New Product Bulletin - November 2012, 25324 - Clipsal

More documents

Recommendations

Info

StarServe Data HomeDistribution UnitCentralised and simpleAdding to the current range of StarServe Enclosures is Clipsal's locallydesigned, moulded plastic enclosure. It has been specifically designedfor National Broadband Network (NBN) equipment and your homenetworking equipment, all within the one enclosure.Having all equipment housed within the one enclosure provides aconvenient location to centralise your home networking solution.Product SpecificationsDimensions – 750mm (h) x 405mm (w) x 150mm (d)Cut-out dimensions – 760mm (h) x 415mm (w)3105PEN7440All equipment in picture is for illustration purposesonly and not supplied with the enclosure.Product Features• Made from moulded plastic(White Electric colour)• Wi-Fi network compatible• Multi-use flexibility - gear trayis supplied unpopulated(except for small StarServerack) to allow installers to installwhatever product they require• Designed to house NBNequipment and additionalnetworking products, suchas StarServe data and phonepatch panels• Two key locks on door forlimiting access, uses matchingkey (CL001)• Suitable for surface or semiflushmounting• Flush mounting flange suppliedas standard• Removable hinged door withcaptive door hinges• Vented door (top and bottom)• Removable, moulded plastic,full length gear tray withmoulded grid lines• Cut-out provisions on topand bottom of enclosure formounting a GPO• Zoned areas on rear of thegear tray using removableplastic segregation channels,one at top, one at bottom ofenclosure• Pre-cut hole section on reargear tray to allow for coaxcables to connect to MATVequipment• Redesigned StarServemounting rack included• Pre-drilled holes in sidesof enclosure to aid in fixinginto wall• Rear of enclosure bodypopulated with 20mm and25mm knockouts to allow foreasy cable entry• Gear tray made of plastic• Four additional mountingturrets on rear of enclosure forgear tray mounting• Parts pack including blankingplugs for mounting screws andtwo keys for door locksCustomer Benefits• Constructed from plasticensuring that it is Wi-Finetwork friendly• Moulded plastic; enclosureis non-conductive and doesnot require Earthing. If poweroutlets (GPOs) are installed -they will still require Earthingas per Australian Standards• White Electric colour ensuresproduct will blend in with otherelectrical accessories• Enough space to fit all NBNproduct plus additionalequipment• Only one enclosure requiredfor all installations, surface orflush mount• Pre-drilled holes in sides ofenclosure to aid in mounting• Rear of enclosure bodypopulated with 20mm and25mm knockouts to allowfor easy cable entryCatalogue Numbers3105PEN7440ABS Enclosure Home DistributionUnit12
110 Punchdown ToolAdding to the current range of terminating tools for the Datacommsrange of connectors, Clipsal has released a new 110 Punchdown Tool.110PDT has all the necessary features and benefits that is required bythe installer to perform the task at hand.110PDT2-Core Jumper WireClipsal has changed the metre roll length of its two lines of Jumper Wire,due to customer demand in a progressive market. The red/white andgreen/white jumper wire is now supplied in 400m reels. The productspecifications and price (per metre) have not changed.Product Features• Indented sides for fingercomfort• Reversable blade for cuttingand non-cutting• Hi-Lo impact options• Extra blade housing facility• Bladelocking systemcompatible with Clipsal’sspare 110 Blade (TRJ45PDTB)Customer Benefits• Slim design for installercomfort• Clean cutting blade• Replaceable blade• Durable construction• “CUT” indicated clearly toindentify cutting side of bladeCatalogue Numbers110PDT110 Punchdown ToolCatalogue Numbers2T4CIRW5Core Jumper Wire Red/White400m Reel2T4CIGW5Core Jumper Wire Green/White400m Reel2T4CIRW5Foxtel Connectors & ToolsTo enhance its existing FOXTEL product offer, Clipsal has releasedFOXTEL approved compression connectors and compression tools. Thesetermination products, when used with our FOXTEL Approved CoaxialCables, (3105RG6Q3B and 3105RG11Q3R) will allow you to supply andterminate compliant cabling for FOXTEL commercial installations.Compression connectors• RG6 connectors are available in either installer sized packs or a smallerpack for domestic installers. The 3105RG6CC10 pack includes 10connectors, whereas the 3105RG6CC50 pack includes 50 connectors.• RG11 connectors are also available for commercial installation fit-offs.The 3105RG11CC pack includes two connectors.Compression toolsClipsal offers two styles of compression tool, one for economy and one forprofessional use.• The Economy Compression Tool 3105RG6CCT for domestic FOXTELinstallers using RG6 cable, is suitable for use with 3105RG6CC10 and3105RG6CC50.• The Professional Compression Tool 3105RG6/11CCT is suitable forcommercial installers using RG6 and RG11 cables, and can be used with3105RG6CC10, 3105RG6CC50 and 3105RG11CC.Catalogue Numbers3105RG6CC10RG6 Compression Connector 10Pk3105RG6CC50RG6 Compression Connector 50Pk3105RG11CCRG11 Compression Connector 2Pk3105RG6CCTEconomy Compression Tool3105RG6/11CCTProfessional Compression Tool3105RG6/11CCT3105RG11CC3105RG6CC103105RG6CCT13
Page 4 and 5: Impress Push-ButtonSwitches & Dimm
Page 6 and 7: Push-Button and RotaryControlled Un
Page 8 and 9: Deep Plastic Wall Box157/1PRMDElect
Page 10 and 11: DALIinfinity Soft Wiring 5 PoleUnr
Page 14 and 15: C-Bus ®A new mounting solutionSurf
Page 16 and 17: C-Bus ®Wireless BatteryOperated Wa
Page 18 and 19: Xantrex GT SeriesSystem Control Pa
Page 20 and 21: Conext XW Series SystemControl Pane
Page 22 and 23: 56 Series Deep Base/Cover Switch(5
Page 24: NEW PRODUCTS AT A GLANCEStrato 8000

New Product Bulletin - November 2012, 25324 - Clipsal

Create successful ePaper yourself

Delete template?

Save as template?