California Products and Application Procedures ... - House of kolor

Recommendations

Info

KOSMIC REDUCERS, THINNERS, & HARDENERS (continued) THINNERS Thinners for Kustom Kolor ® Acrylic Lacquers: Kustom Thinners 101 HI-GLOSS and 202 FAST DRY are the finest thinners you can buy at any price. The thinner carries the paint to the surface, then evaporates from the paint film. The way the thinner leaves the film determines the flow, tack free time, consistency, shrinkage, leveling, dry time, tape time and final gloss. Choose the thinner best suited to your shop conditions and the size of the object to be sprayed. Our thinners are not cross referenced by any other paint company. 38 RU101 HI-GLOSS RU202 FAST DRY SLOW DRY FAST DRY Shop Temperature Above 75°F Shop Temperature Below 75°F For large objects or in extreme hot or humid conditions. With slow dry thinner, proper air movement is necessary to pull the thinner from the paint. For small objects or cool shop conditions. NOTE: Use RU315 Retarder to slow dry times or for force drying. NOTE: These thinners may also be intermixed for varying conditions. DO NOT MIX KUSTOM THINNERS WITH THINNERS MADE BY OTHER MANUFACTURERS. MIXING Always measure when mixing. There is little room for guess work in custom painting. For mixing ratios of reducers and thinners, refer to the individual product instructions. ADDITIONAL INFORMATION KOSMIC KOLOR ® BASES, KANDYS & CLEAR COATS: Follow label instructions on reduction amounts. For increased flow out, add additional reducer. House of Kolor ® paint products are thicker in the can than others and the additional reducer gives you more coverage per quart and also increases flow out. Usually 3 ounces per mixed quart is adequate. SHIMRIN ® UNIVERSAL BASES: Extra reducer should not be used in the Shimrin ® Universal Bases. When Shimrin ® 's are used with a complete lacquer paint job, they may be thinned with lacquer thinner (in place of Kosmic Reducer). INTERCOAT CLEAR: Reducers in Intercoat Clear should be as fast as can comfortably be used. This will lesson dry time and allow artwork tape outs as soon as possible (usually within the hour, depending upon shop and weather conditions). HARDENERS House of Kolor's Hardeners are specifically designed to be used in our urethane kandys, klears, and sealers. They're designed with the specific hydroxyl groups needed for proper cross-linking with our resins used in the manufacturing of our products. NEVER USE OTHER MANUFACTURERS' HARDENERS WITH HOUSE OF KOLOR ® PRODUCTS. THEY ARE NOT FORMULATED TO WORK WITH THE EXOTIC RESINS WE USE TO PRODUCE THE HIGH QUALITY KUSTOM FINISHES THAT ARE DESIGNED FOR THE EXTREME PERFORMANCE REQUIREMENTS OF KUSTOM FINISHING. • KU100 Catalyst was designed for areas where VOC compliance is not an issue. It is a faster curing activator. • KU150 Exempt Catalyst was designed to meet all VOC regulations. This is a medium curing activator. • KU151 Exempt Hi-Temp Flo-Catalyst was designed to meet all VOC regulations. It is an excellent activator where high humidity and temperatures are present and also greatly improves flow out of our clears. This is an excellent choice where larger objects are being finished, as well as being used in the final flow coating of clears. This is a slower curing version of our KU150. NOTE: With the exception of your sealer, never use a slower curing hardener in a finish or underneath a finish using a faster curing hardener. Example: Using KU151 in the kandy and then KU100 in the clear. This could cause solvent to become trapped in the overall finish. KU100 Catalyst KU150 Exempt Catalyst KU151 Exempt Hi-Temp Flo-Catalyst • UK Kandy's • UC35 Klear (for 3.5 VOC compliance) • UFC35 Klear (for 4.3 VOC compliance) • UC01 Klear • UFC01 Flo-Klear • UK Kandy's • UC35 Klear • UFC35 Klear • UFC19 Klear • UCC01 Klear • UC01 Klear • UFC01 Flo-Klear • Ko-Seal ® II Sealers • UK Kandy's • UC35 Klear • UFC35 Klear • UFC19 Klear • UCC01 Klear • UC01 Klear • UFC01 Flo-Klear KNOW AND UNDERSTAND YOUR LOCAL VOC LAWS BEFORE CHOOSING THE REDUCERS AND HARDENERS THAT WILL BE USED IN YOUR PAINT JOB.
