Cat. 3 Custom Made Chain - Tsubaki Europe

ANSI LAMBDA LUBE FREE HEAVY DUTY ROLLER CHAINThe superior performance of TSUBAKI ANSI Heavy Duty Lambda chains is the resultof a comprehensive quality control network that begins with selection of the world’sfinest steel materials. It combined the advantage of Lambda Roller Chain, with thebenefits of the Heavy Duty H series.TSUBAKI offers Heavy Duty Lambda chains for applications that exceedthe capabilities of TSUBAKI ANSI Lambda roller chain. HeavyDuty chain should be considered in the following situations:1. Harsh environments where the chain will be subjected toheavy impact.2. Compact drives for equipment or machines that must workin tight spaces.3. When higher transmission power, allowable load or tensilestrength is required.4. When a lower rate of elastic elongation is required.Heavy Duty Lambda Chain SeriesHeavy Duty Lambda Series chain differs only from the StandardLambda Series chain in the thickness of the link plates. The linkplates have the same thickness as the link plates of the nextlarger pitch sizeThe increased thickness of the link plates provides a 10%greater capacity for absorbing shock loads. In short, LMD-HSeries chains are especially suitable for situations where the loadis heavy and operating speed is low (up to 50 m/min) or whereoperating conditions are severe.The Heavy Duty Lambda Roller chain is only available in Duplexexecution.Sprockets:Sprockets need to be customised due to the thickness of the rollerlink plates.Due to the extended lifetime of ANSI LAMBDA chain, TSUBAKIadvises to install sprockets with hardened teeth in every LAMBDAapplication.AdvantagesTSUBAKI has enhanced the ANSI HEAVY DUTY LAMBDA with thefollowing advantages:Higher Shock Load ResistantSuitable for high shockloads.Save Maintenance CostsNo expensive labour costs as it is not required to manuallylubricate this chain.Save Purchasing CostsLower frequency of purchasing due to the high quality of thechain and its long economic life. No purchasing of lubricants orlubrication systems necessary.Higher ProductivityNo unforeseen downtime due to chain breakdown.Less time required for maintenance and therefore more timefor production.Environmental FriendlyApplications run clean thus reducing the risk of contaminatingproducts, machines, floor etc.12 Innovation in Motion