ASA 0929 230/460V (60Hz) (3 HP) - Federal Fluid Power, Inc.
ASA 0929 230/460V (60Hz) (3 HP) - Federal Fluid Power, Inc.
ASA 0929 230/460V (60Hz) (3 HP) - Federal Fluid Power, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ASA</strong> <strong>0929</strong> <strong>230</strong>/<strong>460V</strong> (<strong>60Hz</strong>) (3 <strong>HP</strong>)<br />
A: - F: -<br />
B: - G: -<br />
C: - L: 28 in<br />
D: - W: -<br />
E: -<br />
Pspez [BTU/min°F]<br />
Cooling Performance*<br />
P [PSI]<br />
Pressure Drop<br />
92.570<br />
65.000<br />
74.056<br />
52.000<br />
55.542<br />
39.000<br />
37.028<br />
26.000<br />
18.514<br />
13.000<br />
40 80 120 160<br />
Qp [GPM]<br />
40 80 120 160<br />
Qp [GPM]<br />
Order Number Motor <strong>Power</strong> Current Protection Level Rotation Air Flow Noise Level Weight<br />
<strong>ASA</strong><strong>0929</strong>SA6C 3 <strong>HP</strong> 4.8 A IP 55 1200 RPM 8500 SCFM 91 db(A) 384.12 lbs<br />
Working pressure (static): 26 bar (370 PSI)<br />
Radiator material: Aluminium<br />
Copyright 2008 asa hydraulik GmbH
<strong>ASA</strong> <strong>0929</strong> <strong>230</strong>/<strong>460V</strong> (<strong>60Hz</strong>) (7.5 <strong>HP</strong>)<br />
A: - F: -<br />
B: - G: -<br />
C: - L: 32 in<br />
D: - W: -<br />
E: -<br />
Pspez [BTU/min°F]<br />
Cooling Performance*<br />
P [PSI]<br />
Pressure Drop<br />
116.110<br />
65.000<br />
92.888<br />
52.000<br />
69.666<br />
39.000<br />
46.444<br />
26.000<br />
23.222<br />
13.000<br />
40 80 120 160<br />
Qp [GPM]<br />
40 80 120 160<br />
Qp [GPM]<br />
Order Number Motor <strong>Power</strong> Current Protection Level Rotation Air Flow Noise Level Weight<br />
<strong>ASA</strong><strong>0929</strong>SA6F 7.5 <strong>HP</strong> 11 A IP 55 1175 RPM 11450 SCFM 94 db(A) 468.16 lbs<br />
Working pressure (static): 26 bar (370 PSI)<br />
Radiator material: Aluminium<br />
Copyright 2008 asa hydraulik GmbH
*Note – Cooling Performance<br />
The cooling performance mentioned in this homepage is conservative and measured at a test bench according to asa test procedures<br />
with oil type ISO VG 46 and presents a bases for your cooler selection regarding required cooling performance. Because there is no<br />
standard test procedure, tests used by other manufacturers might have different results. Due to different environment conditions the<br />
cooling performance can vary by +/- 15%.<br />
Therefore we recommend all coolers be checked under the system operating conditions. This is also true for vibrations and mechanical<br />
stress as well as for pressure peaks and thermal stress.<br />
General tolerance according to DIN 2768-g.<br />
The information contained in this homepage is intended to be used as a guideline only. Customers should always confirm the suitability<br />
of the information and these products in their particular applications. <strong>ASA</strong> assumes no liability for any errors, commissions or misprints<br />
and reserves the right to change products and details without prior notification.As we are constantly improving our products, the<br />
characteristics, dimensions and weights can also change, although we do our best to incorporate these changes continually.<br />
asa hydraulik of America <strong>Inc</strong>.<br />
160 Meister Avenue #20A<br />
Branchburg, NJ 08876<br />
Tel.: 800-473-9400<br />
Fax: 908-541-1550<br />
sales_US@asahydraulik.com<br />
www.asahydraulik.com<br />
Copyright 2008 asa hydraulik GmbH
TT 01 115V AC (0.03 <strong>HP</strong>)<br />
A: - F: -<br />
B: - G: -<br />
C: - L: -<br />
D: - W: -<br />
E: -<br />
Pspez [BTU/min°F]<br />
Cooling Performance*<br />
P [PSI]<br />
Pressure Drop<br />
0.380<br />
8.700<br />
0.304<br />
6.960<br />
0.228<br />
5.220<br />
0.152<br />
3.480<br />
0.076<br />
1.740<br />
