Table of Contents - Rainbow Precision Products, Inc.

Synchro-Link ® Minimum Plain BoreTiming Belt Pulleys3/8 Inch Pitch (L) for 1" Wide BeltsPulley List No. ofTypeNo. PriceTeethNominal DimensionsWt. ∆Pitch Pulley Flange Bore (Approx.)Dia. OD OD E L H MPB Max. Lbs.1.0" (100) F Dimension = 1-1/4"P13L100.3 11.70 6F 13 1.552 1.522 1-25/32 1-1/4 1-3/4 1-1/8 3/8 3/4 .70P13L100.5 11.70 6F 13 1.552 1.522 1-25/32 1-1/4 1-3/4 1-1/8 1/2 3/4 .70P14L100 11.65 6F 14 1.671 1.641 1-15/16 1-1/4 1-3/4 1-7/16 3/8 3/4 .80P15L100.5 13.75 6F 15 1.790 1.760 2-1/32 1-1/4 1-3/4 1-1/2 1/2 3/4 .85P15L100.6 13.75 6F 15 1.790 1.760 2-1/32 1-1/4 1-3/4 1-1/2 5/8 3/4 .85P15L100.7 13.75 6F 15 1.790 1.760 2-1/32 1-1/4 1-3/4 1-1/2 3/4 3/4 .85P16L100 12.50 6F 16 1.910 1.880 2-3/16 1-1/4 1-7/8 1-7/16 1/2 1 1.10P17L100 13.15 6F 17 2.029 1.999 2-9/32 1-1/4 1-7/8 1-1/2 1/2 1-1/8 1.20P18L100 14.65 6F 18 2.149 2.119 2-3/8 1-1/4 1-7/8 1-9/16 1/2 1-3/16 1.10P19L100 15.55 6F 19 2.268 2.238 2-1/2 1-1/4 1-7/8 1-5/8 1/2 1-3/16 1.60P20L100 15.60 6F 20 2.387 2.357 2-5/8 1-1/4 1-7/8 1-11/16 1/2 1-1/4 1.80P21L100 15.95 6F 21 2.507 2.477 2-47/64 1-1/4 1-15/16 1-7/8 5/8 1-5/16 1.80P22L100 21.20 6F 22 2.626 2.596 2-7/8 1-1/4 2 2 5/8 1-1/2 2.00P24L100 22.95 6F 24 2.865 2.835 3-1/8 1-1/4 2 2-1/4 5/8 1-5/8 2.50P26L100 24.70 6F 26 3.104 3.074 3-3/8 1-1/4 2-1/8 2-9/16 5/8 1-7/8 3.30P28L100 25.60 6F 28 3.342 3.312 3-5/8 1-1/4 2-1/4 2-13/16 5/8 2 3.60P30L100 28.20 6F 30 3.581 3.551 3-13/16 1-1/4 2-1/4 2-15/16 5/8 2-1/8 4.00P32L100 30.90 6F 32 3.820 3.790 4-1/16 1-1/4 2-1/4 3-1/8 5/8 2-7/8 4.40P14 and P16 have one (1) set screw. Other sizes have no set screw.∆ Weights shown are approximate, are based on mid-range bore size, and in some cases may be calculated.Dimensions shown are for reference purposes only, and are subject to change without notice.Where space requirements are critical, consult Bando for certified specifications.Preventative MaintenanceProperly designed drives – V-belt or synchronous –are virtually maintenance free providing some simplerules for proper installation and maintenance areadhered to.The pay-off in “preventative maintenance” asopposed to “corrective maintenance” is maximum beltand sheave or pulley life, increased “up-time” andefficient, uninterrupted equipment and process service.Refer to the Installation and Tensioning Informationon pages 116 and 117 of this Catalog or for a morecomprehensive guide to proper drive installation andmaintenance, request Bando publication BU-106(shown) or consult your Bando sales representative, toschedule a “PM” seminar.96