derayÂ®-iakt ns - DSG-Canusa

More documents

Recommendations

Info

Air Conditioning PipesDERAY®-HB NSAir Conditioning PipesIn the engine compartment of motor vehicles,aluminium pipes of air conditionersare exposed to numerous environmentalinfluences. Primarily, they are tobe protected against mechanical damage,corrosion and the diffusion effect ofmineral greases and oils.Specially modified heat shrink tubingbased on cross-linked polyolefins meetssuch needs perfectly.AdvantagesFast shrinkage on to part requiringprotectionGood adhesion to the aluminiumpipe, even without additionaladhesive liningNo detachment of heat shrinktubing from the aluminium pipeswhen being bent, particularly inthe fold/bend areaAbrasive protection even underextreme temperaturesCorrosion protectionIn its specific area of application,DERAY ® -HBNS performs impressivelythanks to its outstandingCharacteristicsContinuous operating temperature:-55°C to +135°CGood abrasive resistanceSurface can be printed via hotseal, inkjet and offset processesFlammability complies with FMVSS302 (combustion rate max. 101.6mm/min)ProcessingProcessing occurs in shrink tunnels thatare supplied as standard in the form oftwo options:DERAY ® -HST 35 100DERAY ® -HST 40 170These tunnels allow simultaneous processingof several tubes.The surface of the part to be protectedmust be free of grease and oil prior tothe shrink cover being applied. Attentionmust be given, moreover, to ensurethat the shrink covering process commencesat one end in order to preventinclusion of air.We would be pleased to advise youon the selection of the best shrinkappliance for your specific purpose atany time. Descriptions of the individualshrink appliances and of the work theyperform are included in our equipmentdocumentation that we would be pleasedto supply you with on request.The operating instructions include informationon safety matters relevant to theoperation of our shrink appliances. It isalso possible to customise shrink tunnelsor equipment to suit your specific needsand wishes.18 © ShawCor Ltd. All specifications are subject to modification. Consult DSG-Canusa for the latest specification.
AutomotiveDERAY®-HB NSDimensionsExpanded Recovered ProductInternal diameter (min.)D (mm)Internal diameter (max.)L (mm)Wall Thickness(nom.) W (mm)15,0 6,0 1,0 HB NS 15-6/1,0 sw19,0 6,0 1,0 HB NS 19-6/1,0 sw27,0 12,7 0,8 HB NS 27-12,7/0,8 swTechnical Data Current Values Test MethodsMaterial Jacket Material PE, modified, free of leadand cadmiumSurfacesemi glossySpecific gravity 1,0 g/cm 3 max. ASTM-D 792, A-IShrink ratio ≥ 2:1Longitudinal shrinkage - 6 % max. ASTM-D 2671Mechanical properties Tensile strength 20 MPa IEC 60684-2Elongation 580 % IEC 60684-2Secant modulus 170 MPa max. ASTM-D 882Thermal properties Thermal ageing (168 h at +150°C) IEC 811-1-2Tensile strength19 MPaElongation 507 %Cold bend test does not break at -55°C ASTM-D 2671 Meth. CCombustion behaviour passed FMVSS 302Shrink temperature+110°C to +200°CStorage temperature +40°C max.Continuous operatingtemperature-55°C to +135°C IEC 216Chemical properties Corrosive action non-corrosive ASTM-D 2671 Meth. AResistance against chemicals goodWater absorption 0,01 % VDE 047319
Page 5: Company1998 Canusa-EMI acquires Ger
Page 8 and 9: Automotive IntroductionDSG-Canusa s
Page 11: AutomotiveAutomotivePipes & HosesDS
Page 15 and 16: AutomotiveDERAY®-IAKT NSTechnical
Page 17: AutomotiveDERAY®-HBKTTechnical Dat
Page 21 and 22: AutomotiveDERAY®-INSTechnical Data
Page 23 and 24: AutomotiveDERAY®-DKITechnical Data
Page 25 and 26: AutomotiveDERAY®-KWS/KWS-RTechnica
Page 27 and 28: AutomotiveSplicesEnd splicesDERAY
Page 29 and 30: AutomotiveDERAY®-SPLICEMELT blackT
Page 31 and 32: AutomotiveSmall Cable BundlesDERAY
Page 33 and 34: AutomotiveDERAY®-IPM (PRESSMELT)Te
Page 35 and 36: AutomotiveDERAY®-IAKT clear (PRESS
Page 37 and 38: AutomotiveDERAY®-IHKT clear (PRESS
Page 39 and 40: AutomotiveMedium-Sized Cable Bundle
Page 41 and 42: AutomotiveDERAY®-Adhesive Strip 85
Page 43 and 44: AutomotiveDERAY®-IAKT clear (DUOME
Page 45 and 46: AutomotiveDERAY®-IHKT black (DUOME
Page 47 and 48: AutomotiveLarge Cable BundlesDERAY
Page 49 and 50: AutomotiveDERAY®-Coldmelt I 85°C-
Page 51 and 52: AutomotiveDERAY®-Coldmelt I HT 125
Page 53 and 54: AutomotiveHalf-Shell Sealing System
Page 55 and 56: AutomotiveDERAY®-COLDMELT IITechni
Page 57 and 58: AutomotiveInsulating and Protecting
Page 59 and 60: AutomotiveDERAY®-IOK Insulating Ca
Page 61 and 62: AutomotiveDERAY®-HIOK Insulating C
Page 63 and 64: AutomotiveDERAY®-BIOK 85°C System
Page 65 and 66: AutomotiveAutomatic sealing DERAY®
Page 67 and 68: AutomotiveHigh TemperatureApplicati
Page 69 and 70:
AutomotiveDERAY®-VA 25Technical Da
Page 71 and 72:
AutomotiveDERAY®-VT 220Technical D
Page 73 and 74:
AutomotiveDERAY®-KY 175Technical D
Page 75 and 76:
AutomotiveAutomotiveBraided Sleeves
Page 77 and 78:
AutomotiveCANUFIX ® Braided Sleeve
Page 79 and 80:
AutomotiveDesign: Seat belt locks a
show all

derayÂ®-iakt ns - DSG-Canusa

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?