Rolera EM-C 2 User Manual - QImaging

More documents

Recommendations

Info

Imaging Software for Your CameraIndustry Standard Imaging ApplicationsThe Rolera EM-C 2 works with industry-standard Windows and Mac OS imaging software.QCapture Suite SoftwareThe Rolera EM-C 2 operates on both Windows and Mac OS based systems. QCapture Suite Softwarefor both systems is available at WWW.QIMAGING.COM. The easy-to-use QCapture software gives youcomplete control over the camera’s settings and image capture functions. QCapture Suite alsoincludes a TWAIN-compliant interface that allows many Windows image-editing applications toacquire images using QImaging cameras.3
INSTALLATIONCHAPTER 2IMPORTANT: Follow these steps in order to complete the installation.DO NOT CONNECT the camera until the camera driver is installed.1. Windows PC users only: Install the IEEE 1394 PCI-Express card - only if necessary.2. Imaging Software - Install the software and drivers that your new QImagingcamera needs to capture images.3. Rolera EM-C 2 - Connect the camera to your computer using the included IEEE 1394 cable.DO NOT CONNECT the camera until you have a functioning FireWire port inyour computer and the camera driver is installed.Step 1. Install the 1394 PCI-Express card (WindowsUsersOnly)This step is for Windows PC users only. If you are installing the Rolera EM-C 2computer, please skip to Step 2.on a Mac OSCheck your computer for an existing FireWire port:The Rolera EM-C 2 connects to your Windows PC via a FireWire port. If you already have a FireWireport, you may not have to install the IEEE 1394 PCI-Express card. Check the connectors at the backof your PC for a port that matches the FireWire port of the connection shown in Figure 1 or Figure2.CameraComputerFigure 1 — 9-pin to 9-pin FireWire (IEEE 1394) Port connection (recommended)If your PC does not have a functioning FireWire port, you must install the IEEE 1394 PCI-Express cardthat came with your camera.If necessary, install the included IEEE 1394 PCI-Express card:• Shut down your computer.• Open the case, and install the included IEEE 1394 card into an empty PCI slot. See the user’smanual for your computer for complete instructions on installing new PCI-Express cards.• Restart your computer. Windows should automatically install the appropriate softwaredrivers for the card.4
Page 2 and 3: Rolera EM-C 2 User’s ManualApplic
Page 4 and 5: INTRODUCTIONCHAPTER 1The QImaging®
Page 8 and 9: Step 2. Install Your Imaging Softwa
Page 10 and 11: CAMERA BASICSCHAPTER 3The Rolera EM
Page 12 and 13: CHAPTER 4ADVANCED CAMERA CONTROLSTh
Page 14 and 15: Gain and Offset ControlsThe Rolera
Page 16 and 17: TROUBLESHOOTINGCHAPTER 6Resolving P
Page 18 and 19: GLOSSARYBinningBinning is a method
Page 20 and 21: APPENDICESAPPENDIX A: External Trig
Page 22: Input SignalsIn order to use the Ex

Rolera EM-C 2 User Manual - QImaging

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?