Magellan 8500Xt - Koncept-L

Laser and Product SafetyLaser safety requirements are based on IEC Standard Publication 60825-1(2001) and CDRH 21CFR, Chapter 1, Subchapter J and (CDRH) LaserProduct Performance Standard, User information [1040.10(h)1]:• User Maintenance. No user maintenance of the system other thancleaning of the scan windows is required.• Radiant Energy. The scanner is an IEC Class 1 and CDRH IIalaser product. The system uses two embedded Class 3B VisibleLaser Diodes (VLDs) operating at 650.0 or 670.0 nm, in anopto-mechanical scanner, resulting in less than 3.9µW radiatedpower as observed through a 7mm aperture and averaged over 10seconds. Maximum emitted peak output power at the lower windowis 850µW. No attempt should be made by the user to removethe protective housing of the scanning-scale.• Laser Light Viewing. The horizontal and vertical scan windowsare the only apertures through which laser light may be observedin this product.Exposure to the light emitted from the scan windows has been shown notto be harmful. The safety record of barcode scanning is perfect after millionsof hours of use worldwide. This safe and efficient use of laser technologyhas gained wide acceptance in industries throughout the world.Operators and installers of the unit should observe the following cautionsand warnings:CAUTIONUse of controls, adjustments or performance of procedures other than thosespecified herein may result in hazardous laser light exposure.The use of optical instruments with the scanner will increase eye hazard. (Opticalinstruments include binoculars, microscopes, telescopes and magnifyingglasses. This does not include eyeglasses worn by the user).To prevent exposure to laser light, do not remove the protective housing of thescanner. There are no user-serviceable parts inside your scanner or scanningscale.Product Reference Guide 1-11