EU and EC air handling units - Invento PRO

More documents

Recommendations

Info

ControlMaster ®control when demands are high»ControlMaster ® is a complete integrated control system for FläktWoods units. The equipment is supplied installed for complete aswell as block divided air handling units.fans to give the lowest SFP v -figure. A simpleyet effective solution that saves time.ControlMaster ® is the perfect solution forsmall systems with basic control equipmentas well as for large systems with demandson data communications and an integratedcontrol system.ControlMaster ® conforms to EU directives(MD, EMC and LVD) and is CE marked.Easy selectionControlMaster ® is easy to select using theproduct selection program. The programautomatically selects the control equipmentfor the unit you have chosen. Shunts areselected for the air heaters or air coolerschosen. Frequency inverters are selectedtogether with the motors, drive systems andFast track installationNot only do you save time during the projectdesign stage but also during installation.ControlMaster ® is complete and requires nomajor on site electrical installation.The control equipment is ready for commissioningas soon as the unit is installed.A packaged solutionIn our workshop great importance is givento test running and the inspection of eachcontrol system before delivery, to assure thehighest quality.ControlMaster ® is a complete package:• Air handling unit• Purpose designedcontrol equipment• Commissioning of the unit byqualified personnel16
Clear lines of responsibilityWhen two or more different suppliers areinvolved in the same plant installationthere can often be problems. ControlMaster ®solves this problem.Fläkt Woods will supply you with a completeplant including air handling unit andcontrol equipment with just one guarantee forthe lot. ControlMaster ® is a total solution withfull responsibility from a partner you can trust.High qualityTo install a control system for a high qualityair handling unit requires knowledge andexperience of how air conduction is affected.ControlMaster ® has been designed by the sameteam that designed EC 2000 with focus ondesign details that give a low SFP v figure,small leakage and low noise. All cables arerouted in a self-extinguishing halogen freeflexible conduit with rubber seals, insidethe unit.Electronic equipment is protected andseparated from the air stream by a galvanisedsheet metal panel. A design built to workand last for a long time.Cooler fully operational cooling unit»Cooler is the complete, fullyoperational cooling unit for airhandling units.A factory-made module fully adapted to theunit and which is supplied complete withcontrol equipment. The function andperformance of each cooling module is runin a special test rig before delivery.Standardised models give assured functionat a competitive price – not to mention thetime saved during design and installation!It is also very competitive when comparedwith other cooling systems.Fast installationThe cooler is supplied complete with automationand control equipment and is factorytested. All that needs to be done on site is toconnect the mains supply, connect the temperaturecontrol signal and fit the drainage pipe.Safe and economical operationThe cooler is safe in operation. Optimisedco-ordination of the refrigeration system tothe EU and EC air handling units, combinedwith thoroughly proven and documentedtechnical design, is the key to reliability.What's more the cooling unit is efficient andeconomical. The wide range of cooling outputstages ensures optimised cooling capacity.Easy project designNo in-depth refrigeration competence isnecessary to carry out the project design work.Selection is made automatically in theproduct selection programs for PC, quicklyand simply. The product selection programhas built in safeguards to ensure a ‘correct’selection and provides a comprehensiveprintout with full performance details.Environmentally appropriatetechnologyUsing environmentally friendly design isone of the cornerstonesof the corporate philosophyof Fläkt Woods.Development workfocused on finding adesign solution thatprovides the highestpossible energy recovery,minimised environmentalimpact and themost energy efficientoperation. This workhas resulted in theperfect choice ofmaterials and design.Cooler is available in sixEU-unit sizes, 20 to 32.For EC-units in sevensizes, 03 to 09 with acooling output up to124 kW.17
Page 1: FläktEU and EC air handling unitsG
Page 6 and 7: A full selection of sizescovering a
Page 11 and 12: Highly efficient heat recovery»The
Page 13 and 14: systems often run at airflow rates
Page 15: What is the operating cost?The oper
Page 19 and 20: Easy to install and straightforward

EU and EC air handling units - Invento PRO

Create successful ePaper yourself

Delete template?

Save as template?