QEP Master Tools Catalog - Porta-Nails

Porta-Nailer HammerheadPORTA-NAILS10YEARWARRANTYPortamatic Hammerhead TLPORTA-NAILS10YEARWARRANTYPortamatic EvolutionPORTA-NAILSPrPr10YEARWARRANTYPoweredPowered®®• 5/8", 3/4" & 33/32" domestic solid wood flooring• 3/8" to 9/16" solid wood flooring (40230 Accessory shoe required)• 1/2" to 9/16" engineered wood flooring (40230 Accessory shoe required)• 5/8" bamboo flooring (40248 Accessory shoe required)SPECIFICATIONSOperating PressureFastener Capacity 100Fastener StyleManual16 Ga “T” Cleats• Blind nail 3/8" - 33/32" and face nail tongue and groove flooringusing interchangeable shoe attachments• Multi-hit minimizes fatigue while providing greater impact andfloor tightness - no need to hit tool hard• Ratcheting ram allows for single or multi-hit, guaranteeing nailsare properly set every time• Includes extension handle, mallet, angled shoe for 5/8" - 33/32"tongue and groove flooring, wrenches and rugged carrying case402A 16 Ga Manual Floor Nailer (1/cs)40225 Face Nail Shoe40230 Thin Flooring Shoe (3/8" to 9/16" solid wood floors)40248 Bamboo Flooring Shoe (5/8" horizontal or vertical grain)• 1/2" to 3/4" domestic solid wood flooring• 1/2" solid & engineered wood flooringSPECIFICATIONSOperating PressureFastener Capacity 150Fastener Style• Taller handle yields less back fatigue• Mallet activated to ensure the tightest floor possible• Integrated safety prevents accidental firing• Includes mallet, wrenches, pneumatic lubricant, safety goggles,an easy to convert reversible shoe base for nailing 1/2" and 3/4"flooring, swivel air inlet connector and carrying case470A 16 Ga Floor Nailer (1/cs)47395 Pre finished Flooring Shoe, Wide Profile (9/16" to 3/4")(Order part #47090 for Original model #470)SPECIFICATIONSOperating PressureFastener Capacity 110Fastener Style418A90 psi @ 4.2 cfm16 Ga “T” & “L” Cleats80 psi @ 3.8 cfm18 Ga “L” Cleats• Unique ram design can be hit at any angle to get closer to the wall• Cam operated height adjustment• Quick access to the valve and main piston• Safety mechanism is built into the base of the tool18 Ga Floor Nailer (1/cs)Not recommended for stranded bamboo products• 3/8" to 3/4" engineered wood, solid wood, & bamboo flooring• 3/8" to 5/8" stranded or woven bamboo productsNot recommended for stranded bamboo productsTILE CARPET WOOD VINYL UNDERLAYMENT MASONRY TROWELS BLADES & KNIFES TAPE & FILM TEAR-OUT CEILING59