Catalogue of Polosh Technologies 2012 Part 2 - Polonia

comprehensive analysis of many variants of the solution without the need for a costly and
energy-intensive research carried out on true models. In the study, various programmes have
been used, among others, for material analysis (Pandat), operation (Ansys, Abaqus), and the
technology of manufacture (MAGMASOFT, Flow3D). The conversion of design or of both the
design and material requires the use of modern materials and modern manufacturing
technologies, all in close cooperation carried out between the researcher, designer and
technologist.
Contact Person Data
Center for Design and Prototyping
Stanisław Pysz, Eng.
phone: + 48 12 26 26 18 313
fax: + 48 12 266 08 70
e-mail: pysz@iod.krakow.pl
“Development of technology for casting responsible titanium alloy
elements improving in a significant way the technical parameters of
the equipment manufactured for the automotive industry, chemical
industry, and medical applications”.
A utilitarian objective is to develop a technology for the production of precision castings in
reactive metal alloys, using water-based binders prepared from the colloidal solutions in SiO2,
Y2O3, ZrO2 and CeO2, thus significantly reducing the thickness of the surface layer of casting.
This should enable undertaking the commercial production of small responsible castings
requiring in practice nearly no expensive machining.
Contact Person Data
Center for Design and Prototyping
Wojciech Leśniewski, MSc, Eng.
phone: + 48 12 26 18 302
fax: + 48 12 266 08 70
e-mail: wles@iod.krakow.pl
234