MEHAANIKATEADUSKONDSergejev, F. Investigation of the fatigue mechanics aspects of PM hardmetals andcermets. Tallinn : TUT Press, <strong>2007</strong>. 108 p. (Theses of Tallinn University ofTechnology. E, Thesis on mechanical and instrumental engineering ; 38).Ševtšenko, E. Intelligent decision support system for the network of collaborativeSME-s. Tallinn : TUT Press, <strong>2007</strong>. 114 p. (Theses of Tallinn University ofTechnology. E, Thesis on mechanical and instrumental engineering ; 39).Tammaru, T. (tlk.). Kvaliteedijuhtimissüsteemid : alused ja sõnavara = Qualitymanagement systems : fundamentals and vocabulary. [Tallinn] : EestiStandardikeskus, <strong>2007</strong>. II, 67, [1] lk. (Eesti standard ; EVS-EN ISO 9000:<strong>2007</strong>).Vares, V., Soosaar, S. et al. Analyses of energy supply options and security of energysupply in the Baltic States. Vienna : International Atomic Energy Agency, <strong>2007</strong>. 323p. (IAEA-TECDOC ; 1541).ArtiklidAbiline, I., Laaneots, R., Nanits, M., Riim, J. On the uncertainty of measurement bymeasuring the form of a surface // Proceedings of the Estonian Academy of Sciences.Engineering. 13 (<strong>2007</strong>) 2, p. 84-93.Aleksandrova, O., Kers, J. Romusõidukites sisalduvate plastide taaskasutamine //Keskkonnatehnika (<strong>2007</strong>) 1, lk. 34-37.Antonov, M., Hussainova, I., Pirso, J., Volobujeva, O. Assessment of mechanicallymixed layer developed during high temperature erosion of cermets // Wear. 263(<strong>2007</strong>) 2, p. 878-886.* Arjassov, G., Petritšenko, A. Free vibration of floor structures of platformsuperstructures of trucks // Proceedings of 22 th International ConferenceMathematical Modelling in Mechanics of Solid and Structures by Boundary & FEM :St.Petersburg, September <strong>2007</strong>. St.Petersburg : St.Petersburg State PolytechnicUniversity Publishing House, <strong>2007</strong>. p. 41-42.* Arjassov, G., Petritšenko, A. On development of the improved method of finitedifferences // Proceedings of Fourth International Workshop Meshfree Methods forPartial Differential Equations : Bonn, Germany, September <strong>2007</strong>. Bonn : Universityof Bonn, <strong>2007</strong>. p. 58.Arro, H., Loosaar, J., Pihu, T., Prikk, A. Estonian oil shale power plant's ash handlingproblems // Energy and sustainability. Southampton : WIT Press, <strong>2007</strong>. p. 247-255.(WIT transactions on ecology and the environment ; 105).Christophe, F., Sell, R., Coatanea, E., Tamre, M. System modeling combined withdimensional analysis for conceptual design // 8 th International Workshop on Researchand Education in Mechatronics <strong>2007</strong> : 14–15 June <strong>2007</strong>, Tallinn, Estonia. [Tallinn] :TUT Press, <strong>2007</strong>. p. 229-234.Dedov, A., Klevtsov, I., Lausmaa, T., Nešumajev, D. Method of small samples forassessment of properties of power plant components : sampling devices and stress98
<strong>PUBLIKATSIOONID</strong>concentration in dimples // Baltica VII : life management and maintenance for powerplants. Vol. 2. Espoo : VTT, <strong>2007</strong>. p. 180-192.* Grossschmidt, G., Harf, M. Design of a hydraulic-mechanical load-sensing systemusing object-oriented modelling and simulation // 21 st European Conference onModelling and Simulation : ECMS <strong>2007</strong> : Simulations in United Europe : June 4 th –6 th , <strong>2007</strong>, Prague, Czech Republic. Prague : European Council for Modelling andSimulation, <strong>2007</strong>. p. 383-390.Hlebnikov, A., Siirde, A., Paist, A. Basics of optimal design of district heatingpipelines diameters and design examples of Estonian old non-optimised districtheating networks // 4 th International Symposium Topical Problems of Education in theField of Electrical and Power Engineering. Doctoral School of Energy andGeotechnology : Kuressaare, Estonia, January 15–20, <strong>2007</strong>. [Tallinn] : Elektriajam,<strong>2007</strong>. p. 149-153.* Hlebnikov, A., Siirde, A., Paist, A. Optimal dimensioning of Estonian old nonoptimiseddistrict heating networks // Scientific proceedings of Riga TechnicalUniversity. Serija 4, Pover and electrical engineering. 20/21 (<strong>2007</strong>) p. 55-62.* Hlebnikov, A., Siirde, A., Paist, A. Estimation of thermal insulation efficiency ofEstonian district heating networks // Advances in Heat Transfer : proceedings of the5 th Baltic Heat Transfer Conference : St.Petersburg (Russia), September 19–21, <strong>2007</strong>.St.Petersburg : St.Petersburg State Polytechnic University Publishing House, <strong>2007</strong>.Hussainova, I., Antonov, M. Assessment of cermets performance in erosive media //International journal of materials & product technology. 28 (<strong>2007</strong>) 3/4, p. 361-376.Hussainova, I., Pirso, J., Antonov, M., Juhani, K., Letunovitš, S. Erosion and abrasionof chromium carbide based cermets produced by different methods // Wear. 263(<strong>2007</strong>) 2, p. 905-911.Hussainova, I. Microstructural design of ceramic-metal composites for tribologicalapplications // Advances in composite materials and structures. 334/335 (<strong>2007</strong>) p.125-128.Ingermann, K., Kask, Ü., Maandi, K., Kask, L. Eesti avaliku sektori hoonete soojusjakoguenergiatarbe analüüs // Keskkonnatehnika (<strong>2007</strong>) 8, lk. 18-21.* Juhani, K., Pirso, J., Viljus, M. The influence of Sinter/HIP sintering on theproperties of chromium carbide based cermets // Proceedings of European PowderMetallurgy Congress : EURO PM<strong>2007</strong> : Toulouse (France), 15–17 October <strong>2007</strong>.Vol. 1. [S.l.] : European Powder Metallurgy Association, <strong>2007</strong>. p. 209-213.* Karaulova, T., Preis, I., Marquis, G. Reliability analysis of dynamicaly loadedsystems // Annals of DAAAM for <strong>2007</strong> & proceedings of the 18 th InternationalDAAAM Symposium "Intelligent Manufacturing & Automation" : October <strong>2007</strong>,Zadar, Croatia. Vienna : DAAAM International Vienna, <strong>2007</strong>. p. 367-368.Karjust, K., Küttner, R., Pohlak, M. Technology design of composite parts // Journalof achievements in materials and manufacturing engineering. 22 (<strong>2007</strong>) 2, p. 23-26.99
- Page 6 and 7:
EHITUSTEADUSKOND* Kalamees, T., Kur
- Page 8 and 9:
EHITUSTEADUSKOND* Lapimaa, T. Envir
- Page 10 and 11:
EHITUSTEADUSKONDNational Congress o
- Page 13 and 14:
PUBLIKATSIOONIDRisthein, E. (koost.