GENERAL INFORMATION At last a fisheye additive that does not need to be used in every coat. Use KE170 to correct fisheye or crater defects. Works with lacquer, urethane, polyurethane, acrylic urethane, acrylic enamel, etc. A must have product for your paint shop. NOTE: Do individual testing with other company’s paint products. CAUTION: May not correct major silicone contamination. In that case, use a silicone oil - which will be required throughout the job. 1. USING KRATOR ELIMINATOR (KE170) Add 1/2 - 2 capfuls of KE170 Krator Eliminator per mixed quart. Use only when necessary. Once the problem is corrected you do not need to continue using KE170. NOTE: KE170 is a very unique product that works in ALL coatings to reduce fisheyes. KE170 KRATOR ELIMINATOR NOTES 39
Page 3 and 4:
HOUSE OF KOLOR ® DIGITAL KOLOR SHA
Page 5 and 6:
HOUSE OF KOLOR ® DIGITAL KOLOR SHA
Page 7 and 8:
KS10 - WHITE SEALER KS12 - METALLIC
Page 9 and 10:
UK02 - LIME GOLD over BC02 UK04 - O
Page 11 and 12:
MF02 - SILVER MINI FLAKE over BC25
Page 13 and 14: IP03 - ICE RED PEARL over BC25 IP01
Page 15 and 16: KOP2 - MAPLE-NUT KAMELEON OPAL over
Page 17 and 18: DP30 - TURQUOISE DRY PEARL over BC2
Page 19 and 20: U12 - SILVER STRIPING ENAMEL U23 -
Page 21 and 22: UK11 and UMF01 - ULTRA GOLD MINI FL
Page 23 and 24: SCREAMING YELLOW Kreator: Craig Fra
Page 25: SPECIALTY PRODUCTS: HOUSE OF KOLOR
Page 28 and 29: MATERIAL AND USAGE RECOMMENDATIONS
Page 30 and 31: 4 KD2000 DIRECT TO METAL EPOXY PRIM
Page 32 and 33: 6 BASECOAT SYSTEM CODE KS10 OR KS21
Page 34 and 35: 8 MBC SHIMRIN ® METAJULS METALLIC
Page 36 and 37: 10 PBC SHIMRIN ® DESIGNER PEARLS G
Page 38 and 39: 12 NE SHIMRIN ® NEON GENERAL INFOR
Page 40 and 41: 14 SG SHIMRIN ® GRAPHIC KOLORS & B
Page 42 and 43: 16 KBC SHIMRIN ® KANDY BASECOATS G
Page 44 and 45: 18 MC KOSMIC KROME ® GENERAL INFOR
Page 46 and 47: 20 MC00 KOSMIC KROME ® MIRROR REFL
Page 48 and 49: UK KOSMIC KOLOR ® URETHANE ENAMEL
Page 50 and 51: 24 KK INTENSIFIER KANDY KONCENTRATE
Page 52 and 53: GENERAL INFORMATION SG150 Intercoat
Page 54 and 55: 28 UFC35 KOSMIC URETHANE FLO-KLEAR
Page 56 and 57: 30 UFC19 URETHANE KOMPLY KLEAR ® I
Page 58 and 59: 32 11. FINISHING AND POLISHING •
Page 60 and 61: UC01 KOSMIC ACRYLIC URETHANE KLEAR
Page 62 and 63: SC01 KOSMIC KOLOR ® SUNSCREEN ACRY
Page 66 and 67: AX01 ACCELERATOR 40 GENERAL INFORMA
Page 68 and 69: DP, DR DRY PEARLS PP PASTE PEARLS K
Page 70 and 71: IP ICE PEARL 44 GENERAL INFORMATION
Page 72 and 73: F, MF, UMF FLAKES 46 GENERAL INFORM
Page 74 and 75: U KOSMIC KOLOR ® URETHANE STRIPING
Page 76 and 77: HH HI-HEAT BLACK 50 GENERAL INFORMA
Page 78 and 79: KC20 POST SANDING CLEANER 52 GENERA
Page 80 and 81: POLISHING & FINISHING INSTRUCTIONS
Page 82 and 83: MATERIAL ORDERING GUIDE (continued)
Page 84 and 85: TECH TIPS SANDPAPER GRADING SYSTEMS
Page 86 and 87: VOC INFORMATION (continued) PRODUCT
Page 88 and 89: California Products and Application
Page 90 and 91: GUN SET UP • HVLP Gun = 10 PSI at
Page 92 and 93: CLEAN UP Clean equipment thoroughly
Page 94 and 95: 68 GENERAL INFORMATION Shimrin ® M
Page 96 and 97: 70 GENERAL INFORMATION Shimrin ® M
Page 98 and 99: 72 GENERAL INFORMATION Shimrin ® D
Page 100 and 101: 74 GENERAL INFORMATION SHIMRIN ® N
Page 102 and 103: 76 GENERAL INFORMATION Shimrin ® S
Page 104 and 105: 78 GENERAL INFORMATION Kandy Base C
Page 106 and 107: 80 GENERAL INFORMATION Kameleon ®
Page 108 and 109: KV1 KOSMIC KONVERTOR (APPENDIX "A")
Page 110 and 111: USG100 INTERCOAT BARRIER KLEAR (APP
Page 112 and 113: UC35 KOSMIC ACRYLIC URETHANE KLEAR
Page 114 and 115:
UFC35 KOSMIC URETHANE FLO-KLEAR (AP
Page 116 and 117:
UMC35 KOS-MATTE KLEAR COLOR SANDING
Page 118 and 119:
SG150 INTERCOAT PEARL & FLAKE KARRI
Page 120 and 121:
UFC19 URETHANE KOMPLY KLEAR ® II (
Page 122 and 123:
94 UC25 / KK URETHANE KANDY MIX RAT
Page 124 and 125:
96 UC25 / KK URETHANE KANDY MIX RAT
Page 126 and 127:
UC25 KOSMIC KANDY KARRIER (APPENDIX
Page 128 and 129:
AX01 ACCELERATOR Accelerator AX01 i
Page 130 and 131:
GENERAL INFORMATION KC20 POST SANDI
Page 132 and 133:
ITEM NUMBER PRIMERS & SEALERS VOC O
Page 134 and 135:
ITEM NUMBER VOC OF COMPONENTS AS PA
Page 136 and 137:
ITEM NUMBER KANDY KONCENTRATES VOC
Page 138 and 139:
ITEM NUMBER FLAKES VOC OF COMPONENT
Page 140 and 141:
% Water by Weight % Exempt Compound
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150:
ITEM NUMBER DESCRIPTION CATEGORY MI
show all

California Products and Application Procedures ... - House of kolor

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?