System Solutions Fieldbus & Remote I/O - Electromach BV
System Solutions Fieldbus & Remote I/O - Electromach BV
System Solutions Fieldbus & Remote I/O - Electromach BV
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>System</strong> <strong>Solutions</strong><strong>Fieldbus</strong> & <strong>Remote</strong> I/O<strong>Electromach</strong> member of the R.STAHL Technology Group<strong>System</strong> <strong>Solutions</strong> For <strong>Fieldbus</strong> And <strong>Remote</strong> I/ODifferent applications and requirements nowadays lead to use ofseveral generations of field devices - 4...20mA, HART, Profibus DPor Foundation <strong>Fieldbus</strong> H1.Besides, mechanical concepts must be adapted to applications andenvironmental conditions.STAHL develops in cooperation with its customers a range of optimumcomponents and technologies to be applied as well as theirmechanical implementation.As a result we have a system for all applications and requirements.IS1 Ethernet <strong>Remote</strong> I/O andFoundation <strong>Fieldbus</strong> H1 Field Barriers<strong>Remote</strong> I/O, <strong>Fieldbus</strong> And Asset Management Integration, Also In Zone 1- Combination of FF H1 with <strong>Remote</strong> I/O for integration of fieldbus devices as well as conventional sensorsand actuators- The first zone-1 <strong>Remote</strong> I/O with industrial Ethernet 100 Mbit connection - seamless and easy integrationinto the standard Ethernet structures of systems- Support of universal Modbus TCP as well as of the future technologies FF HSE and PROFINET- <strong>System</strong> solutions all from one source: all field signals in one station - easy planning, installation,maintenance- Certified DTM devices with condition monitoring for safe and trouble-free integration into FDTModern <strong>Solutions</strong> For Zone 1: Panel PC With MS Windows XP And 19“ Touch-screen- Panel PC of the Open HMI series- Universal, robust and easy to service – applicable internationally in zones 1, 21, 2, 22 and in the shipbuildingindustry (DNV)- Data exchange via inherently safe connection (Ex op is) and common Ethernet protocols: Modbus TCP,PROFINET and FF HSE- On-site operation and access to asset management and engineering informationOpen HMI ET 456<strong>Electromach</strong> B.V.Jan Tinbergenstraat 1937559 SP HengeloThe NetherlandsT +31 (0)74 2 472 472F +31 (0)74 2 435 925info@electromach.nlwww.electromach.comBank: ABN-AMRO 59.01.14.573IBAN: NL29ABNA0590114573BIC: ABNANL2AVAT/BTW: NL 003578458B01Bank: Fortis 24.35.24.439IBAN: NL67FTSB0243524439BIC: FTSBNL2RXXXKVK nr: 06040491Leveringen geschiedenovereenkomstig de voorwaarden.Deliveries subject to generalconditions of sale.
<strong>Electromach</strong> member of the R.STAHL Technology GroupEx i Field Device Coupler For 4 / 8 Ex i/FISCO Field Devices Series 9411- Compact 4 / 8-channel <strong>Fieldbus</strong> barrier for Foundation <strong>Fieldbus</strong> H1 and Profibus PA- Integrated power management for low start-up current (soft start) and short-circuit currentlimitation- Earth bus for comfortable connection of earthing for the field devices- Individual LED indications for power and spurs to enable easy on-site diagnosis- Built-in or external terminal resistor- Installation in Zone 1Digital I/O Coupler For 8 Ex i Contacts And 4 Ex i Solenoid Valves Series 9413- For Foundation <strong>Fieldbus</strong> H1 2-wire or 4-wire design versions- Operation at FISCO <strong>Fieldbus</strong> or High Energy Trunk is possible- High control power for common Ex i solenoid valves- Extensive functionality with FF function blocks DI, DO, MDI, MDO, AI (frequencies), CI(counters) and logic transducer block- Installation in Zone 1Advanced <strong>Fieldbus</strong> Power Supply Series 9412- For simple or redundant supply of FF H1 segments with high output power 28 V / 500 mA- Special boost mode for parallel supply with up to 1 A- Integrated Advanced diagnosis for bus parameter monitoring: current/voltage, signal level,noise, jitter and asymmetry- Adjustable warning level, message about changes of the bus parameters via contact- Diagnosis interface to download current bus parameters using standard Windows tools<strong>Fieldbus</strong> Power Supply <strong>System</strong> FF H1 Series 9412+9419- For simple or redundant supply of FF H1 segments- High output power 28 V / 500 mA- Special boost mode for parallel supply with up to 1 A- Basic diagnosis to monitor power supplyfailure, overload and short-circuit using LED and signaling contact- Optionally installation on a DIN rail or special bus carriers- Host-specific adapted bus carriers for up to 8 <strong>Fieldbus</strong> power suppliesEx i Field Device CouplerDigital I/O CouplerAdvanced <strong>Fieldbus</strong> Power Supply<strong>Fieldbus</strong> Power SupplyNotes:____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________<strong>Electromach</strong> B.V.Jan Tinbergenstraat 1937559 SP HengeloThe NetherlandsT +31 (0)74 2 472 472F +31 (0)74 2 435 925info@electromach.nlwww.electromach.comBank: ABN-AMRO 59.01.14.573IBAN: NL29ABNA0590114573BIC: ABNANL2AVAT/BTW: NL 003578458B01Bank: Fortis 24.35.24.439IBAN: NL67FTSB0243524439BIC: FTSBNL2RXXXKVK nr: 06040491Leveringen geschiedenovereenkomstig de voorwaarden.Deliveries subject to generalconditions of sale.
Change language