New Product Bulletin - November 2012, 25324 - Clipsal

StarServe Data HomeDistribution UnitCentralised and simpleAdding to the current range of StarServe Enclosures is Clipsal's locallydesigned, moulded plastic enclosure. It has been specifically designedfor National Broadband Network (NBN) equipment and your homenetworking equipment, all within the one enclosure.Having all equipment housed within the one enclosure provides aconvenient location to centralise your home networking solution.Product SpecificationsDimensions – 750mm (h) x 405mm (w) x 150mm (d)Cut-out dimensions – 760mm (h) x 415mm (w)3105PEN7440All equipment in picture is for illustration purposesonly and not supplied with the enclosure.Product Features• Made from moulded plastic(White Electric colour)• Wi-Fi network compatible• Multi-use flexibility - gear trayis supplied unpopulated(except for small StarServerack) to allow installers to installwhatever product they require• Designed to house NBNequipment and additionalnetworking products, suchas StarServe data and phonepatch panels• Two key locks on door forlimiting access, uses matchingkey (CL001)• Suitable for surface or semiflushmounting• Flush mounting flange suppliedas standard• Removable hinged door withcaptive door hinges• Vented door (top and bottom)• Removable, moulded plastic,full length gear tray withmoulded grid lines• Cut-out provisions on topand bottom of enclosure formounting a GPO• Zoned areas on rear of thegear tray using removableplastic segregation channels,one at top, one at bottom ofenclosure• Pre-cut hole section on reargear tray to allow for coaxcables to connect to MATVequipment• Redesigned StarServemounting rack included• Pre-drilled holes in sidesof enclosure to aid in fixinginto wall• Rear of enclosure bodypopulated with 20mm and25mm knockouts to allow foreasy cable entry• Gear tray made of plastic• Four additional mountingturrets on rear of enclosure forgear tray mounting• Parts pack including blankingplugs for mounting screws andtwo keys for door locksCustomer Benefits• Constructed from plasticensuring that it is Wi-Finetwork friendly• Moulded plastic; enclosureis non-conductive and doesnot require Earthing. If poweroutlets (GPOs) are installed -they will still require Earthingas per Australian Standards• White Electric colour ensuresproduct will blend in with otherelectrical accessories• Enough space to fit all NBNproduct plus additionalequipment• Only one enclosure requiredfor all installations, surface orflush mount• Pre-drilled holes in sides ofenclosure to aid in mounting• Rear of enclosure bodypopulated with 20mm and25mm knockouts to allowfor easy cable entryCatalogue Numbers3105PEN7440ABS Enclosure Home DistributionUnit12