Electrical - Paynes Marine Group

Electrical 187PerkoHEAVY DUTYBATTERY DISCONNECT SWITCH• Capacity: 450 amps continuous• For use with systems under 50 volts• 1200 Amps intermittent (15 seconds on, 5 minutes off)9703-DPHellaBATTERY SWITCHSeawater resistant, water and dust-proofaccording to IPX 4 (DIN 40050).Housing: Black, plasticKey:Red, plasticMax. Load:8718187185 Spare key1000 A at 12 V (10 sec.)500 A at 24 V (10 sec.)Cole HerseeDUAL BATTERYSELECTOR AND MASTERDISCONNECT SWITCHES310 amps continuous, 500 amps intermittentM750BPHellaHEAVY DUTY BATTERY SWITCHFor high loads, water and dust-proof according to IPX 2 (DIN 40050).Housing: Black, plasticMounting keyand plate: SteelMax. Load: 5000 A at 12 V (10 sec.)2500 A at 24 V (10 sec.)001559001GuestEXTRA HEAVY DUTYON / OFF SWITCHExtra heavy duty version of the 2303A designed for maximum service.Rating 600 amps continuous, 1000 amps momentary starting with fielddisconnect. 5-1/2" square.2304ACole HerseeMASTER DISCONNECTSWITCHES175 amps continuous, 800 amps intermittent,15 seconds on, 5 minutes offMounting stem: brass, 3/4” Dia.3/8” copper studs with silver laminated contactsM284BP 5/16” max panel thicknessSea-DogBATTERY SWITCH WITH KNOBInjection molded nylon/machined brass. Off/1/Both/2positions. 300 amps.422760Sea-DogBATTERY SWITCHMachined brass/molded bakelite. Not UL listed.5" x 1-7/8", 210 Amps422750BEPTWIN ENgINES, TWO BATTERY BANKSBATTERY BANK CLUSTERThe 715-S is designed for systems with twin engines and 2 banksof batteries. The house loads can be switched between port andstarboard battery. The selector switch can also be used to parallel thebatteries when in both positions.Dimensions 8.2"L x 2.7"W x 3"HBEP715-S