OPERATING ANd INSTALLATION INSTRUCTIONS - Stiebel Eltron

More documents

Recommendations

Info

6.1 Technical Data and SpecificationsModel SBB 300 S SBB 400 SItem No. 221219 221222ContentsStorage capacity Gal / l 80.6 / 305 108.6 / 411Volume of heat exchanger, top Gal / l N/A N/AVolume of heat exchanger, bottom Gal / l 2.7 / 10.1 2.9 / 11.3PressureWorking pressure PSI / bar 150 / 10 150 / 10Tested to pressure PSI / bar 217 / 15 217 / 15Max. pressure of boiler loop PSI / bar 150 / 10 150 / 10TemperatureMax. temperature lower loop °F / °C 203 / 95 203 / 95Max. temperature of upper loop °F / °C N/A N/AHeat exchangerSurface area heat exchanger top sq in / m 2 N/A N/ASurface area heat exchanger bottom sq in / m 2 2,325 / 1.5 2,635 / 1.7WeightsTank weight empty lb. / kg 292 / 133 371 / 169Tank weight full lb. / kg 988 / 448 1,304 / 591OtherStandby losses in 24 hours BTU / kWh 6,500 / 1.9 7,500 / 2.2Cold/hot water connectionfor 1” copper pipe with adapters, provided with unitModel SBB 300 PLUS SBB 400 PLUS SBB 600 PLUSItem no. 187873 187874 187875ContentsStorage capacity Gal / l 80.6 / 305 108.6 / 411 162.9 / 617Volume of heat exchanger, top Gal / l 1.9 / 7.3 2.2 / 8.2 2.5 / 9.6Volume of heat exchanger, bottom Gal / l 2.7 / 10.1 2.9 / 11.3 3.5 / 13.2PressureWorking pressure PSI / bar 150 / 10 150 / 10 150 / 10Tested to pressure PSI / bar 217 / 15 217 / 15 217 / 15Max. pressure of boiler loop PSI / bar 150 / 10 150 / 10 150 / 10TemperatureMax. temperature lower loop °F / °C 203 / 95 203 / 95 203 / 95Max. temperature of upper loop °F / °C 203 / 95 203 / 95 203 / 95Heat exchangerSurface area heat exchanger top sq in / m 2 1705 / 1.1 2,015 / 1.3 2945 / 1.9Surface area heat exchanger bottom sq in / m 2 2325 / 1.5 2,635 / 1.7 3875 / 2.5WeightsTank weight empty lb. / kg 339 / 154 412 / 187 544 / 247Tank weight full lb. / kg 988 / 448 1,362 / 618 1,955 / 887OtherStandby losses in 24 hours BTU / kWh 6,500 / 1.9 7500 / 2.2 10,000 / 2.9Cold/hot water connectionfor 1” copper pipe with adapters, provided with unit6 | SBB S & SBB PLUS SOLAR STORAGE TANKS WWW.STIEBEL-ELTRON-USA.COM
2DimensionsENGLISHType SBB 300 S / Plus SBB 400 S / Plus SBB 600 PlusA Height of unit w/insulation in/mm 66.1/1679 72.7/1848 68.3/1735B Height of unit without insulation in/mm 63.3/1609 70.1/1781 65.7/1670C Height of well for temp. sensor in/mm 46.4/1179 48.7/1238 46.9/1192D Height thermometer in/mm 41.1/1045 43.0/1093 41.5/1055E Height spare port in/mm 40.3/1025 42.4/1078 40.9/1040F Height of well for temp. sensor in/mm 21.9/557 22.0/560 23.4/595G Height inspection flange in/mm 14.4/365 14.4/367 15.9/405H Height cold water feed in/mm 2.9/73 2.6/65 2.0/50I Height solar cold feed in/mm 11.0/280 11.1/282 10.9/277J Height solar hot return in/mm 34.0/865 34.1/867 33.9/862K Height heater hot boiler return in/mm 38.4/975 44.5/1130 42.9/1089L Height circulation port in/mm 52.7/1339 63.0/1600 57.2/1453M Height cold boiler feed in/mm 52.7/1339 63.0/1600 57.2/1453N Overall height in/mm 67.08/1704 73.74/1873 69.29/1760O Width without thermal insulation in/mm 21.65/550 23.62/600 29.52/750P Width with thermal insulation in/mm 27.55/700 29.52/750 36.22/920WWW.STIEBEL-ELTRON-USA.COM SBB S & SBB PLUS SOLAR STORAGE TANKS | 7
Page 1 and 2: ENGLISHOPERATING AND INSTALLATION I
Page 3 and 4: 2. SAFETY INSTRUCTIONSENGLISHGenera
Page 5: 5. FAILURES - CAUSES - CORRECTIONEN
Page 9 and 10: 8. SET-UP AND INSTALLATIONENGLISH8.
Page 11 and 12: 5LEGENDTBC 1 = ball valve withinteg
Page 13 and 14: 9. TEMPERATURE & PRESSURE RELIEF VA
Page 15: 10. WARRANTYENGLISHSubject to the t

OPERATING ANd INSTALLATION INSTRUCTIONS - Stiebel Eltron

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?