LEESON / LINCOLN Motor Catalog - Norfolkbearings.com

More documents

Recommendations

Info

INSTANT REVERSING MOTORS AC MOTORS INSTANT REVERSING MOTORS parking gates, door operators & slide gates General Specifications: Specially designed motors for use on “instant-reversing” parking gates, doors, slide gates, or other moderate starting torque instant reversing applications. Capable of frequent reversing service. RESILIENT BASE • SINGLE PHASE • DRIP-PROOF SYN App. Over- F.L. “C” RPM NEMA Catalog Wgt. load Amps Dim. HP 60 Hz Frame Number (lbs.) Voltage Prot. 115V (Inches) 1/3 1800 S56 191742.00 18 115 Man. 4.0 10.31 1/2 1800 S56 100802.00 D 24 115 Man. 6.1 11.31 1800 S56 103460.00 22 115 Man. 5.0 9.94 1800 S56 191743.00 24 115 Man. 4.6 10.31 3/4 1800 56H 113642.00 33 115 Man. 8.2 11.31 Notes: D = Item will be Discontinued once inventory is depleted Features (Resilient Base and C Face): Instant “plug-reversing” with simple three-wire connection. Permanent split capacitor design offering low inrush and full load amps. Manual reset overload protector. Starting torque approximately 150% of full load, not suitable for hard to start loads. Features (Rigid Base): Capacitor start, induction run motors with solid state, instant reversing switch. Manual reset overload protector. C FACE LESS BASE • SINGLE PHASE • DRIP-PROOF SYN App. Over- F.L. “C” RPM NEMA Catalog Wgt. load Amps Dim. HP 60 Hz Frame Number (lbs.) Voltage Prot. 115V (Inches) 1/3 1800 S56C 102017.00 18 115 Man. 4.2 9.99 1/2 1800 S56C 102021.00 22 115 Man. 6.1 10.49 1800 S56C 100704.00T 16 115 Man. 5.1 10.24 T Motor has same electrical design as 102017, but is rated for intermittent duty. RIGID BASE • SINGLE PHASE • TEFC SYN App. Over- F.L. “C” RPM NEMA Catalog Wgt. load Amps Dim. HP 60 Hz Frame Number (lbs.) Voltage Prot. 230V (Inches) 3/4 1800 56 114932.00 30 115/208-230 Man. 5.4 11.31 1 1800 56 114933.00 30 115/208-230 Man. 6.4 11.81 Electra Boat Hoist Motors - Stainless Steel Frame - Aluminum Endbells - 15 minute Duty BOAT HOIST MOTORS Our Electra Gear line of Boat Hoist Duty motors provide customized features that are needed to support the Boat Hoist Industry. Features Include: • Stainless Steel frame, base, capacitor case and conduit box cover • 15 Minute Duty Cycle • Drain Holes located at 6:00 position • TENV enclosure • Die Cast Aluminum endbells • Capacitor case located at 12:00 • 115/230 Volt – 1.15 S.F. • UL and CSA listed 56 FRAME • C-FACE WITH BASE SYN App. F.L. “C” RPM NEMA Catalog Wgt. Amps Dim. HP 60 Hz Frame Number (lbs.) Voltage 230V (Inches) 1/2 1800 56C 6439191250 23 115/208-230 4.1 10.5 3/4 1800 56C 6439191251 25.5 115/208-230 4.9 11.1 1 1800 56C 6439191252 33 115/208-230 6.8 11.7 1-1/2 1800 56C 6439191253 47 115/208-230 8.4 12.6 56 FRAME • C-FACE MOTRS LESS BASE SYN App. F.L. “C” RPM NEMA Catalog Wgt. Amps Dim. HP 60 Hz Frame Number (lbs.) Voltage 230V (Inches) 1/2 1800 56C 6439191260 22 115/208-230 4.1 10.5 3/4 1800 56C 6439191261 23.5 115/208-230 4.9 11.1 1 1800 56C 6439191262 32 115/208-230 6.8 11.7 1-1/2 1800 56C 6439191263 46 115/208-230 8.4 12.6 2 1800 56C 6439191264 47.5 115/208-230 9 13.4 108 Specifications are subject to change without notice