1 3 4 5<br />
Qp [GPM]<br />
1 3 4 5<br />
Qp [GPM]<br />
Order Number Motor <strong>Power</strong> Current Protection Level Rotation Air Flow Noise Level Weight<br />
<strong>ASA</strong>0013UE03 0.03 <strong>HP</strong> 0.12 A IP 20 2650 RPM 70.6 SCFM 41 db(A) 3.08 lbs<br />
Working pressure (static): 26 bar (370 PSI)<br />
Radiator material: Aluminium<br />
Copyright 2008 asa hydraulik GmbH
*Note – Cooling Performance<br />
The cooling performance mentioned in this homepage is conservative and measured at a test bench according to asa test procedures<br />
with oil type ISO VG 46 and presents a bases for your cooler selection regarding required cooling performance. Because there is no<br />
standard test procedure, tests used by other manufacturers might have different results. Due to different environment conditions the<br />
cooling performance can vary by +/- 15%.<br />
Therefore we recommend all coolers be checked under the system operating conditions. This is also true for vibrations and mechanical<br />
stress as well as for pressure peaks and thermal stress.<br />
General tolerance according to DIN 2768-g.<br />
The information contained in this homepage is intended to be used as a guideline only. Customers should always confirm the suitability<br />
of the information and these products in their particular applications. <strong>ASA</strong> assumes no liability for any errors, commissions or misprints<br />
and reserves the right to change products and details without prior notification.As we are constantly improving our products, the<br />
characteristics, dimensions and weights can also change, although we do our best to incorporate these changes continually.<br />
asa hydraulik of America <strong>Inc</strong>.<br />
160 Meister Avenue #20A<br />
Branchburg, NJ 08876<br />
Tel.: 800-473-9400<br />
Fax: 908-541-1550<br />
sales_US@asahydraulik.com<br />
www.asahydraulik.com<br />
Copyright 2008 asa hydraulik GmbH
TT 01 12V DC (0.04 <strong>HP</strong>)<br />
A: - F: -<br />
B: - G: -<br />
C: - L: -<br />
D: - W: -<br />
E: -<br />
Pspez [BTU/min°F]<br />
Cooling Performance*<br />
P [PSI]<br />
Pressure Drop<br />
0.377<br />
7.980<br />
0.301<br />
6.384<br />
0.226<br />
4.788<br />
0.151<br />
3.192<br />
0.075<br />
1.596<br />
1 3 4 5<br />
Qp [GPM]<br />
1 3 4 5<br />
Qp [GPM]<br />
Order Number Motor <strong>Power</strong> Current Protection Level Rotation Air Flow Noise Level Weight<br />
<strong>ASA</strong>0013UD01 0.04 <strong>HP</strong> 0.3 A IP 20 2800 RPM 70.6 SCFM 44 db(A) 3.08 lbs<br />
Working pressure (static): 26 bar (370 PSI)<br />
Radiator material: Aluminium<br />
Copyright 2008 asa hydraulik GmbH
TT 01 24V DC (0.04 <strong>HP</strong>)<br />
A: - F: -<br />
B: - G: -<br />
C: - L: -<br />
D: - W: -<br />
E: -<br />
Pspez [BTU/min°F]<br />
Cooling Performance*<br />
P [PSI]<br />
Pressure Drop<br />
0.377<br />
7.980<br />
0.301<br />
6.384<br />
0.226<br />
4.788<br />
0.151<br />
3.192<br />
0.075<br />
1.596<br />
1 3 4 5<br />
Qp [GPM]<br />
1 3 4 5<br />
Qp [GPM]<br />
Order Number Motor <strong>Power</strong> Current Protection Level Rotation Air Flow Noise Level Weight<br />
<strong>ASA</strong>0013UD02 0.04 <strong>HP</strong> 0.15 A IP 20 2800 RPM 70.6 SCFM 44 db(A) 3.08 lbs<br />
Working pressure (static): 26 bar (370 PSI)<br />
Radiator material: Aluminium<br />
Copyright 2008 asa hydraulik GmbH
*Note – Cooling Performance<br />
The cooling performance mentioned in this homepage is conservative and measured at a test bench according to asa test procedures<br />
with oil type ISO VG 46 and presents a bases for your cooler selection regarding required cooling performance. Because there is no<br />
standard test procedure, tests used by other manufacturers might have different results. Due to different environment conditions the<br />
