2 - Schempp-Hirth
2 - Schempp-Hirth
2 - Schempp-Hirth
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SCHEMPP-HIRTH FLUGZEUGBAU GmbH., KIRCHHEIM/TECK<br />
Ventus-2a REPAIR INSTRUCTIONS<br />
Ventus-2b<br />
REPAIR INSTRUCTIONS FOR „Ventus-2a“ AND „Ventus-2b“<br />
The components of these sailplanes are constructed as follows:<br />
1. Wing<br />
CFRP/foam-sandwich, with HEREX C 70.55,<br />
thickness 6 mm and 8 mm (0.24 and 0.31 in.)<br />
2. Ailerons<br />
Inboard:<br />
Mid and<br />
CFRP/foam-sandwich, with HEREX C 70.55,<br />
thickness 4 mm (0.16 in.)<br />
outboard: Pure CFRP-shell<br />
3. Winglet<br />
Pure GFRP/CFRP-shell<br />
4. Fuselage<br />
Forward section: Pure CFRP/Kevlar/GFRP-shell<br />
Aft section: Pure CFRP-shell<br />
5. Fin<br />
GFRP/foam-sandwich, with HEREX C 70.55,<br />
thickness 6 mm (0.24 in.)<br />
6. Rudder<br />
GFRP/foam-sandwich, with HEREX C 70.55,<br />
thickness 4 mm (0.16 in.)<br />
7. Horizontal stabilizer<br />
GFRP/foam-sandwich, with HEREX C 70.55,<br />
thickness 6 mm (0.24 in.)<br />
8. Elevator halves<br />
Pure CFRP-shell<br />
January 2003<br />
Revision 1 TN-No. 349-27 - 1 -
Change language