oXYgen Scanning Application User Guide Addendum - Kodak
oXYgen Scanning Application User Guide Addendum - Kodak
oXYgen Scanning Application User Guide Addendum - Kodak
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Direct Mount<br />
Originals are mounted in the scanner by placing them directly on the Base<br />
glass. You can mount one original for single preview or several originals for<br />
multi-preview.<br />
Single preview<br />
To perform a single preview, do the following:<br />
1. Tape the original to the Base glass, placing the top right corner of the original near the 0,0<br />
corner of the glass (lower right corner). iQsmart 3 users should pay attention to the 12”<br />
border.<br />
2. Place transparencies emulsion side down and reflectives image side down.<br />
NOTE: If your original is in a non-standard format, you should note the size of the original by<br />
checking the vertical and horizontal scales of the glass. This is important when using the Layout<br />
display window.<br />
NOTE: When scanning a thick reflective such as a book, it is recommended that you scan with<br />
the Top door open.<br />
NOTE: For high enlargements (greater than 800% at 12dpm), we recommend you to use oil<br />
when mounting originals. For more information, refer to the iQsmart Oil Mounting Station<br />
(501L3R318).<br />
NOTE: When using iQsmart 3 , make sure that the mask or image is aligned with zero (0) on<br />
both the x-axis and the y-axis. Please be aware of the gap between the border of the glass and<br />
the zero (0) on the y-axis.<br />
<strong>oXYgen</strong> <strong>Scanning</strong> <strong>Application</strong> - <strong>User</strong> <strong>Guide</strong> <strong>Addendum</strong> 17
Change language