DYNOmiteTM Dynamometer – Accessories Catalog - Land and Sea

DYNOmite – Air and Fuel Flow Meters6Quit guessingFind more HpLog cortical infoAdaptable to mosttypes of enginesBuy as you needMultiple ranges offlow are availableAccurate resultsAffordablewww.land-and-sea.comMonitor every engine’s air and fuel flow to determine itsefficiency and tune for the optimum power air/fuel ratio.“Don’t tune in the dark; knowing your engine’s BSAC andBSFC can save you time (and maybe the engine itself)!”Air Flow Meter Turbines for measuring the intake airflow ofautomotive, recreational, and industrial engines. These low inertiaturbines measure the intake airflow either directly (inline with asingle carburetor) or through a plenum (to dampen intake pulsations).Turbines are available in sizes to accommodate a wide range of airhorn sizes and CFM requirements. Multiple turbines may be run inparallel to reach higher flows. (Requires Data Channel ExpansionUnit part #430-454 and DYNO-MAX software equipped PC.)Part # 430-803 (3" 0-50 cfm)Part # 430-804 (4" 3-100 cfm)Part # 430-806 (6-1/2" 10-800 cfm)Part # 430-809 (9" 20-1200 cfm)Fuel Flow Transducer (BSFC) provides the vital Brake SpecificFuel Consumption information required by serious engine builders.By comparing BSFC to industry standards you can more easilydiagnose engine problems. Used in conjunction with exhaust gastemperature data, it’s possible to tune the engine to peak power withless danger of leaning it to the point of meltdown. Each kit includes aflow transducer, hoses, mounting hardware, and additional EEPROMsoftware functionality code. Using DYNO-MAX, pairs of turbinesmay be run in parallel – to read higher flows – or run in an A-Bconfiguration to subtract a fuel injection system’s return line flow.(Requires appropriate Full Function Harness and current EEPROMupgrade.)Part # 430-350 (standard flow transducer for 0.5 - 56 GPH linear range)Part # 430-352 (low flow transducer for 0.18 - 12 GPH range)