- Page 15 and 16:
PUBLIKATSIOONIDBolgov, V., Järvik,
- Page 17 and 18:
PUBLIKATSIOONIDKallaste, A., Kilk,
- Page 19 and 20:
PUBLIKATSIOONIDMägi, M. Analysis o
- Page 21 and 22:
PUBLIKATSIOONID* Roasto, I., Vinnik
- Page 23 and 24:
PUBLIKATSIOONIDTimm, U., Niitlaan,
- Page 25 and 26:
PUBLIKATSIOONIDVästrik, A. EMC 200
- Page 27 and 28:
PUBLIKATSIOONID* Ilvest, J.jr, Teic
- Page 29 and 30:
PUBLIKATSIOONIDMäeltsemees, S. Vis
- Page 31 and 32:
PUBLIKATSIOONIDUudelepp, A. Propaga
- Page 33 and 34:
PUBLIKATSIOONIDProcessing : ICICS 2
- Page 35 and 36:
PUBLIKATSIOONIDGordon, R., Väisän
- Page 37 and 38:
PUBLIKATSIOONIDJervan, G., Orasson,
- Page 39 and 40:
PUBLIKATSIOONIDConference on Applie
- Page 41 and 42:
PUBLIKATSIOONIDLumiste, Ü., Võhan
- Page 43 and 44:
PUBLIKATSIOONID* Petlenkov, E. NN-A
- Page 45 and 46:
PUBLIKATSIOONID* Robal, T., Kalja,
- Page 47 and 48: PUBLIKATSIOONID* Tšahhirov, I., La
- Page 49 and 50: PUBLIKATSIOONIDaastakonverentsi art
- Page 51 and 52: PUBLIKATSIOONIDAnnuste, T., Laos, K
- Page 53 and 54: PUBLIKATSIOONIDGrossberg, M., Krust
- Page 55 and 56: PUBLIKATSIOONID(COD) of phenolic wa
- Page 57 and 58: PUBLIKATSIOONIDLuik, H., Luik, L.,
- Page 59 and 60: PUBLIKATSIOONIDOja Acik, I., Madara
- Page 61 and 62: PUBLIKATSIOONIDSuurpere, A., Saks,
- Page 63 and 64: PUBLIKATSIOONIDVaher, K., Laos, K.,
- Page 65 and 66: PUBLIKATSIOONIDKerem, K., Randveer,
- Page 67 and 68: PUBLIKATSIOONIDAlver, J., Alver, L.
- Page 69 and 70: PUBLIKATSIOONIDAlver, L. Rahvusvahe
- Page 71 and 72: PUBLIKATSIOONIDKallaste, K. Kas fü
- Page 73 and 74: PUBLIKATSIOONIDKristjuhan, Ü. Vist
- Page 75 and 76: PUBLIKATSIOONID* McGee, R.W., Alver
- Page 77 and 78: PUBLIKATSIOONIDReinhold, K., Tint,
- Page 79 and 80: PUBLIKATSIOONIDTepp, M. Organisatsi
- Page 81 and 82: PUBLIKATSIOONIDPais, E. Inverse pro
- Page 83 and 84: PUBLIKATSIOONIDEhala, S., Vaher, M.
- Page 85 and 86: PUBLIKATSIOONIDIlmarinen, K., Allik
- Page 87 and 88: PUBLIKATSIOONID* Komissarova, T., K
- Page 89 and 90: PUBLIKATSIOONID* Makarõtševa, N.,
- Page 91 and 92: PUBLIKATSIOONIDPuusemp, P. Ants Sä
- Page 93 and 94: PUBLIKATSIOONIDSinivee, V. F-PIC, e
- Page 95 and 96: PUBLIKATSIOONIDValmsen, K., Boeglin
- Page 97: PUBLIKATSIOONIDLillepea, L. (tlk.)
- Page 101 and 102: PUBLIKATSIOONIDInternational Confer
- Page 103 and 104: PUBLIKATSIOONIDKüttner, R., Karjus
- Page 105 and 106: PUBLIKATSIOONIDon Clean Steel, Hung
- Page 107 and 108: PUBLIKATSIOONIDRose, V., Podgurski,
- Page 109 and 110: PUBLIKATSIOONIDGallagher, T. ; (tlk