TWO-WINDING VARIABLE TORQUE PSC TYPE FOR SHAFT MOUNTED FAN APPLICATIONS These fan and blower duty motors are designed for dependable, energy saving performance in applications where the fan is mounted on the shaft of the motor. The permanent split capacitor design does not require a centri fugal switch, resulting in higher reliability than on other types of single phase motors. This design is also more energy efficient and less expensive to operate. These motors may be operated at listed speed or two speed operation may be achieved by using the proper auxiliary switch. They are suitable for variable speed by adjusting the voltage to the motor using a variable voltage control.√ Overload protected with a UL and CSA recognized automatic reset protector. Grounding provisions. Totally enclosed, dust tight design, with resilient mounting for quiet operation. Lubricated with Exxon POLYREX ® EM high temperature lubricant. Exterior coating on 56-frame motors is two-stage epoxy and on 48-frame motors a baked-on powder coat is applied for extra corrosion resistance in tough applications. Because of the inherently low starting torques of this design, these motors are not suitable for belt driven fan applications. They must be mounted within the air stream of the driven fan. TWO-SPEED, TWO-WINDING VARIABLE TORQUE FOR BELT DRIVEN OR SHAFT MOUNTED FAN APPLICATIONS Variable torque, two-speed motors are suited for belted or fan on shaft applications. They are self ventilated, and may be mounted within or outside of the driven fan’s air stream. Resilient mounted for quiet operation, and lubricated with high temperature Exxon POLYREX ® EM lubricant. 3/4 HP and larger single phase are capacitor start motors; smaller single phase are split phase start. FAN & BLOWER MOTORS MULTI-SPEED • SINGLE & THREE PHASE SINGLE PHASE • PSC TYPE • RESILIENT BASE TOTALLY ENCLOSED AIR OVER (TEAO) SYN App. Over- F.L. “C” RPM NEMA Catalog Wgt. load Amps Dim. HP 60 Hz Frame Number (lbs.) Voltage Prot. 230V (Inches) 1/4 1800 48Z* 100803.00 19 115/230 Auto. 1.4 10.66 1200 48Z* 100824.00 20 115/230 Auto. 1.4 10.66 1200 S56Z* 10080500 22 115/230 Auto. 1.4 11.06 1/3 1800 48Z* 100804.00 21 115/230 Auto. 1.6 10.66 1800 S56H 100767.00 22 115/230 Auto. 1.6 10.31 1800 56HY 111348.00Á 29 115/230 Auto. 1.7 12.94 1200 48Z* 100825.00 25 115/230 Auto. 1.8 11.16 1200 S56HZ* 100806.00 27 115/230 Auto. 1.8 11.56 1/2 1800 56HZ* 111323.00 30 115/230 Auto. 2.6 12.56 1800 S56H 100768.00 36 115/230 Auto. 2.2 10.81 1200 48Z* 101645.00 27 115/230 Auto. 2.8 11.16 1200 56HZ* 111321.008 37 115/230 Auto. 3.0 13.56 900 56HZ* 111919.008¯ 45 115/230 Auto. 3.2 13.56 3/4 1800 56HZ* 111324.00 34 115/230 Auto. 3.5 13.06 1800 56H 111266.00 36 115/230 Auto. 3.5 12.31 1200 56HZ* 111322.008¯ 44 115/230 Auto. 4.0 13.56 1 1800 56HZ* 111267.00 39 115/230 Auto. 4.4 12.81 These motors have a 1.0 Service Factor. SINGLE PHASE • PSC TYPE • RIGID BASE TOTALLY ENCLOSED AIR OVER (TEAO) SYN App. Over- F.L. “C” RPM NEMA Catalog Wgt. load Amps Dim. HP 60 Hz Frame Number (lbs.) Voltage Prot. 230V (Inches) 1/4 1800 48Y 100699.00 19 115/230 Auto. 1.4 10.65 1800 48Y 101252.00• 19 115/208-230 Auto. 1.5 10.40 1/3 1800 48Y 100700.00 21 115/230 Auto. 1.6 10.65 1800 56Y 111202.00¬ A 27 115/230 Auto. 1.7 12.00 1800 48Y 101253.00• A 