yacht and shipbuilding - Hamel

3. PrOFileS
Hamel metaal carries a very wide range of profiles in various alloys and sizes, which are used in the ship and luxury yacht
building industry. Standard profiles such as flat bars, pipes and tubes, as well as solid round, square and hexagonal bars.
Special profiles can be produced to your specific requirements in a wide range of shapes and alloys. In addition, we can
supply all profiles specifically developed for shipbuilding, including deck profiles - bulb and T-profile.
Alloy angle flat round square hexagon t u Z bulb rectangular tube
tube
en Aw - 5059 Alustar ® x x
(AlMg5.5MnZnZr)
en Aw - 5083 (AlMg4.5Mn0.7) x x x x
en Aw - 6060 (AlMgSi0.5) x x x x x x x x
en Aw - 6082 (AlSi1MgMn) x x x x x x x x x x x
4. PrOCeSSing
We offer a wide range of processing options for both plate and profiles. Depending on the alloy
and desired material shape, various options are possible. Our product specialists can provide
you with detailed information on this.
> Sawing (rectangular plate and contour cutting)
> Decoiling
> Milling (plate to thickness)
> Grinding (plate)
> Welding
> Filming (single-sided / double-sided)
> Anodising (natural in various layer thicknesses)
> Cutting (profiles and bars)
> Coating (sheets and profiles in various RAL colours)
The following table gives a schematic presentation of the suitability of the various alloys
with regard to hard/decorative anodising, machining and welding.
Alloy (hard) anodising decorative anodising machining welding
en Aw - 5059 (AlMg5.5MnZnZr) very good moderate good good
en Aw - 5083 (AlMg4.5Mn0.7) very good moderate good good
en Aw - 5754 (AlMg3) very good moderate reasonable good
en Aw - 6060 (AlMgSi0.5) very good good reasonable good
en Aw - 6082 (AlSi1MgMn) very good moderate good good