deray®-iakt ns - DSG-Canusa
deray®-iakt ns - DSG-Canusa
deray®-iakt ns - DSG-Canusa
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
AutomotiveDERAY®-IPM (PRESSMELT)Technical Data Current Values Test MethodsMaterial Jacket Material Polyolefin, modified, free oflead and cadmiumAdhesivePE/PA/EVA-BasisSurfacesmoothSpecific gravity 1,0 g/cm 3 max. ASTM-D 792, A-IShrink ratio up to 6:1Longitudinal shrinkage -20% max. ASTM-D 2671Mechanical properties Te<strong>ns</strong>ile strength 14 Mpa IEC 60684-2Elongation 550% IEC 60684-2Thermal properties Thermal ageing (168 h at +160°C) IEC 811-1-2Te<strong>ns</strong>ile strength11 MPaElongation300 % min.Cold bend test does not break at -40°C ASTM-D 2671 Meth. CCombustion behaviour passed FMVSS 302Shrink temperature +100°C to +200°CStorage temperature +50°C max.Continuous operatingtemperature-40°C to +105°C IEC 216Chemical properties Corrosive action non-corrosive ASTM-D 2671 Meth. ACompatibility with copper non-corrosive ASTM-D 2671 Meth. BResistance agai<strong>ns</strong>t chemicals goodWater absorption 0,10 % VDE 0473Electrical properties Dielectric strength 20 kV/mm VDE 0303 Part 2Specific volume resistance 10 14 Ω x cm VDE 0303 Part 333