New Product Bulletin - November 2012, 25324 - Clipsal

More documents

Recommendations

Info

Conext XW Series SystemControl PanelFor devices connected to the Xanbus-enabled networkThe XW Series System Control Panel (SCP) is used to program andinterface with the XW Series of Inverter/Charger and Solar ChargeControllers. The SCP features a graphical, backlit LCD display thatprovides system configuration and diagnostic information for devicesconnected to the Xanbus-enabled network. Navigation between theprogramming menus is via the tactile push-buttons located on the unit.The System Control Panel is physically the same as the GT SystemControl Panel, but that is where the similarities stop. They featuredifferent firmware and are not interchangeable.Product Features• Connects to XW Series ofInverters, Chargers or SolarCharge Controllers• Central time controller for thesolar system• LCD display shows statusat a glance• Audible alarm for faultcondition• Indoor use onlyCatalogue Numbers865-1050XW Series System Control Panel865-1050Conext XW SeriesAuto Generator StartIntelligence for generator managementThe Conext XW Series Auto Generator Start (AGS) will automaticallyactivate a generator to provide a Conext XW Inverter/Charger withpower to recharge a depleted battery bank or provide additional powerfor heavy loads. The AGS adds intelligence to generator management,thereby eliminating time spent monitoring batteries and inverter loads.It does this by continuously monitoring the battery voltage, state-ofcharge,or the inverter charge mode; starting and stopping the generatorwhen the battery needs additional charging. The AGS will also start thegenerator to assist the system’s XW Inverter/Charger(s) when outputpower demands are high.Product Features• The Auto Generator Startconnects to Xanbus-enabledXW systems• Works with a.c. or d.c.generators, with 2-wire or3-wire start controls• Preserves AGS settings even ifthe network power is removedCatalogue Numbers865-1060XW Series Auto Generator Start865-106020
Conext XW Series AccessoriesFor flexibility and reliabilityThe Conext XW Series Conduit Box (CB) and the Battery TemperatureSensor (BTS) are designed for use with the XW Series. The CB can beused to create systems larger than two inverters, or to retrofit Conext XWInverters/Chargers into existing systems. The BTS mounts on the batteryto measure the temperature and is used by the Conext XW Inverter/Charger and the Solar Charge Controller. The BTS is supplied with a leadlength of 10.7m (35ft).Product Features• Conduit Box Dimensions229mm x 406mm x 210mm• Conduit Box Weight4.6kg• BTS Cable Length10.7m (35ft)Catalogue Numbers865-1025XW CB Conduit Box130-0004-03-01XW Battery Temperature Sensor865-1025130-0004-03-0121
Page 4 and 5: Impress Push-ButtonSwitches & Dimm
Page 6 and 7: Push-Button and RotaryControlled Un
Page 8 and 9: Deep Plastic Wall Box157/1PRMDElect
Page 10 and 11: DALIinfinity Soft Wiring 5 PoleUnr
Page 12 and 13: StarServe Data HomeDistribution Uni
Page 14 and 15: C-Bus ®A new mounting solutionSurf
Page 16 and 17: C-Bus ®Wireless BatteryOperated Wa
Page 18 and 19: Xantrex GT SeriesSystem Control Pa
Page 22 and 23: 56 Series Deep Base/Cover Switch(5
Page 24: NEW PRODUCTS AT A GLANCEStrato 8000

New Product Bulletin - November 2012, 25324 - Clipsal

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?