TraceTek Multiple Channel Alarm Module - California Detection ...

TTG Multiple Channel Alarm ModuleInternal Module FunctionsA BC D E F G HRESETABCDEFTerminal stripConnects the four wires from a sensing cable to channel inalarm module.Test buttonInitiates test of individual channel functions.Channel SettingsDIP switches determine setting for the channel:- one switch turns power for channel on or off- three switches adjust for sensing cable typeALARM indicator LEDRed LED illuminates on channel which has detected thepresence of liquid (a leak).CONTINUITY fault indicator LEDYellow LED illuminates on channel which has detected acable break—a loss of continuity in the sensing circuit.STATUS indicator LED• Illuminates green on channel powered and connected toalarm circuitry• Illuminates red on channel powered but disconnectedfrom alarm circuitry (with switch G)• Off on unused channel (turned off with DIP switch C)GStatus switchConnects/disconnects channel from alarm circuitry.IHIMaster reset buttonResets alarm circuitry.Alarm relaysRelay contacts allow actuation of optional remote alarm devices.Approval InformationISO 9001RLISTEDRaychem CorporationCommercial & IndustrialInfrastructure Division300 Constitution DriveMenlo Park, CA 94025-1164Tel (800) 545-6258Fax (800) 611-2323www.raychem.comThe TTG module is UL Listed for use in Class I Division 2, Groups A, B, C, and D HazardousLocations. TraceTek sensing cables connected to the module may be located in Class I Division 1,Groups A, B, C, and D Hazardous Locations.TypicalSystemTTGLeader or jumper cableOrdinary area orClass I, Div. 2Hazardous LocationThe TraceTek products group is a part of Raychem Chemelex Division.Chemelex Division is ISO 9001 certified.Ordinary area orClass I, Div. 2 Hazardous Location orClass I, Div. 1 Hazardous LocationTraceTek sensing cableAll information, including illustrations, is believed to be reliable. Users, however, should independently evaluate thesuitability of each product for their application. Raychem makes no warranties as to the accuracy or completeness ofthe information, and disclaims any liability regarding its use. Raychem’s only obligations are those in the RaychemStandard Terms and Conditions of Sale for this product, and in no case will Raychem be liable for any incidental,indirect, or consequential damages arising from the sale, resale, use, or misuse of the product. Specifications aresubject to change without notice. In addition, Raychem reserves the right to make changes—without notification toBuyer—to materials or processing that do not affect compliance with any applicable specification.© 1987, 1996 Raychem Corporation Printed in USA H53053 11/96 TraceTek is a trademark of Raychem Corporation.