DYNOmiteTM Dynamometer – Accessories Catalog - Land and Sea

Cigarette Lighter RPM Pick-Up for automotive chassis dyno celltesting. Most dynamometer operators will enjoy the convenience ofreading engine RPM by simply plugging into the vehicle’s “cigarettelighter” (12-volt auxiliary power outlet). This new pick-up’s signalamplifier and filter circuitry extracts the engine RPM from inductive(“ignition noise”) pulses induced into the vehicle’s 12-volt wiring bythe spark plug coil’s firing. This sophisticated pick-up works on most(although not all) spark ignition applications. (Requires DYNOmiteEEPROM version 9.533 or later.)Part # 430-145Diesel Fuel Rail RPM Pickup Kit can be used for mechanicallyinjected diesel applications that lack a convenient (or a suitable)electronic tachometer signal output. This kit includes a clamp-onpiezoelectric fuel injector rail transducer. In use, the high-pressureexpansion pulses that occur (per revolution) in a diesel injector’smetal fuel lines are detected and conditioned by the kit’s amplifiermodule. The square-wave output is then cleanly readable via theDYNOmite’s standard Engine RPM channel.Part # 430-194 (with clamp for ¼" fuel rails)Part # 430-196 (with clamp for 6mm fuel rails)2008 - Specifications subject to change without notice; for details call (603) 226-DYNO or www.land-and-sea.com43