cooling performance can vary by +/- 15%.<br />
Therefore we recommend all coolers be checked under the system operating conditions. This is also true for vibrations and mechanical<br />
stress as well as for pressure peaks and thermal stress.<br />
General tolerance according to DIN 2768-g.<br />
The information contained in this homepage is intended to be used as a guideline only. Customers should always confirm the suitability<br />
of the information and these products in their particular applications. <strong>ASA</strong> assumes no liability for any errors, commissions or misprints<br />
and reserves the right to change products and details without prior notification.As we are constantly improving our products, the<br />
characteristics, dimensions and weights can also change, although we do our best to incorporate these changes continually.<br />
asa hydraulik of America <strong>Inc</strong>.<br />
160 Meister Avenue #20A<br />
Branchburg, NJ 08876<br />
Tel.: 800-473-9400<br />
Fax: 908-541-1550<br />
sales_US@asahydraulik.com<br />
www.asahydraulik.com<br />
Copyright 2008 asa hydraulik GmbH
<strong>ASA</strong> 0115 Hyd. Motor .73 Cu.In. 1000rpm (0.03<br />
<strong>HP</strong>)<br />
A: - F: -<br />
B: - G: -<br />
C: - L: -<br />
D: - W: -<br />
E: -<br />
Pspez [BTU/min°F]<br />
Cooling Performance*<br />
P [PSI]<br />
Pressure Drop<br />
4.960<br />
29.000<br />
3.968<br />
23.200<br />
2.976<br />
17.400<br />
1.984<br />
11.600<br />
0.992<br />
5.800<br />
13 25 38 50<br />
Qp [GPM]<br />
14 28 41 55<br />
Qp [GPM]<br />
Order Number Motor <strong>Power</strong> Current Protection Level Rotation Air Flow Noise Level Weight<br />
<strong>ASA</strong>0115AH12 0.03 <strong>HP</strong> - - 1000 RPM 370.65 SCFM 66 db(A) 52.8 lbs<br />
Working pressure (static): 26 bar (370 PSI)<br />
Radiator material: Aluminium<br />
Copyright 2008 asa hydraulik GmbH
<strong>ASA</strong> 0115 Hyd. Motor .73 Cu.In. 2000rpm (0.26<br />
<strong>HP</strong>)<br />
A: - F: -<br />
B: - G: -<br />
C: - L: -<br />
D: - W: -<br />
E: -<br />
Pspez [BTU/min°F]<br />
Cooling Performance*<br />
P [PSI]<br />
Pressure Drop<br />
9.100<br />
29.000<br />
7.280<br />
23.200<br />
5.460<br />
17.400<br />
3.640<br />
11.600<br />
1.820<br />
5.800<br />
13 25 38 50<br />
Qp [GPM]<br />
14 28 41 55<br />
Qp [GPM]<br />
Order Number Motor <strong>Power</strong> Current Protection Level Rotation Air Flow Noise Level Weight<br />
<strong>ASA</strong>0115AH12 0.26 <strong>HP</strong> - - 2000 RPM 706 SCFM 82 db(A) 52.8 lbs<br />
Working pressure (static): 26 bar (370 PSI)<br />
Radiator material: Aluminium<br />
Copyright 2008 asa hydraulik GmbH
<strong>ASA</strong> 0115 Hyd. Motor .73 Cu.In. 3000rpm (0.88<br />
<strong>HP</strong>)<br />
A: - F: -<br />
B: - G: -<br />
C: - L: -<br />
D: - W: -<br />
E: -<br />
Pspez [BTU/min°F]<br />
Cooling Performance*<br />
P [PSI]<br />
Pressure Drop<br />
11.600<br />
29.000<br />
9.280<br />
23.200<br />
6.960<br />
17.400<br />
4.640<br />
11.600<br />
2.320<br />
5.800<br />
13 25 38 50<br />
Qp [GPM]<br />
14 28 41 55<br />
Qp [GPM]<br />
Order Number Motor <strong>Power</strong> Current Protection Level Rotation Air Flow Noise Level Weight<br />
<strong>ASA</strong>0115AH12 0.88 <strong>HP</strong> - - 3000 RPM 1323.75 SCFM 90 db(A) 52.8 lbs<br />
Working pressure (static): 26 bar (370 PSI)<br />
Radiator material: Aluminium<br />
Copyright 2008 asa hydraulik GmbH
*Note – Cooling Performance<br />
The cooling performance mentioned in this homepage is conservative and measured at a test bench according to asa test procedures<br />
with oil type ISO VG 46 and presents a bases for your cooler selection regarding required cooling performance. Because there is no<br />
