California Products and Application Procedures ... - House of kolor

GENERAL INFORMATION
Below is a brief description of all components that currently meet both VOC rules for SCAQMD’s Rule 1151 and SJVAQMD’s Rules 4602 & 4612 Phase II if used as
outlined in Appendix “A” of this technical manual.
IMPORTANT NOTES (PLEASE READ AND UNDERSTAND)
• ALL OF THE COMPONENTS LISTED BELOW CANNOT BE SPRAYED ALONE AND MUST BE MIXED INTO OTHER PRODUCTS PRIOR TO APPLICATION.
• FOLLOW ALL MIXING AND APPLICATION PROCEDURES AS OUTLINED IN THIS MANUAL UNDER APPENDIX “A”.
• IF YOU ARE HAVING TROUBLE UNDERSTANDING ANY OF THE DIRECTIONS IN THIS TECH MANUAL, PLEASE CALL OUR TECH SUPPORT LINE
AT (800) 844-4130.
KV1 KOSMIC KONVERTOR
KV1 Kosmic Konvertor is an additive for Shimrin ® base coats and was developed to effectively lower the VOC’s of House of Kolor's Shimrin ® Base Coats to meet the
VOC limits of 3.5 lbs / gal VOC for SCAQMD Rule 1151 and SJVAQMD Rule 4602 & 4612 Phase II. This is accomplished by using low molecular weight urethane
resins and exempt solvents thereby increasing the solids of our Shimrin base coats and lowering the VOC to 3.5 lbs / gal or lower. KV1 replaces the reducer in most
Shimrin ® products.
(See KV1 Kosmic Konvertor Technical Data Sheet In This Manual)
REDUCERS
House of Kolor ® reducers were specifically designed to be used in our products only. UNDER NO CIRCUMSTANCES use other manufacturers reducers in House of
Kolor ® products. (For more information, refer to the tech data sheet in the main manual)
The below chart gives you the recommended temperature range and VOC information.
Reducer Recommended Temperature (°F) Actual VOC (lbs./gal.) Actual VOC (grams/liter)
RU300 65 to 85 0 0
RU310 65 to 75 5.85 702.0
RU311 75 to 85 7.28 874.0
RU312 85 to 95 7.42 890.0
RU313 95 to 110 6.57 788.0
RU315 This is a retarded and must be
used sparingly
7.85 941
CATALYSTS (HARDENERS)
House of Kolor's Hardeners are specifically designed to be used in our Shimrins / KV1mix kandy’s, klear’s and sealers. They’re designed with the specific hydroxyl
groups needed for proper cross-linking with our resins used in the manufacture our products. DO NOT use other manufacturers hardeners in House of Kolor’s
products. (For more information, refer to the tech data sheet in the main manual)
The below chart gives you the recommended temperature range and VOC information.
Hardener Recommended Temperature (°F) Actual VOC (lbs./gal.) Actual VOC (grams/liter)
KU150 65 to 85 0 0
KU151 85 to 110 0 0
Based upon the size of object being painted and shop conditions will determine which hardener to us.
KE170 KRATOR ELIMINATOR
KE170 is a fisheye additive that does not need to be used in every coat. Use KE170 to correct fisheye or crater defects. (For more information, refer to the tech data
sheet in the main manual)
CAUTION: May not correct major silicone contamination. In that case, use a silicone oil - which will be required throughout the job.
USING KRATOR ELIMINATOR (KE170)
Add 1/2 - 2 capfuls of KE170 Krator Eliminator per mixed quart.
Use only when necessary. Once the problem is corrected you do not need to continue using KE170.
ACTUAL VOC INFORMATION: 6.94 lbs/gal (832 g/L)
COMPONENT TECHNICAL DATA
(APPENDIX "A")
Rule 1151 & Rules 4602 & 4612 Phase II
99