Electrical - Paynes Marine Group

Electrical 199XantrexXM MODIFIED SINE-WAvE INvERTERSDesigned for marine electrical systems that already have a battery charger or generator installed, Xantrex XM invertersdeliver modified sine wave power for small appliances, TVs and other onboard electronics from a battery bank.• Built-in 20A transfer switch automatically transfers between incoming AC power and inverter power• Digital remote displays power output, AC source and battery voltage• Detachable remote can be mounted wherever convenient• Designed to be hard-wired using a terminal strip or by connecting AC through a GFCI receptacle (included)• Battery over-voltage and under-voltage protection• Over temperature shutdown• Short circuit protection• Ground fault protection• Reverse polarity protectionMaximum continuous power 1000W (XM1000), 1800W (XM1800)Surge rating (5 seconds) 2000W (XM1000), 3600W (XM1800)806-1010 XM1000, 4"H x 9"W x 12.5"D806-1810 XM1800, 4"H x 9"W x 15"DXantrexPROSINE TRUE SINE-WAvE INvERTERSPROsine inverters are ideally suited for power systems that already have a quality multistage battery charger. Offering True Sine WaveAC output, PROsine inverters are built to operate mid-range inductive loads. Their lightweight and compact design makes installationeasy. PROsine inverters have an optional integrated 15A transfer relay for seamless transition from shore to inverter power. They include aremovable digital LCD panel to provide operating status and control from a remote location. Removable LCD display - requires optional remoteinterface kit.• Lightweight and low profile• Innovative DC connection terminals, designed to accept battery cables in 180° of rotation• LCD displays DC Volts, DC Amps and output power• Optional transfer switch available• 12V and 24V models available• CSA/NRTL certified to UL and CSA standards• Over temperature shutdown and automatic overload protection• Short circuit and AC backfeed protectionContinuous Transfervolt Watts Surge Switch806-1000 12 1000 1500 N/A806-1002 12 1000 1500 15Amp806-1800 12 1800 2900 N/A806-1802 12 1800 2900 15Amp806-1850 24 1800 2900 N/A806-1852 24 1800 2900 15Amp808-1800 Optional remote interface kitXantrexFREEDOM XMICMODIFIED SINE-WAvE INvERTER/CHARGERSWith modified sine wave output, Freedom XMIC are designed to run entertainmentsystems and small appliances in smaller boats. They are the smallest, lightest andleast expensive models in the Xantrex line up. Designed for demanding marineand RV conditions. Temperature-controlled multi stage charging ensures that yourbatteries are recharged safely and efficiently. Includes an automatic transfer switchand a detachable digital remote control panel display that provides precise systeminformation and can be mounted wherever you require the information.• Removable digital display to provide system status• Automatic three-stage battery charger• Battery type settings: Flooded/gel/AGM/Fixed 13.5 Vdc• Designed to be hard wired using a terminal strip, or by connecting AC throughGFIC receptacles• Built in 30-amp relay to automatically transfer between inverter power andincoming AC utility power• Protection includes: Battery over/under voltage protection, over temperatureshutdown, auto overload protection, short circuit protection and ground-faultprotectionModel volts Output Charger Dimensions806-1020 XMIC1000 12 1000W 20A 4.92"H x 8.3"W x 15.47"L806-1840 XMIC1000 12 1800W 40A 4.92"H x 8.3"W x 17.44"L