standard test procedure, tests used by other manufacturers might have different results. Due to different environment conditions the<br />
cooling performance can vary by +/- 15%.<br />
Therefore we recommend all coolers be checked under the system operating conditions. This is also true for vibrations and mechanical<br />
stress as well as for pressure peaks and thermal stress.<br />
General tolerance according to DIN 2768-g.<br />
The information contained in this homepage is intended to be used as a guideline only. Customers should always confirm the suitability<br />
of the information and these products in their particular applications. <strong>ASA</strong> assumes no liability for any errors, commissions or misprints<br />
and reserves the right to change products and details without prior notification.As we are constantly improving our products, the<br />
characteristics, dimensions and weights can also change, although we do our best to incorporate these changes continually.<br />
asa hydraulik of America <strong>Inc</strong>.<br />
160 Meister Avenue #20A<br />
Branchburg, NJ 08876<br />
Tel.: 800-473-9400<br />
Fax: 908-541-1550<br />
sales_US@asahydraulik.com<br />
www.asahydraulik.com<br />
Copyright 2008 asa hydraulik GmbH
<strong>ASA</strong> 0367 <strong>230</strong>/<strong>460V</strong> (<strong>60Hz</strong>) (0.5 <strong>HP</strong>)<br />
A: - F: -<br />
B: - G: -<br />
C: - L: 20.8 in<br />
D: - W: -<br />
E: -<br />
Pspez [BTU/min°F]<br />
Cooling Performance*<br />
P [PSI]<br />
Pressure Drop<br />
28.050<br />
42.000<br />
22.440<br />
33.600<br />
16.830<br />
25.200<br />
11.220<br />
16.800<br />
5.610<br />
8.400<br />
25 50 75 100<br />
Qp [GPM]<br />
25 50 75 100<br />
Qp [GPM]<br />
Order Number Motor <strong>Power</strong> Current Protection Level Rotation Air Flow Noise Level Weight<br />
<strong>ASA</strong>0367AA66 0.5 <strong>HP</strong> 0.95 A IP 55 1130 RPM 1659.1 SCFM 76 db(A) 138.6 lbs<br />
Working pressure (static): 26 bar (370 PSI)<br />
Radiator material: Aluminium<br />
Copyright 2008 asa hydraulik GmbH
<strong>ASA</strong> 0367 <strong>230</strong>/<strong>460V</strong> (<strong>60Hz</strong>) (0.75 <strong>HP</strong>)<br />
A: - F: -<br />
B: - G: -<br />
C: - L: 20.8 in<br />
D: - W: -<br />
E: -<br />
Pspez [BTU/min°F]<br />
Cooling Performance*<br />
P [PSI]<br />
Pressure Drop<br />
33.100<br />
42.000<br />
26.480<br />
33.600<br />
19.860<br />
25.200<br />
13.240<br />
16.800<br />
6.620<br />
8.400<br />
25 50 75 100<br />
Qp [GPM]<br />
25 50 75 100<br />
Qp [GPM]<br />
Order Number Motor <strong>Power</strong> Current Protection Level Rotation Air Flow Noise Level Weight<br />
<strong>ASA</strong>0367AA46 0.75 <strong>HP</strong> 1.25 A IP 55 1690 RPM 2118 SCFM 82 db(A) 130.9 lbs<br />
Working pressure (static): 26 bar (370 PSI)<br />
Radiator material: Aluminium<br />
Copyright 2008 asa hydraulik GmbH
<strong>ASA</strong> 0367 <strong>230</strong>/<strong>460V</strong> (<strong>60Hz</strong>) (1.5 <strong>HP</strong>)<br />
A: - F: -<br />
B: - G: -<br />
C: - L: 22 in<br />
D: - W: -<br />
E: -<br />
Pspez [BTU/min°F]<br />
Cooling Performance*<br />
P [PSI]<br />
Pressure Drop<br />
39.000<br />
42.000<br />
31.200<br />
33.600<br />
23.400<br />
25.200<br />
15.600<br />
16.800<br />
7.800<br />
8.400<br />
25 50 75 100<br />
Qp [GPM]<br />
25 50 75 100<br />
Qp [GPM]<br />
Order Number Motor <strong>Power</strong> Current Protection Level Rotation Air Flow Noise Level Weight<br />
<strong>ASA</strong>0367AA48 1.5 <strong>HP</strong> 2.3 A IP 55 1740 RPM 2884 SCFM 86 db(A) 141.02 lbs<br />
Working pressure (static): 26 bar (370 PSI)<br />
Radiator material: Aluminium<br />
Copyright 2008 asa hydraulik GmbH
*Note – Cooling Performance<br />
The cooling performance mentioned in this homepage is conservative and measured at a test bench according to asa test procedures<br />
