5SNCP6P?NN 'VF?SQR 5WQRCKQ #@MSR %F?NRCP - Rute66

A08028A08041A08057ARLEN NESS HANDLEBARSNOTE: HANDLEBARS WITH BUILT-IN RISERS REQUIRECHROME ALLEN MOUNTING BOLT KIT ZPN A01471Each design is available for the following applications:1 1/4” With built-in risers: Features 1 1/4” fat look tubingwith 1” long built-in risers. These bars bolt directly to yourtop triple tree and are drilled for internal wiring.1” With built-in risers: Features 1” tubing with 1” long builtinrisers. These bars bolt directly to your top triple tree andare drilled for internal wiring.1 1/4” for 1 1/4” clamps: These bars are designedexclusively for Ness-Tech 1 1/4” riser assemblies and aredrilled for internal wiring. Will not work with factory stylehandlebar clamp assemblies.1 1/4” for factory 1” clamps: These bars are designedto work with 1” factory handlebar clamp assemblies(except FLSTS and FXSTS). They are pre-drilled forinternal wiring.1” With indents: These bars can be used on models 1982to present applications.1” Without indents: These bars can be used on mostuniversal applications.1 1/4” FXSTS, FLSTS: These bars fit exclusively factorySpringer models. They are pre-drilled for internal wiring.Styles:Dresser: 10” rise x 11” pullback x 34 1/2” widthFlat Track: 8” rise x 12 1/2” pullback x 29” widthApehanger: 22” rise x 9” pullback x 35” widthDrag: 0” rise x 6” pullback x 30” widthA08024A08016A08058Size Dresser Flat Track Apehanger1 1/4” with built-in risers N/A A08024 A080281 1/4” for factory clamps N/A A08057 A080581 1/4” for 1 1/4” clamps A08041 N/A N/A1” with built-in risers A08025 N/A A080271” with indents N/A A08016 N/A1” without indents N/A A08015 N/A26-033