22 115/208-230 Auto. 1.9 10.65 1200 S56Z 100604.00 23 115/230 Auto. 1.8 11.40 1/2 1800 48Y 100701.00 25 115/230 Auto. 2.5 12.15 1800 S56Y 101176.00•3 24 115/230 Auto. 3.5 10.40 SINGLE PHASE • DRIP-PROOF • RESILIENT BASE SYN App. Over- F.L. “C” RPM NEMA Catalog Wgt. load Amps Dim. HP 60 Hz Frame Number (lbs.) Voltage Prot. High/Low (Inches) 1/4-1/12 1800/1200 48Z* 101020.00 20 115 None 4.2-3.2 11.64 1/3-0.15 1800/1200 S56H 101021.00 26 115 None 5.0-4.6 12.27 1/2-1/4 1800/1200 56H 111953.00 33 115 None 7.8-4.6 12.31 1800/1200 56H 113643.00 33 230 None 3.9-2.3 12.31 3/4-1/3 1800/1200 56H 111954.008 38 115 None 11.6-7.4 12.81 1800/1200 56H 113672.008 39 230 None 5.8-3.7 12.81 1-0.44 1800/1200 56H 111955.008I 41 115 None 13.2-9.5 12.81 1800/1200 56H 113373.008I 39 230 None 6.5-4.6 12.81 AC MOTORS • Suitable for single speed operation only. ¬ Has provisions for Bellyband and pedestal fan mounting – no rigid base. Á In addition to resilient base, this motor has provisions for Bellyband and pedestal mounting. 8 Combination 56H base motors have mounting holes for NEMA 56 and NEMA 143-5T and a standard NEMA 56 shaft. ¯ These 825 and 1075 RPM motors suitable for single speed operation only. * The shaft of this motor is 3/4” longer to accommodate fan on shaft mountings. 48Z is 1/2” diameter by 2 1 /4”. 56Z is 5/8” diameter, 2 5 /8” long. All have 1” extended through bolts, except Catalog Numbers 100805 and 100806 which are extended 1/4”. I Capacitor start/capacitor run design for reduced amperage, others are capacitor start/induction run. 3 This split phase start, capacitor run motor is suitable for belt drive within the airflow of the fan. A Subject to Availability. THREE PHASE • DRIP-PROOF • RESILIENT BASE SYN App. Over- F.L. “C” RPM NEMA Catalog Wgt. load Amps Dim. HP 60 Hz Frame Number (lbs.) Voltage Prot. High/Low (Inches) 1/2-.22 1800/1200 56H 111956.00 A 32 208-230 None 1.8-1.1 12.31 1800/1200 56H 111957.00 32 460 None 0.9-0.5 12.31 3/4-1/3 1800/1200 56H 111958.008 A 36 208-230 None 2.8-1.6 12.81 1800/1200 56H 111959.008 36 460 None 1.4-0.8 12.81 1-0.44 1800/1200 56H 111960.008 40 208-230 None 4.0-2.4 12.81 1800/1200 56H 111961.008 40 460 None 1.8-1.0 12.81 1 1 ⁄2-.67 1800/1200 56H 111962.008 40 208-230 None 5.0-2.6 12.81 1800/1200 56H 111963.008 40 460 None 2.5-1.3 12.81 These motors have a 1.0 Service Factor. Specifications are subject to change without notice 109
Page 2 and 3:
New Products From: Boat Hoist Duty
Page 4 and 5:
g Motors for General Purpose or DC
Page 6 and 7:
6 E.I.S.A. Facts: E.I.S.A. is an ac
Page 8 and 9:
THOUSANDS OF STOCK POWER TRANSMISSI
Page 10 and 11:
OFFERINGS WITH CUSTOMERS IN MIND LE
Page 12 and 13:
Application Information LEESON Elec
Page 14 and 15:
Variable Speed Operation Guidelines
Page 16 and 17:
Variable Speed Operation CONSTANT H
Page 18 and 19:
AC MOTORS CAST IRON • THREE PHASE
Page 20 and 21:
AC MOTORS THREE PHASE MOTORS - GENE
Page 22 and 23:
AC MOTORS THREE PHASE MOTORS - GENE
Page 24 and 25:
AC MOTORS C FACE MOTORS • THREE P
Page 26 and 27:
AC MOTORS C FACE MOTORS • THREE P
Page 28 and 29:
WATTSAVERe ® PREMIUM EFFICIENCY MO
Page 30 and 31:
AC MOTORS Frames 48 - 256T ODP 208,
Page 32 and 33:
AC MOTORS FOOT MOUNT (cont’d) ODP
Page 34 and 35:
AC MOTORS ODP 208, 230/460 & 460 VO
Page 36 and 37:
AC MOTORS ODP 208, 230/460 & 460 VO
Page 38 and 39:
AC MOTORS FOOT MOUNT TEFC 208, 230/
Page 40 and 41:
AC MOTORS FOOT MOUNT (cont’d) TEF
Page 42 and 43:
AC MOTORS C-FACE WITH FEET TEFC 208
Page 44 and 45:
AC MOTORS TEFC 208, 230/460 and 460
Page 46 and 47:
AC MOTORS TEFC 208, 230/460 and 460
Page 48 and 49:
Page 50 and 51:
AC MOTORS TEFC 15 TO 60 HZ CONSTANT
Page 52 and 53:
Page 54 and 55:
AC MOTORS TOTALLY ENCLOSED • 0 TO
Page 56 and 57:
AC MOTORS TOTALLY ENCLOSED • 0 TO
Page 58 and 59: AC MOTORS severe duty wattsaver plu
Page 60 and 61: AC MOTORS FOOT MOUNT (cont’d) TEF
Page 62 and 63: SINGLE PHASE MOTORS RIGID BASE •
Page 64 and 65: AC MOTORS C FACE MOTORS • SINGLE
Page 66 and 67: AC MOTORS ODP GENERAL PURPOSE 115,
Page 68 and 69: AC MOTORS ODP GENERAL PURPOSE OVERL
Page 70 and 71: AC MOTORS C-FACE WITH FEET TEFC GEN
Page 72 and 73: AC MOTORS AGRICULTURAL MOTORS GENER
Page 74 and 75: AC MOTORS AGRICULTURAL MOTORS SINGL
Page 76 and 77: AC MOTORS POULTRY MOTORS SINGLE AND
Page 78 and 79: AC MOTORS TEFC FARM DUTY/AGRICULTUR
Page 80 and 81: AC MOTORS Features: • Totally Enc
Page 82 and 83: AC MOTORS CROP DRYER 230 VOLTS •
Page 84 and 85: WASHGUARD MOTORS WASHDOWN SERVICE A
Page 86 and 87: WASHGUARD MOTORS WHITE EPOXY • TH
Page 88 and 89: AC MOTORS WASHGUARD II MOTORS STAIN
Page 90 and 91: AC MOTORS WASHGUARD ALL-STAINLESS M
Page 92 and 93: AC MOTORS WASHGUARD ALL-STAINLESS M
Page 94 and 95: WASHGUARD ALL-STAINLESS MOTORS ALL-
Page 96 and 97: AC MOTORS HARSH ENVIRONMENTS WASH-T
Page 98 and 99: AC MOTORS C-FACE FOOTLESS HARSH ENV
Page 100 and 101: AC MOTORS FOOT MOUNT (cont’d) ODP
Page 102 and 103: OTHER GENERAL PURPOSE MOTORS RIGID
Page 104 and 105: AC MOTORS RESILIENT BASE MOTORS •
Page 106 and 107: COMPRESSOR DUTY MOTORS COMPRESSOR,
Page 110 and 111: AC MOTORS AERATION FAN MOTORS Total
Page 112 and 113: AC MOTORS GE Commercial Motors By R
Page 114 and 115: CUSTOM MULTI-SPEED LOW-SPEED AND MO
Page 116 and 117: BRAKEMOTORS SINGLE & THREE PHASE AC
Page 118 and 119: BRAKEKITS AC MOTORS LEESON BRAKEKIT
Page 120 and 121: AC MOTORS explosion-proof for hazar
Page 122 and 123: AC MOTORS explosion-proof for hazar
Page 124 and 125: AC MOTORS JET PUMP MOTORS General S
Page 126 and 127: AC MOTORS JP PUMP MOTORS JP PUMP MO
Page 128 and 129: AC MOTORS JM PUMP MOTORS General Sp
Page 130 and 131: AC MOTORS 50 HZ • THREE PHASE Gen
Page 132 and 133: AC MOTORS ODP & TEFC 200/400 VOLT M
Page 134 and 135: AC MOTORS TEFC • FOOT MOUNT ODP &
Page 136 and 137: AC MOTORS ODP • 575 VOLT MOTORS 3
Page 138 and 139: AC MOTORS C-FACE WITH FEET ODP •
Page 144 and 145: AC MOTORS C-FACE WITH FEET (cont’
Page 146 and 147: AC METRIC (IEC) MOTORS THREE PHASE
Page 148 and 149: AC METRIC (IEC) MOTORS THREE PHASE
Page 150 and 151: DC MOTORS DC MOTORS NEMA DC MOTORS
Page 152 and 153: DC MOTORS EXPLOSION-PROOF AND WASHG
Page 154 and 155: DC MOTORS METRIC (IEC) FRAME • SC
Page 156 and 157: DC MOTORS NEMA FRAME • LOW VOLTAG
Page 158 and 159:
PREMIUM DC MOTORS NEMA & METRIC (IE
Page 160 and 161:
QUICK REFERENCE Stock Sub-FHP Gearm
Page 162 and 163:
SUB-FHP DC GEARMOTORS PARALLEL SHAF
Page 164 and 165:
SUB-FHP DC GEARMOTORS OFF-SET SHAFT
Page 166 and 167:
SUB-FHP DC GEARMOTORS PARALLEL SHAF
Page 168 and 169:
SERIES 12 SUB-FHP RIGHT ANGLE DC GE
Page 170 and 171:
IP55 WASHGUARD GEARMOTORS PARALLEL
Page 172 and 173:
SUB-FHP AC GEARMOTORS PARALLEL SHAF
Page 174 and 175:
SUB-FHP AC GEARMOTORS PARALLEL SHAF
Page 176 and 177:
SUB-FHP AC GEARMOTORS RIGHT-ANGLE S
Page 178 and 179:
SUB-FHP AC GEARMOTORS INVERTER RATE
Page 180 and 181:
AC MOTORS TOTALLY ENCLOSED AUTOMOTI
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
AC MOTORS HYDRAULIC ELEVATOR PUMP M
Page 190 and 191:
AC MOTORS VVVF (VARIABLE VOLTAGE VA
Page 192 and 193:
AC MOTORS VVVF (VARIABLE VOLTAGE VA
Page 194 and 195:
AC MOTORS TEFC • MEDIUM VOLTAGE 2
Page 196 and 197:
AC ADJUSTABLE SPEED DRIVES MICRO SE
Page 198 and 199:
DRIVES DYNAMIC BRAKING COMPONENTS F
Page 200 and 201:
AC ADJUSTABLE SPEED DRIVES SM PLUS
Page 202 and 203:
DRIVES AC ADJUSTABLE SPEED DRIVES S
Page 204 and 205:
AC ADJUSTABLE SPEED DRIVES SM VECTO
Page 206 and 207:
AC ADJUSTABLE SPEED DRIVES SUB-MICR
Page 208 and 209:
NEMA 4/12 NEMA 1 CHASSIS NEMA 4X TO
Page 210 and 211:
FIRE PUMP MOTORS ODP Features: •
Page 212 and 213:
FIRE PUMP MOTORS TEFC • FOOT MOUN
Page 214 and 215:
ACCESSORIES NEMA D FLANGE KITS STEE
Page 216 and 217:
MOTOR ACCESSORIES FIELD INSTALLED A
Page 218 and 219:
C-FACE FIELD CONVERSION KITS FOR UL
Page 220 and 221:
CE FIELD CONVERSION KITS 3-PHASE MO
Page 222 and 223:
MOD-SQUAD STOCK MOTOR MODIFICATION
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
MOD-SQUAD 232 L18 Motor Protection
Page 232 and 233:
Page 234 and 235:
CROSS REFERENCE CROSS REFERENCE EXC
Page 236 and 237:
CROSS REFERENCE BALDOR-TO-LEESON CR
Page 238 and 239:
CROSS REFERENCE BALDOR-TO-LEESON CR
Page 240 and 241:
CROSS REFERENCE MARATHON-TO-LEESON
Page 242 and 243:
CROSS REFERENCE MARATHON-TO-LEESON
Page 244 and 245:
CROSS REFERENCE MAGNETEK/A.O. SMITH
Page 246 and 247:
CROSS REFERENCE MAGNETEK/A.O. SMITH
Page 248 and 249:
CROSS REFERENCE W.W. GRAINGER/DAYTO
Page 250 and 251:
CROSS REFERENCE W.W. GRAINGER/DAYTO
Page 252 and 253:
DC SUB-FHP GEARMOTOR CROSS REFERENC
Page 254 and 255:
LEESON INDEX LEESON CATALOG NUMBER
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
LINCOLN INDEX LINCOLN CATALOG NUMBE
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
NOTES & SYMBOLS/HOW TO ORDER NOTES
Page 270 and 271:
model numbers defined G Electrical
Page 272 and 273:
TECHNICAL INFORMATION INFORMATION N
Page 274 and 275:
DIMENSIONS AC METRIC (IEC) MOTORS B
Page 276 and 277:
DIMENSIONS NEMA EXPLOSION-PROOF •
Page 278 and 279:
DIMENSIONS NEMA CAST IRON FRAME •
Page 280 and 281:
DIMENSIONS NEMA STEEL FRAME MOTORS
Page 282 and 283:
DIMENSIONS 5000 FRAME MOTORS C AB N
Page 284 and 285:
TERMS AND CONDITIONS TERMS & COND.
Page 286 and 287:
MECANICAL WARNINGS AND CAUTIONS IMP
Page 288 and 289:
Power Transmission solutions for ev
Page 290 and 291:
800 Series Gear Reducers Built For
Page 292 and 293:
HIGH EFFICIENCY GEAR REDUCERS Grove
Page 294 and 295:
WASHGUARD GEAR REDUCERS & GEAR+MOTO
Page 296 and 297:
Pulley’s & Sheaves INDUSTRY STAND
Page 298 and 299:
NOTES 300 Specifications are subjec
Page 300:
How to achieve the greatest energy
show all

LEESON / LINCOLN Motor Catalog - Norfolkbearings.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?