with oil type ISO VG 46 and presents a bases for your cooler selection regarding required cooling performance. Because there is no<br />
standard test procedure, tests used by other manufacturers might have different results. Due to different environment conditions the<br />
cooling performance can vary by +/- 15%.<br />
Therefore we recommend all coolers be checked under the system operating conditions. This is also true for vibrations and mechanical<br />
stress as well as for pressure peaks and thermal stress.<br />
General tolerance according to DIN 2768-g.<br />
The information contained in this homepage is intended to be used as a guideline only. Customers should always confirm the suitability<br />
of the information and these products in their particular applications. <strong>ASA</strong> assumes no liability for any errors, commissions or misprints<br />
and reserves the right to change products and details without prior notification.As we are constantly improving our products, the<br />
characteristics, dimensions and weights can also change, although we do our best to incorporate these changes continually.<br />
asa hydraulik of America <strong>Inc</strong>.<br />
160 Meister Avenue #20A<br />
Branchburg, NJ 08876<br />
Tel.: 800-473-9400<br />
Fax: 908-541-1550<br />
sales_US@asahydraulik.com<br />
www.asahydraulik.com<br />
Copyright 2008 asa hydraulik GmbH
<strong>ASA</strong> 0115 <strong>230</strong>/<strong>460V</strong> (<strong>60Hz</strong>) (0.33 <strong>HP</strong>)<br />
A: - F: -<br />
B: - G: -<br />
C: - L: 16.9 in<br />
D: - W: -<br />
E: -<br />
Pspez [BTU/min°F]<br />
Cooling Performance*<br />
P [PSI]<br />
Pressure Drop<br />
7.375<br />
29.000<br />
5.900<br />
23.200<br />
4.425<br />
17.400<br />
2.950<br />
11.600<br />
1.475<br />
5.800<br />
13 26 40 53<br />
Qp [GPM]<br />
14 28 41 55<br />
Qp [GPM]<br />
Order Number Motor <strong>Power</strong> Current Protection Level Rotation Air Flow Noise Level Weight<br />
<strong>ASA</strong>0115AA44 0.33 <strong>HP</strong> 0.7 A IP 55 1700 RPM 880 SCFM 79 db(A) 56 lbs<br />
Working pressure (static): 26 bar (370 PSI)<br />
Radiator material: Aluminium<br />
Copyright 2008 asa hydraulik GmbH
<strong>ASA</strong> 0115 <strong>230</strong>/<strong>460V</strong> (<strong>60Hz</strong>) (1.5 <strong>HP</strong>)<br />
A: - F: -<br />
B: - G: -<br />
C: - L: 18.2 in<br />
D: - W: -<br />
E: -<br />
Pspez [BTU/min°F]<br />
Cooling Performance*<br />
P [PSI]<br />
Pressure Drop<br />
12.239<br />
29.000<br />
9.791<br />
23.200<br />
7.343<br />
17.400<br />
4.895<br />
11.600<br />
2.448<br />
5.800<br />
13 26 40 53<br />
Qp [GPM]<br />
14 28 41 55<br />
Qp [GPM]<br />
Order Number Motor <strong>Power</strong> Current Protection Level Rotation Air Flow Noise Level Weight<br />
<strong>ASA</strong>0115AA27 1.5 <strong>HP</strong> 2 A IP 55 3450 RPM 1860 SCFM 87 db(A) 70 lbs<br />
Working pressure (static): 26 bar (370 PSI)<br />
Radiator material: Aluminium<br />
Copyright 2008 asa hydraulik GmbH
*Note – Cooling Performance<br />
The cooling performance mentioned in this homepage is conservative and measured at a test bench according to asa test procedures<br />
with oil type ISO VG 46 and presents a bases for your cooler selection regarding required cooling performance. Because there is no<br />
standard test procedure, tests used by other manufacturers might have different results. Due to different environment conditions the<br />
cooling performance can vary by +/- 15%.<br />
Therefore we recommend all coolers be checked under the system operating conditions. This is also true for vibrations and mechanical<br />
stress as well as for pressure peaks and thermal stress.<br />
General tolerance according to DIN 2768-g.<br />
