down the stem with
the rise or fall in liquid. Multiple floats are fitted to provide accurate liquid switch positions or high low alarm output points.
SD 189
S3 316 S/S Float
45 mm dia
SG = 0.65
Large Magnetic Float Level Switch, 12.7 mm dia 316 Stainless Steel Stem
Up to 5 Floats on stem, with common or individually wired reed switch contacts
Normally Open / Normally Closed or Change over contacts at extra cost.
Available with 2” BSPT Fixed Fitting or Optional Male Connector
Table D or ANSI Flange Sizes available
Maximum Length 3000 mm
Maximum Temperature 180 °C
Select terminal head to suit your application process conditions.
S4 316 S/S Float
52 mm dia
SG = 0.55
SD 179
S1 316 S/S Float
29 mm dia
SG = 0.8
Small Magnetic Float Level Switch, 8.0 mm dia 316 Stainless Steel Stem
Up to 5 Floats on stem, with common or individually wired reed switch contacts
Normally Open / Normally Closed or Change over contacts at extra cost.
Available with 1” BSPT Fixed Fitting or Optional Male Connector
Table D or ANSI Flange Sizes available
Maximum Length 2000 mm
Maximum Temperature 180 °C
Detailed drawings and process capabilities
available from www.temperature.com.au
NBR Float
18 mm dia
SG = 0.5
ANALOGUE 4-20 mA OUTPUT LEVEL SENSING
Custom manufactured all 316 Stainless Steel Continuous Liquid Level control
using Resistor chain input into head mounted transmitter giving 4—20 mA or
20—4 Ma output signal.
Maximum Temperature 120 °C
Maximum Length 2500 mm 10 mm or 18 mm Resolution
Process Connection 2” BSP or 2” Table Flange or ANSI size flanges as specified.
Float = Model S3 45 mm dia SG 0.65
SD 737
Copyright 2009. Due to ongoing product development, prices and specifications are subject to change without notice.
Prices do not include GST.
43.