California Products and Application Procedures ... - House of kolor
California Products and Application Procedures ... - House of kolor
California Products and Application Procedures ... - House of kolor
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DRY TIME<br />
Allow dry time before K<strong>and</strong>y or clear is applied (usually about 60 minutes <strong>and</strong> not longer than 2 hours). Topcoat within 2 hours or apply USG100 Intercoat Barrier<br />
Klear.<br />
FLASH TEST - AT 5 TO 7 MINUTES YOU WILL FEEL THE FINISH TO BE TACKY BUT NOT TRANSFERING TO YOUR FINGER. DO TEST AT THE TAPE EDGE AS<br />
FINGER PRINTING IS POSSIBLE. AT 1 HOUR THE FINISH WILL FEEL DRY TO THE TOUCH.<br />
Monitor closely for maximum merging <strong>of</strong> coats<br />
ARTWORK & INTERCOAT CLEAR<br />
DO NOT TAPE DIRECTLY ONTO THIS SHIMRIN ® BASECOAT. If artwork is planned, apply 1 or 2 medium coats <strong>of</strong> USG100 Intercoat Barrier Klear. The clear coat will<br />
protect the Shimrin ® Base from tape marks <strong>and</strong> allow cleanup <strong>of</strong> mistapes. PLEASE REFER TO SANDING GRIT RECOMMENDATIONS FOR FINAL SANDING<br />
INTERCOAT BARRIER KLEAR. See tech sheet for more information on USG100 Intercoat Barrier Klear. NOTE: DO NOT SAND SHIMRIN ® METALLIC<br />
BASES DIRECTLY. Apply USG100 Intercoat Barrier Klear for base coat protection if s<strong>and</strong>ing is required. If you directly s<strong>and</strong> the Shimrin ® metallic, you must re-base.<br />
NOTE: USG100 Intercoat Barrier Klear is designed to protect the base coats for artwork tape-outs <strong>and</strong> blends only. DO NOT USE USG100 AS A BUILD-UP OR<br />
TOPCOAT CLEAR, AS IT IS NOT WEATHER RESISTANT. CAUTION: Shimrin ® Base coats do not have any chemical resistance until cleared. Final<br />
wash solvents will effect base coats. Use KC20 Post S<strong>and</strong>ing Cleaner for cleanup.<br />
KANDY COAT (optional)<br />
Shimrin ® BC <strong>and</strong> FBC Bases / KV1 Mix may be K<strong>and</strong>ied with Urethane enamel. See appropriate tech sheets for K<strong>and</strong>y application. For artwork, our K<strong>and</strong>y<br />
Koncentrates may be mixed with SG150 / KV1 Intercoat Karrier Mix up to 10% to meet the 3.5 lbs/gal VOC rule for K<strong>and</strong>y graphics. See KK & SG150 tech sheets<br />
for more information<br />
KLEAR COAT<br />
ALL SHIMRIN ® BC AND FBC BASES MUST BE CLEAR-COATED. We recommend that you use <strong>House</strong> <strong>of</strong> Kolor ® clears for best results. See appropriate tech sheets<br />
for more information on clear coat application.<br />
ADDITIONAL INFORMATION<br />
Shimrin ® BC <strong>and</strong> FBC Bases may be intermixed for hundreds <strong>of</strong> color combinations. BC <strong>and</strong> FBC Bases may also be mixed with other SHIMRIN ® ’s ® , including the<br />
Designer Pearls, Neons, <strong>and</strong> Graphic Kolors. The possibilities are endless. Create your own one-<strong>of</strong>-a-kind custom finish.<br />
Shimrin ® Pearl <strong>and</strong> Metallic Bases may also be added, in small amounts (no more than 25%), directly to the UC35 / KK K<strong>and</strong>y mix to ease touch-ups or for additional<br />
creative effects. Simply catalyze <strong>and</strong> mix by volume as usual.<br />
CLEAN UP<br />
Clean equipment thoroughly with lacquer thinner or urethane reducer (check local regulations).<br />
TECHNICAL DATA (See Low VOC Data Sheet For Specific Values For Each Product)<br />
• BC Series<br />
• Coatings Category: Color Coating<br />
• Actual VOC RTS less exempt solvents: 1.75 lbs./gal. (209.4 g/L) max.<br />
• Regulatory VOC RTS less exempt compounds: 3.29 lbs./gal. (395.2 g/L) max.<br />
• Density: 8.52 lbs./gal. (1022.0 g/L) (Max. VOC Color)<br />
• Weight % Volatiles: 68.4%<br />
• Weight % exempt compounds: 47.9%<br />
• Weight % water: 0%<br />
• FBC Series<br />
• Coatings Category: Color Coating<br />
• Actual VOC RTS less exempt solvents: 1.85 lbs./gal. (221.4 g/L) max.<br />
• Regulatory VOC RTS less exempt compounds: 3.39 lbs./gal. (407.0 g/L) max.<br />
• Density: 8.63 lbs./gal. (1035.0 g/L) (Max. VOC Color)<br />
• Weight % Volatiles: 68.8%<br />
• Weight % exempt compounds: 47.4%<br />
• Weight % water: 0%<br />
HEALTH AND SAFETY<br />
BC & FBC SHIMRIN ® METALLIC BASES<br />
(APPENDIX "A")<br />
Rule 1151 & Rules 4602 & 4612 Phase II<br />
IMPORTANT The contents <strong>of</strong> this package have to be blended with other components before the product can be used. Before opening the packages, be sure you underst<strong>and</strong><br />
the warning messages on the labels <strong>of</strong> all components, since the mixture will have the hazards <strong>of</strong> all its parts. Improper spray technique may result in a hazardous condition.<br />
Follow spray equipment manufacturer’s instructions to prevent personal injury or fire. Follow directions for respirator use. Wear eye <strong>and</strong> skin protection. Observe all applicable<br />
precautions.<br />
See Material Safety Data Sheet <strong>and</strong> Labels for additional safety information <strong>and</strong> h<strong>and</strong>ling instructions.<br />
69
Change language