Magellan 8500Xt - Koncept-L

UnpackingTo unpack the unit:• Inspect the package for signs of damage that may have occurredduring shipping. If damage is found, report it to your carrierimmediately.• Lift out the accessory box containing the AC/DC Power Supply,optional Remote Scale Display and cable (if present), and theQuick Reference Guide.• Remove the Quick Reference Guide and familiarize yourself withthe unit’s controls and features. Leave the guide at the checkstandwhen the installation is complete.• Remove the protective packing and carefully lift the unit from thecarton. Be sure to save the box and all packing material. In theevent of failure, the unit must be returned to the factory in itsoriginal packaging.• Carefully lift off the All Weighs Platter as shown in Figure 2-25and remove the protective foam pieces securing the weigh mechanism.Set the platter back in place.NOTEFor added protection during shipment, the All Weighs Platter is coveredwith a tight-fitting layer of vinyl as shown in Figure 2-13. This vinyl layerMUST BE REMOVED before placing the unit into service.Figure 2-13. Remove Protective VinylProtective vinylMUST be removedfrom theplatterbefore use.(Models vary)• Proceed to the Operational Verification instructions below.Product Reference Guide 2-19