Catalogue of Polosh Technologies 2012 Part 2 - Polonia

Recommendations

Info

Contact Person Data Department of Non-Ferrous Metal Alloys Aleksander Fajkiel, PhD, Eng. phone: + 48 12 26 18 284, fax: + 48 12 266 08 70 e-mail: fajkiel@iod.krakow.pl Department of Non-Ferrous Metal Alloys Piotr Dudek, PhD, Eng. phone.: +48 12 26 18 473 fax: +48 12 266 08 70 e- mail: grap@iod.krakow.pl 226
“Studies of casting properties and determination of quality requirements for products cast from magnesium alloys designated for further decorative and protective surface treatment”. The research work was carried out within the target project: UDA-POIG.01.04.00-16-001/08- 00/UDA-POIG.04.01.00-16-001/08-00 "Innovative technology for application of coatings on magnesium castings at Polmag " and it covered complex development of technology enabling application of decorative and protective coatings on die castings made from selected magnesium alloys, allowing for the specific character of the hot chamber die casting process. The scope of work included: � identifying requirements regarding the surface condition of castings, including the casting surface defects such as folds, streaks, flower outlines, etc � assessment of surface quality for the presence of elements from the technological process, including the phase analysis of chemical compounds present on the surface of castings, � selection of technological parameters of the casting process for better surface quality. The composition of the decorative and protective coatings and the process of their deposition on the test magnesium alloy die castings have been developed within the framework of cooperation with the IMN OML - Skawina. The end result of the work was the development of guidelines for pressure die casting parameters to achieve the required surface quality of magnesium alloy castings necessary for the application of protective and decorative coatings. Contact Person Data Department of Non-Ferrous Metal Alloys Aleksander Fajkiel, PhD, Eng. phone: + 48 12 26 18 284, fax: + 48 12 266 08 70 e-mail: fajkiel@iod.krakow.pl Department of Non-Ferrous Metal Alloys Piotr Dudek, PhD, Eng. phone.: +48 12 26 18 473 fax: +48 12 266 08 70 e- mail: grap@iod.krakow.pl 227
Page 1 and 2: Catalogue of technologies developed
Page 3 and 4: Research and development works incl
Page 5 and 6: 2) IMPROVEMENT OF CARBON DIOXIDE PU
Page 7 and 8: 4) SATURATION OF NATURAL GAS IN AMM
Page 9 and 10: 6) METHOD FOR REDUCTION OF NITROUS
Page 11 and 12: FOUNDRY RESEARCH INSTITUTE (Instytu
Page 13 and 14: � shaping the structure and mecha
Page 15 and 16: PROJECTS: 1) "Development of techno
Page 17 and 18: among others, castings of rotor bla
Page 19 and 20: Contact Person Data Head of Center
Page 21 and 22: 2) Area V Functional metal matrix m
Page 23: 3) Area VII Disposal and recycling
Page 27 and 28: „Studies of the effect of various
Page 29 and 30: „Complex technologies for the man
Page 31 and 32: Contact Person Data Head of Center
Page 33 and 34: INDUSTRIAL CHEMISTRY RESEARCH INSTI
Page 35 and 36: method”. Market competitiveness I
Page 37 and 38: Patents Patent application P-386 86
Page 39 and 40: 4) Separation and purification of s
Page 41 and 42: pressure. Then it is directed to a
Page 43 and 44: � acid value, (AV) 27 mg KOH/g
Page 45 and 46: Equipment A glass reactor with bott
Page 47 and 48: Equipment The apparatus set to synt
Page 49 and 50: processing. Easy control of the pro
Page 51 and 52: 11) Polymeric composites with silic
Page 53 and 54: 12) Poly(vinyl chloride) nanocompos
Page 55 and 56: 13) Thermoplastic starch (TPS) Biod
Page 57 and 58: 14) Polyurethane sealants and coati
Page 59 and 60: 15) Polyurethane, silicone-urethane
Page 61 and 62: 16) General purpose silicone grease
Page 63 and 64: � viscometer or rheometer. Patent
Page 65 and 66: References Awards received on abroa
Page 67 and 68: Market competitiveness At present n
Page 69 and 70: Patents Patent application No P-378
Page 71 and 72: Market competitiveness Attractive p
Page 73 and 74: Patents Patent application No P-175
Page 75 and 76:
References A piece of geonet, produ
Page 77 and 78:
25) Complex processing of the pyrol
Page 79 and 80:
26) Modified petroleum asphalt The
Page 81 and 82:
Market competitiveness On the Polis
Page 83 and 84:
nanopowders. The main benefit for p
Page 85 and 86:
29) Volatile brazing flux The objec
Page 87 and 88:
OFFERS FOR COOPERATION 1) Izowin-S
Page 89 and 90:
2) Spinalpep - a nutraceutical comb
Page 91 and 92:
Market competitiveness Neither SBS
Page 93 and 94:
Market competitiveness No similar s
Page 95 and 96:
Type of expected cooperation Cooper
Page 97 and 98:
7) Application of graphite and grap
Page 99 and 100:
8) Polyesterols for polyurethanes A
Page 101 and 102:
9) Halogen-free flame retardant epo
Page 103 and 104:
10) Polymer miscibility modifiers A
Page 105 and 106:
11) Polymeric composites with metal
Page 107 and 108:
12) Modification of thermoplastic m
Page 109 and 110:
13) Melamine salts The subject of t
Page 111 and 112:
Advancement of proceedings Implemen
Page 113 and 114:
16) Revulcanization of comminuted t
Page 115 and 116:
Advancement of proceedings Based on
Page 117 and 118:
19) Production of glycerol polyalky
Page 119 and 120:
20) Gliperol - a new biofuel Produc
Page 121 and 122:
21) Benzalkonium lactates Benzalkon
Page 123 and 124:
Page 125 and 126:
and under reduced pressure. Advanta
Page 127 and 128:
23) Dialkyldimethylammonium mandela
Page 129 and 130:
Page 131 and 132:
Advantages of the technology offere
Page 133 and 134:
25) Production of alkaline hydrogen
Page 135 and 136:
1) Analysis and characterization of
Page 137 and 138:
� the studies of surface structur
Page 139 and 140:
Contact Person Data Joanna Sołtysi
Page 141 and 142:
Contact Person Data Dorota Kolasa,
Page 143 and 144:
5) The structural studies of solid
Page 145 and 146:
� determination of particle size
Page 147 and 148:
� determination of static and dyn
Page 149 and 150:
We offer services concerning: PROCE
Page 151 and 152:
If you would like to be sure that S
Page 153 and 154:
� Acid-based cleaning agent Agent
Page 155 and 156:
INSTITUTE FOR CHEMICAL PROCESSING O
Page 157 and 158:
1) Biomass Gasification - Electrici
Page 159 and 160:
3) KARBOTERM - waste plastics utili
Page 161 and 162:
INSTITUTE FOR ENGINEERING OF POLYME
Page 163 and 164:
composites and nanocomposites based
Page 165 and 166:
Equipment A and AZ type for thicken
Page 167 and 168:
Institute runs secretariats of foll
Page 169 and 170:
Our partners represent all sorts of
Page 171 and 172:
Physical Properties Assesment Tests
Page 173 and 174:
Production of: � coatings materia
Page 175 and 176:
The scope of accreditation is avail
Page 177 and 178:
COOPERATION OFFER/DESCRIPTION OF TE
Page 179 and 180:
5) Sealing mass on the base of poly
Page 181 and 182:
8) Waterborne paint for decorative-
Page 183 and 184:
15) Equipment for the manufacture o
Page 185 and 186:
� Development and improvement of
Page 187 and 188:
2) Energy-efficient ignition furnac
Page 189 and 190:
3) Method of Liquid Steel Reheating
Page 191 and 192:
INSTITUTE OF CERAMICS AND BUILDING
Page 193 and 194:
1) APPLICATION OF ROASTED LOW-CALOR
Page 195 and 196:
2) INTERNAL PROTECTION OF CONCRETE
Page 197 and 198:
This coating technology allows to a
Page 199 and 200:
ICiMB provides the production techn
Page 201 and 202:
6) SPOUT INSERTS OF CERAMIC - METAL
Page 203 and 204:
8) CERAMIC BACKING USED TO PROTECT
Page 205 and 206:
Requirements for burning tires: - C
Page 207 and 208:
Dry blend: Basic Technical Properti
Page 209 and 210:
- 8 kg of the dry blend of the mort
Page 211 and 212:
INSTITUTE OF HEAVY ORGANIC SYNTHESI
Page 213 and 214:
1) An innovative process of propyle
Page 215 and 216:
Economic Aspects � several times
Page 217 and 218:
4) Concentrates of Fire-Resistant H
Page 219 and 220:
Advantages The plant needs no opera
Page 221 and 222:
7) VPSA-N2 and PSA-N2 Pressure Swin
Page 223 and 224:
8) Pressure-Swing Adsorption (PSA)
Page 225 and 226:
9) KOTAMINA PLUS - anti corrosion a
Page 227 and 228:
10) PHENOLIC RESINS Application Phe
Page 229 and 230:
References ICSO “ Blachownia” h
Page 231 and 232:
� Pharmacological and microbiolog
Page 233 and 234:
2) Butter modified with flaxseed oi
Page 235 and 236:
INSTITUTE OF NON - FERROUS METALS I
Page 237 and 238:
INSTITUTE OF PRECISION MECHANICS (I
Page 239 and 240:
International cooperation is carrie
Page 241 and 242:
1) GLOW DISCHARGE ASSISTED NITRIDIN
Page 243 and 244:
The new, improved version of the pu
Page 245 and 246:
Fig. 5. Cylinder liners for automot
Page 247 and 248:
Another application example of the
Page 249 and 250:
2) PEEN-IMP - new shot peening tech
Page 251 and 252:
4) Nanocrystalline Cobalt Alloy Pla
Page 253 and 254:
6) Nanostructured Co-P coating as a
Page 255 and 256:
INSTITUTE OF SECURITY TECHNOLOGIES
Page 257 and 258:
Key Project WND-POIG.01.03.01-10-00
Page 259 and 260:
� knife- and stab-proofness class
Page 261 and 262:
Achievements of the Institute: �
Page 263 and 264:
� Ag-SnO contacts for electrical
Page 265 and 266:
2) Rotary forming of axisymmetrical
Page 267 and 268:
3) Innovative technology and device
Page 269 and 270:
4) Forging crankshafts by the TR Me
Page 271 and 272:
The technology can be applied for t
Page 273 and 274:
7) Surface Engineering and Tribolog
Page 275 and 276:
8) Research on biomaterials and mat
Page 277 and 278:
) Example of a simulator used for r
Page 279 and 280:
Areas of activity: � development
Page 281 and 282:
Environmental Engineering The speci
Page 283 and 284:
Plasma Welding and Cutting In the r
Page 285 and 286:
Robotic and Mechanised Welding Proc
Page 287 and 288:
WOOD TECHNOLOGY INSTITUTE (Instytut
Page 289 and 290:
TECHNOLOGY FOR COMPOSITE PANELS MAD
show all

Catalogue of Polosh Technologies 2012 Part 2 - Polonia

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?