PUBLIKATSIOONID 2007 - Tallinna Tehnikaülikooli raamatukogu

PUBLIKATSIOONIDKüttner, R., Karjust, K., Pohlak, M. The design and production technology of largecomposite plastic products // Proceedings of the Estonian Academy of Sciences.Engineering. 13 (2007) 2, p. 117-128.* Loosaar, J., Parve, T., Tordik, A., Truuts, T. Emissions from Estonian oil shalepower plants // Proceedings of CEM 2007 : 8 th International Conference on EmissionMonitoring : Dübendorf (Switzerland), September 5 th –6 th 2007. Dübendorf : EMPA,2007. p. 322-327.* Lõhmus, R., Hussainova, I., Leinberg, S., Aarik, J., Tarre, A., Lõhmus, A. In-situstudy of TiO2 thin-films mechanical behavior under loading // Proceedings ofMaterial Research Society Spring Meeting : April 9–13, 2007, San Francisco, CA,USA. San Francisco , 2007.* Lõun, K., Riives, J., Otto, T. E-manufacturing as a web-based decision-makingsupport for collaborating SME-s in machine-building cluster // Annals of DAAAMfor 2007 & proceedings of the 18 th International DAAAM Symposium : IntelligentManufacturing & Automation : Focus on Creativity, Responsibility, and Ethics ofEngineers : Zadar (Croatia), 24–27 th October 2007. Vienna : DAAAM International,2007. p. 427-428.* Majak, J., Küttner, R., Pohlak, M. Symbolic-numerical algorithm for materialparameters identification // ASMDO : First International Conference onMultidisciplinary Design Optimization and Applications : 17–20 April 2007,Besancon, France. Besancon : ASMDO, 2007.Majak, J., Pohlak, M., Küttner, R. A simple algorithm for formability analysis //Journal of achievements in materials and manufacturing engineering. 22 (2007) 1, p.57-60.Majak, J., Pohlak, M., Küttner, R. An algorithm for localised and diffuse neckinganalysis // International journal of computational materials science and surfaceengineering. 1 (2007) 4, p. 494-508.* Matsi, B., Otto, T., Roosimölder, L. Innovation capacity estimation in productdevelopment // Manufacturing : Focus on the Future : IMC 24 : The InternationalManufacturing Conference : 29 th –31 th August 2007, Irland. 2. [S.l.] : GeminiInternational Limited, 2007. p. 703-710.* Matsi, B., Otto, T., Sarkans, M., Roosimölder, L. Method for increasing innovationcapacity in development of casing type details // Virtual and Rapid Manufacturing :Advanced Research in Virtual and Rapid Prototyping. London : Taylor & Francis,[2007]. p. 747-752.* Nekrassov, G., Portjanski, L. Knowledge representation for subassembly designingusing CBR methodology // Virtual and Rapid Manufacturing : Advanced Research inVirtual and Rapid Prototyping. London : Taylor & Francis, [2007].* Nešumajev, D., Tiikma, T. Radiation heat transfer of turbulator inserts in gas-heatedchannels // Advances in Heat Transfer : proceedings of the 5 th Baltic Heat TransferConference : St.Petersburg (Russia), September 19–21, 2007. 2. St.Petersburg :St.Petersburg State Polytechnic University Publishing House, 2007. p. 525-531.103