The information contained in this homepage is intended to be used as a guideline only. Customers should always confirm the suitability<br />
of the information and these products in their particular applications. <strong>ASA</strong> assumes no liability for any errors, commissions or misprints<br />
and reserves the right to change products and details without prior notification.As we are constantly improving our products, the<br />
characteristics, dimensions and weights can also change, although we do our best to incorporate these changes continually.<br />
asa hydraulik of America <strong>Inc</strong>.<br />
160 Meister Avenue #20A<br />
Branchburg, NJ 08876<br />
Tel.: 800-473-9400<br />
Fax: 908-541-1550<br />
sales_US@asahydraulik.com<br />
www.asahydraulik.com<br />
Copyright 2008 asa hydraulik GmbH
<strong>ASA</strong> 0115 12V DC (0.34 <strong>HP</strong>)<br />
A: - F: -<br />
B: - G: -<br />
C: - L: -<br />
D: - W: -<br />
E: -<br />
Pspez [BTU/min°F]<br />
Cooling Performance*<br />
P [PSI]<br />
Pressure Drop<br />
8.000<br />
20.310<br />
6.400<br />
16.248<br />
4.800<br />
12.186<br />
3.200<br />
8.124<br />
1.600<br />
4.062<br />
13 26 40 53<br />
Qp [GPM]<br />
13 26 40 53<br />
Qp [GPM]<br />
Order Number Motor <strong>Power</strong> Current Protection Level Rotation Air Flow Noise Level Weight<br />
<strong>ASA</strong>0115AD01 0.34 <strong>HP</strong> 19.4 A IP 68 2850 RPM 1094.3 SCFM 79 db(A) 27.06 lbs<br />
Working pressure (static): 26 bar (370 PSI)<br />
Radiator material: Aluminium<br />
Copyright 2008 asa hydraulik GmbH
<strong>ASA</strong> 0115 24V DC (0.34 <strong>HP</strong>)<br />
A: - F: -<br />
B: - G: -<br />
C: - L: -<br />
D: - W: -<br />
E: -<br />
Pspez [BTU/min°F]<br />
Cooling Performance*<br />
P [PSI]<br />
Pressure Drop<br />
8.000<br />
20.310<br />
6.400<br />
16.248<br />
4.800<br />
12.186<br />
3.200<br />
8.124<br />
1.600<br />
4.062<br />
13 26 40 53<br />
Qp [GPM]<br />
13 26 40 53<br />
Qp [GPM]<br />
Order Number Motor <strong>Power</strong> Current Protection Level Rotation Air Flow Noise Level Weight<br />
<strong>ASA</strong>0115AD02 0.34 <strong>HP</strong> 9.7 A IP 68 2850 RPM 1094.3 SCFM 79 db(A) 27.06 lbs<br />
Working pressure (static): 26 bar (370 PSI)<br />
Radiator material: Aluminium<br />
Copyright 2008 asa hydraulik GmbH
*Note – Cooling Performance<br />
The cooling performance mentioned in this homepage is conservative and measured at a test bench according to asa test procedures<br />
with oil type ISO VG 46 and presents a bases for your cooler selection regarding required cooling performance. Because there is no<br />
standard test procedure, tests used by other manufacturers might have different results. Due to different environment conditions the<br />
cooling performance can vary by +/- 15%.<br />
Therefore we recommend all coolers be checked under the system operating conditions. This is also true for vibrations and mechanical<br />
stress as well as for pressure peaks and thermal stress.<br />
General tolerance according to DIN 2768-g.<br />
The information contained in this homepage is intended to be used as a guideline only. Customers should always confirm the suitability<br />
of the information and these products in their particular applications. <strong>ASA</strong> assumes no liability for any errors, commissions or misprints<br />
and reserves the right to change products and details without prior notification.As we are constantly improving our products, the<br />
characteristics, dimensions and weights can also change, although we do our best to incorporate these changes continually.<br />
asa hydraulik of America <strong>Inc</strong>.<br />
160 Meister Avenue #20A<br />
Branchburg, NJ 08876<br />
Tel.: 800-473-9400<br />
Fax: 908-541-1550<br />
sales_US@asahydraulik.com<br />
www.asahydraulik.com<br />
Copyright 2008 asa hydraulik GmbH